4ml amber, clear, customerized laboratory glass Borosilicate glass vial

Snap Vials are manufactured from Type 1 borosilicate glass(Class A, 33 expansion borosilicate glass), available in clear or amber, or from Polypropylene. Snap Vials accept both an Aluminum Snap Seal as well as a Polyethylene Snap Cap. Excellent for short term storage. Deactivation, MS Certification is also available.

Although most laboratories have switched to 9 mm screw thread vials for a wider opening while still being autosampler compatible, some labs use 8-425 vials for storing solvents. The standard opening 8-425 vials have more threads per inch, so there is less likelihood that volatile solvents will evaporate over time.

Use Aijiren 11 mm Glass Crimp Top Vials with aluminum crimp seal closures. These high-quality 11 mm glass vials are 2 mL, 12 x 32 mm and fit most brands of autosamplers. Made of superior quality 33 expansion borosilicate clear (Type 1, Class A), they meet all requirements of US, EU, JPN Pharmacopia. Choose from Aijiren brands.

Amber Borosilicate Glass
ND9mm Screw Neck Vial
11.6*32mm
With Writing Spot
9mm Blue Short Screw PP Cap
with 6mm Centre Hole
Pre-slit / non-slit PTFE Silicone Septa
Septa Size: 9*1mm

Screw-top vials also come in different sizes, with vial caps made of either aluminum for crimp seals or plastic. Glass vials are available in 2 ml volume with a screw top. Inserts work in conjunction with any autosampler and fit either standard or wide openings vials.

Aijiren’s 9-425 Autosampler Vials are available in clear and amber colors, and Aijiren produces Cap with Septa that is matched with 9-425 Autosampler Vials. Only the Closures made of Screw Thread’s 9mm diameter PP are compatible. Septa uses PTFE and Silicone is compounded without adhesives to ensure the stiffness and quality of Septa.

1.5ml/2ml Screw neck HPLC clear vials are a type of vial used in high-performance liquid chromatography (HPLC) applications.
HPLC clear vials are made from clear glass, typically borosilicate glass, which offers excellent visibility and chemical resistance.
The clear glass allows for easy visual inspection of the sample and facilitates accurate volume measurements.
These vials are specifically designed to meet the requirements of HPLC applications, which often involve sensitive and precise analyses.
Screw neck HPLC clear vials are a type of vial used in high-performance liquid chromatography (HPLC) applications.

2ml crimp sample vials are manufactured by 33 expansion borosilicate glass. Select 2ml crimp sample vials for light-sensitive samples. This vial is equipped 11mm aluminum cap and septa. Aijiren provides 2ml amber sample vial in clear-pack trays. 2ml autosampler vial is compatible with closures come in different colors, sizes, and septa materials. Aijiren offered 2ml crimp vial with a graduation patch. Possible identification errors are eliminated. Supporting use with inserts or already possessing a conical interior shape, maximum retrieval of contents to eliminate waste.

“Aijiren Vials manufactured of Clear, Type 1 Class A or Amber, Type 1 Class B, borosilicate glass
Aijiren Vials have a standard graduated write-on patch for easy filling and identification
Snap caps used with the Aijiren Vial system are a convenient alternative to aluminum seals
Snap caps or aluminum seals ensure a secure seal for samples”

2mL Amber Glass Screw Top Autosampler Vials are available in a variety of neck finishes and opening diameters. Large mouth or wide ID vials have approximately a 40% wider mouth opening than standard opening vials. The large opening reduces the risk of bent autosampler needles during sampling. When choosing a 2mL Amber Glass Screw Top Autosampler Vials, the product material is of paramount importance.

Aijiren 9-425 HPLC Vial can choose the type with writing area and scale for easy filling and identification of samples. Aijiren 9-425 sample vials can be used with the robotic arm autosampler. The opening of the 9mm sample vial is 40% larger than that of ordinary vials to facilitate sample preparation. The Aijiren 9-425 sample vial must be used together with the 9mm screw pp bottle cap. Ensure proper fit and function.

9mm screw thread caps, septa, and vials are designed especially for use with Aijiren’s and other rotating or robotic are samplers
2ml 12*32mm clear borosilicate glass vial,with a write-in patch; high quality polypropylene caps, ptfe / silicone septa can be pre-slit to easy needle penetration

The aijiren chromatography sample vial is made of borosilicate glass and meets ASTM TYPE I ClassA and USP TYPE I standards.
There are four types: colorless and amber vial, handwriting area and no handwriting area.

If the reagent to be tested by the customer is very precious and the capacity of 2ml vial is too large, Aijiren 8-425 2ml Autosampler Vials can be used with different types of micro-insert. There are 3 types of micro-insert, 29*5mm 150uL micro-insert with mandrel interior&polymer feet, 150uL conical bottom micro-insert and 250uL flat bottom micro-insert. All three types of micro-insert can be adapted to 8-425 2ml Autosampler Vials.

Chromatography autosampler vials are widely used in chromatography, chemistry, medical and other fields. Autosampler vials are generally made of hydrolytic glass or borosilicate, with various specifications. Different vial mouth designs meet different actual needs.

