8mm 2ml Clear HPLC Autosampler Vial with Logo

The Screw Cap and Septa for 1.5ml HPLC Autosampler Vial are essential components for secure sealing and sample integrity in HPLC analysis. The screw cap ensures a tight and leak-proof closure, preventing any contamination or loss of samples. The septa, made of high-quality materials, provides excellent chemical resistance and ensures a reliable seal.

Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage. One piece polypropylene cap and membrane are also available. These pierceable screw thread caps are designed for one time use and reduce sample preparation time as there is no cap and seal to assemble.

Standard GC, HPLC sample vial, small caliber, 8-425 standard threaded mouth, can be used for autosampler and sample storage. It can be used with 8-425 screw cap septum.
8-425 Autosampler Vial, often used in conjunction with Shimadzu, Spectrophysics, Varian, and other autosamplers. The vial is made of colorless Class 1 Type A or Amber Class 1 Type B borosilicate glass , And attached with a writable label for sample identification.

Material: Borosilicate glass
Finish Type: Screw Neck
Color: Clear / amber
Size: 11.6*32mm
Cap: Black Polypropylene Cap
Closed-top or with 5.5mm center hole
PTFE/silicone Septa
with pre-slit

Polypropylene Screw Cap with Septa – Polypropylene screw cap with precision-fit septa provide an evaporation-proof seal. Bi-layer include silicone and PTFE. Silicone septa for multiple injections. PTFE-lined screw cap for organic samples. Screw caps provide an inert, airtight seal and direct puncture-access to samples with a syringe needle.

The screw top vial design is characterized by general ease of use, especially with autosampling systems, hence the name autosampler vial. The 1.5 ml vials are commonly referred to as 2 ml capacity vials.

Transparent viale, 33-extended borosicate glass USP type I, Class A
Step-by-step write marking spot area, 0.5, 1.0, and 1.5ml
Strict quality control to ensure a consistent size of each lot of items.
Flat bottom to ensure consistent matching between the vial and the true neck 6mm of the standard glass insert.
Caps are made of high-quality polypropylene to meet accurate manufacturing tolerances
Septum is made of the highest quality materials to ensure proper functioning

Autosampler vials are available in a variety of sizes, with 2 mL vials being the most common size. During the injection process, the autosampler needle pierces the cap and extracts the desired amount of analyte from the vial. There are different types of vials for chromatography applications.

Aijiren has been producing 2ml glass autosampler vial since 2009. The glass vials we produce are widely used all over the world. For more than ten years, our customers are in more than 70 countries and regions. Our 2mlvial is also well received by customers. Aijiren’s customer service and product quality are among the best in laboratory consumables.

Polypropylene Screw Cap with Septa – Polypropylene screw cap with precision-fit septa provide an evaporation-proof seal. Bi-layer include silicone and PTFE. Silicone septa for multiple injections. PTFE-lined screw cap for organic samples. Screw caps provide an inert, airtight seal and direct puncture-access to samples with a syringe needle.

Aijiren began to produce Autosampler Vial 20 years ago, which is often used in chromatographic analysis experiments. Aijiren uses machinery for mass production, which ensures the mass production of products. 100 pcs/pack is convenient for customers to use. The design of separate packaging for Vial and Cap. It is convenient for customers to seal after holding Autosampler Vial.

Let me introduce the material of 8-425 2ml autosampler vials, 33 Expansion borosilicate glass USP Type I Class A made of clear vial, or 51 Expansion borosilicate glass USP Type I, Class B made of Amber vial.Our glass uses neutral borosilicate and low borosilicate, but our neutral borosilicate can reach the standard of high borosilicate, and our low borosilicate can reach the standard of neutral borosilicate. We use excellent raw materials to make 8-425 2ml autosampler vials.

2ml Autosampler Vials 8-425 Neck surface finish is representative of hplc vials &GC vials, vials have a screwed outer diameter of 8 mm, thread style 425, vials are available in clear and amber, threaded caps in Lab most 2ml vials are 11.6x32mm

2ml Autosampler Vials 8-425 neck finish represents a hplc vials &gc vials, the vials a diameter of 8 mm across the outside of the threads and a thread style of 425, Vials has clear and amber, Screw Cap in Lab most of the 2ml vials are 12*32mm. The design of Aijiren screw thread top vials is developed from Europe and the United States, and the design feature is easy to use, especially the use of an automated sample introduction system. 

These vials are made of high-quality materials, such as borosilicate glass, providing excellent chemical resistance and sample stability. The clear glass construction allows for easy visibility and inspection of the sample, while the 8-425 thread ensures convenient sealing and unsealing of the vial during sample preparation and analysis.

Aijiren has been engaged in the production of 8-425 HPLC Vial with Caps for more than ten years, we have absolutely rich experience and familiar processes to produce 8-425 HPLC Vial with cap, and we can guarantee the high quality of 8-425 HPLC Vial with Cap produced by Aijiren with reasonable price.

Aijiren’s hottest 8-425 2ml Screw HPLC Vial with Cap have been introduced. Aijiren uses high-quality raw materials to make 8-425 2ml Screw Vial with Cap. Customer satisfaction and praise have made Aijiren one of the largest laboratory consumables producers in southern China. First, Aijiren will stick original intention to ensure the quality of 8-425 2ml vial.

Compared with crimping seals, threaded vials and caps have lower evaporation, reusability, less damage to hands during operation, and no special tools are required. The 8-425 neck mouth represents a vial with a diameter of 8mm. The outer diameter of the thread of the vial is 8mm, and the thread pattern is 425.

These HPLC vials feature an 8-425 thread size, making them compatible with a wide range of HPLC instruments. The precise thread design allows for a tight and reliable seal, preventing any potential leakage or contamination. The vials have a clear glass construction, enabling easy visibility and inspection of the sample.

1.5ml/2ml 8-425 autosampler vial (Shimadzu chromatography sample vial) is provided by Zhejiang Aijiren Rechnology Co., Ltd., instead of imported Shimadzu sample bottle, standard GC, HPLC sample bottle, 5MM caliber, 8-425 standard Threaded port can be used for autosampler and sample storage. It can be used with 8-425 screw cap septum. The bottle cap is made of high-quality polypropylene, and the septum is manufactured with high-quality materials to ensure the efficiency of the function.
Applicable to: Beckman, Diane, Finnigen, Gilson, LKB, Thermoelectric Thermo, Varian Varian, Shimadzu and other autosamplers.

Chromatographic autosampler vials are glass vials used for chromatographic autosampling in liquid chromatographs, gas chromatographs, mass spectrometers and other autosamplers and headspace samplers. Generally consists of a complete set of vial, cap and gasket. Its basic requirements are accurate volume, can withstand a certain pressure, good sealing performance, no adsorption effect on the sample.

If the reagent to be tested by the customer is very precious and the capacity of 2ml vial is too large, Aijiren 8-425 2ml Autosampler Vials can be used with different types of micro-insert. There are 3 types of micro-insert, 29*5mm 150uL micro-insert with mandrel interior&polymer feet, 150uL conical bottom micro-insert and 250uL flat bottom micro-insert. All three types of micro-insert can be adapted to 8-425 2ml Autosampler Vials.