HPLC vials are specially designed containers used to hold samples for injection into an HPLC instrument for analysis. These vials are made of high-quality materials such as borosilicate glass or plastic that are chemically inert and have minimal interaction with the sample.
HPLC vials are specially designed containers used to hold samples for injection into an HPLC instrument for analysis. These vials are made of high-quality materials such as borosilicate glass or plastic that are chemically inert and have minimal interaction with the sample.

The 2ml snap HPLC vial is made of type 1 borosilicate glass. Compared to 9mm screw vials, this 2ml snap hplc vial opening is a wider opening. Therefore, the 2ml snap top HPLC vial is easy to fill and increases the target area of the autosampler needle. This means that 2ml snap-top HPLC vials can protect needles.

The 2ml snap-top HPLC vial size is 11.6x32mm and is compatible with most autosamplers such as Aijiren. 2ml HPLC vials are available in amber and transparent colors. The bottom of the vial is flat. It is convenient to put. Aijiren offers 2ml snap-top HPLC vials and pads at wholesale prices.

2mL Amber Glass Screw Top Autosampler Vials are available in a variety of neck finishes and opening diameters. Large mouth or wide ID vials have approximately a 40% wider mouth opening than standard opening vials. The large opening reduces the risk of bent autosampler needles during sampling. When choosing a 2mL Amber Glass Screw Top Autosampler Vials, the product material is of paramount importance.

Snap Top 2ml HPLC Vials can accommodate 250uL Micro-inserts,The specifications of Micro-insert are 29*5.7mm, 31*5.7mm, and 31*6mm. You can choose Micro-insert according to your needs. This is more helpful for HPLC analysis of precious samples, which can save samples without causing waste.

The thread design of the 8-425 threaded sample vialcan make the septum achieve extremely strong re-tightness, so this sample vial can also be used as a storage vial, and it can also be used for autosampler. This design sample vial is mostly suitable for Shimadzu Hitachi and other Japanese enterprise instruments.

Aijiren’s 9mm hplc vials are very suitable for Autosampler, especially Aijiren’s machines, because Aijiren’s 9mm hplc vials have a long neck to facilitate the grasping of instruments, and the bottom is flat and easy to place in the sampling area, and the accuracy of the thread is guaranteed Improved the sealing performance of 9mm hplc vials. In addition, Aijiren’s Cap and Septa have types that are convenient for Autosampler to puncture. Cap has a center hole, and Septa is very convenient for puncture.

All Aijiren vials are very suitable for autosamplers and have good chemical compatibility and ultra-cleanliness. The crimp top sample bottle is currently the most commonly used gas sampling bottle on the market. The sample bottle with a volume of 2ml is especially suitable for laboratory use. At the same time, the bottom of some sample bottles is designed with a round bottom, so it has a flat bottom function and is compatible with automatic sampling equipment.

All Aijiren 11mm Crimp HPLC Vials are ideal for autosamplers and offer excellent chemical compatibility and ultra-cleanlines.
The 11mm Crimp Vial provided by Aijiren is well sealed and suitable for storing samples. It needs to be used with Decrimper and Crimper.

Aijiren’s 10-425 screw vial is made of borosilicate hydrochloric acid glass, which has the characteristics of high temperature resistance and corrosion resistance, 10-425 screw vial is very compatible with the automatic sampler with a mechanical arm.

2ml crimp top vial from Aijiren is made of high-quality borosilicate hydrochloric acid glass, which can effectively prevent chemical substances from reacting with Vial to affect the results of the experiment. The glass of Vial has two colors, Clear and Amber, and customers can put it according to the claim The characteristics of the samples are selected.

The 9mm screw HPLC autosampler sample vial is made of colorless borosilicate glass or amber 1 B grade borosilicate glass, which is a high-quality raw material. Excellent high temperature and corrosion resistance. Aijiren has strict control over the production environment. Aijiren 9mm screw HPLC autosampler sample vials have won the trust of customers.

2ml UPLC (Ultra-Performance Liquid Chromatography) glass vial refers to a specific type of vial used in analytical chemistry for storing and handling liquid samples in UPLC systems. UPLC is a high-pressure liquid chromatography technique that allows for fast and efficient separation of compounds in a liquid sample.
These vials are specifically designed to withstand the high pressures and temperatures often encountered in UPLC systems. They are typically equipped with a screw cap or a snap-on cap to provide a secure seal and prevent leakage or contamination of the sample.

9mm screw HPLC autosampler vial can be transparent or amber (mainly used to avoid light) color. The function of the 9mm screw HPLC autosampler vial is manufactured and packaged in an ultra-clean working environment. Certain packaging materials reduce contamination of delivery progress. 9mm screw HPLC autosampler vials can be applied to various types of HPLC and GC equipment especially for Aijiren.

2ml snap top HPLC vial is made of Type 1 borosilicate glass. 2ml Snap hplc Vials mouth is wider opening. So 2ml snap top HPLC vial is easier to fill and provides a larger target area for the autosampler needle. That is to say, the 2ml snap top HPLC vial can protect the needle.