33mm Sterile Syringe Filter

Polypropylene (PP) is recommended for one time use only with low vapor transmission. Polypropylene is a rigid plastic that is translucent. At room temperature, polypropylene exhibits excellent chemical resistance to acids, alcohols, and bases. Polypropylene is compatible with acetone, ethyl acetate, methanol, isobutyl alcohol, methanol, and methyl ethyl ketone. Polypropylene is incompatible with cyclohexane, ethers, dichlorobenzene, pentanes, methylene chloride, and trichlorobenzene.

The nylon membrane of the syringe filter should be compatible with the chemical characteristics of the sample. The nylon membrane should be compatible with various water-based and organic solvents. The membrane should also have high resistance to HPLC solvents and chemicals. The 0.45mm aperture ensures that you have enough capacity and throughput to process samples efficiently and quickly.

In the sample application of choosing the appropriate syringe filter and syringe, draw your sample into the syringe and place the filter on the syringe. If you are using a leur lock filter, make sure you have properly secured the filter into the syringe tip .Push a few drops through the filter with the syringe filter facing up and “top”. Place the filter in the overturned collection container and push the sample through the syringe filter by applying gentle positive pressure. The syringe filter to be cleared and the maximum To maximize sample throughput, remove the filter from the syringe and draw air into the syringe. Then reinstall the filter and push the plunger to force some air through the filter.

Polyvinylidene difluoride (PVDF):?designed for high tensile strength, high solvent resistance, and low protein binding, making them suitable for biomedical filtration, sterilization filtration, and HPLC sample preparation. pH range ~1-14.

PTFE Syringe Filters consist of a polytetrafluoroethylene (PTFE) membrane and a polypropylene overmolded housing. Available in 13 mm and 25 mm diameters and 0.22 μm and 0.45 μm pore sizes. PTFE is the membrane of choice for use with aggressive solvents, liquids, and gases that can attack other membranes.

Aijiren sterile PES syringe filter
100% integrity test, individual packaging, gamma radiation
Diameter: 13mm, aperture: 0.45um, 100/pack
In line with ISO certification, quality is guaranteed
Applications: Preparation of tissue culture media, sterile filtration and clarification of biological fluids, probe solutions, protein and enzyme filtration, hybridization buffers, etc.

Aijiren Syringe Filters is a comprehensive range of non-sterile disposable syringe filters for reliable sample preparation. Reproducible membrane quality and automated manufacturing processes ensure particulates are removed from each and every sample, extending analytical column lifetime and minimising injection port or valve damage.

Cellulose acetate is a very low protein binding membrane that is ideal for aqueous based samples and biological samples. It is a lower protein binder than either polyethersulphone or PVDF membranes, but has a lower chemical resistance than regenerated cellulose (RC). CA is a strong membrane mechanically and hydrophilic.

The PES film is sealed in the polymer shell without the use of any adhesive. Each unit can provide ETO or Gamma radiation disinfection, and ensure that there is no pyrogen.

Due to the high hydrophobicity of the PVDF membrane, it needs to be immersed in ethanol, methanol or other suitable solutions for activation. This product is only for scientific research by professionals, and must not be used for clinical diagnosis or treatment, or used for food or medicine, and must not be stored in ordinary residences. For your safety and health, please wear lab coats and disposable gloves for operation.

Our expert staff is available via live chat and email to help you decide on the best membrane filter for your needs. Email us, and our helpful customer representatives will respond promptly—in just one business day or sooner. And if you still need help deciding on the right product, we’ll ship you a sample to ensure you receive the best membrane filter for your needs.

PTFE syringe filters are made of Polytetrafluoroethylene (PTFE) membrane and a polypropylene overmold housing.

PES syringe filter has the characteristics of hydrophilicity, low protein binding, high flow rate and good chemical stability. In addition, it also contributes to oxidation stability, high heat and low concentration of extractable elements. Aijiren’s PES syringe filters are ideal for ion chromatography, tissue culture filtration, protein, nucleic acid and high temperature liquid filtration. It helps you get accurate results in sensitive analysis of ionic analytes.

Polyethersulfone (PES): Hydrophilic, stable in low pH, have low levels of extractables, and exhibit low protein binding, making them suitable for many aqueous and organic solvents. PES membranes allow higher liquid flow than PTFE. Temperature resistant. pH range ~3-14 (sometimes quoted as 1-14).

MCE features: relatively uniform pore size, high porosity, no media shedding, thin texture, low resistance, fast filtration rate, and minimal adsorption.
The main purpose of MCE: to filter out the particles and bacteria of liquid medicine, gas, oil, beverages, sprinkles, electronic instruments, etc., and can also be used for the detection of particles and bacteria.

Due to the high hydrophobicity of the PVDF membrane, it needs to be soaked in an appropriate solution such as ethanol before use to achieve the purpose of activation and make the membrane easier to bind proteins. This product is compatible with many dyes, such as Ponceau-S red, Coomassie brilliantblue, Sypro ruby, Transillumination, Toluidine blue, CPTS, Colloidal gold, India inkAmido black. Among them, after dyeing with dyes such as Ponceau and CPTS, the dyes can be washed off and the film can be used for further analysis; while dyes such as Coomassie Brilliant Blue, India ink, and amide black are irreversible, the film cannot be used after dyeing. For further analysis.

The shell of PTFE Syringe Filter is made of polypropylene (PP) with excellent chemical stability. It is made of different colors, which is convenient for users to distinguish products of different materials and avoid confusion. The filter membrane adopts imported high-performance filter membrane with stable product quality and good reproducibility. It is an ideal choice for laboratory filtration of samples. The standard interface is convenient to connect to various syringes, and it can also be directly connected to the needle of the 7725 valve, and the sample can be injected directly after filtration.

Membrane: ?ICP Certified PES (Polyethersulfone)??
Use with: ?Strong bases, alcohols, proteins, peptides
Don¡¯t use with: ?acids, ketones, esters, halogenated or aromatic hydrocarbons.
Sterilization: ?Syringe filters can be sterilized by autoclave at 125¡ã for 15 minutes.
Applications: ?Ion chromatography, tissue culture filtration, filtration of proteins and nucleic acids, high-temperature liquids.

These syringe filters feature a user-friendly design, allowing for convenient and hassle-free filtration. They are compatible with standard luer lock syringes, enabling simple attachment and detachment. The filters come pre-sterilized and individually packaged, ensuring convenience and minimizing the risk of contamination.

Designed to be compatible for the use on all common automated filtration systems, Standard syringe filters are color coded. Aijiren syringe filters are labeled for method validation and certification. All syringe filters are autoclavable (121 ¡ãC and 1.1 bar for 30 min).

13mm, 25mm 0.22um, 0.45um hydrophobic PVDF (polyvinylidene fluoride) membrane syringe filter is a filtration device commonly used in laboratory settings to remove particulates and microorganisms from fluids.
It’s important to note that specific details of hydrophobic PVDF membrane syringe filters, such as pore size, diameter, and filtration capacity, can vary between manufacturers and product lines.
Therefore, it’s recommended to consult the product specifications or contact the supplier for precise information about the syringe filters you are considering for your specific application.

Sample preparation for high-throughput Ultra High Performance Liquid Chromatography (UHPLC)/High Performance Liquid Chromatography (HPLC) analysis can be time consuming when using multiple consumables such as a syringe, syringe filter, sample vial, cap, and septum. Aijiren HPLC filters result in faster sample preparation than the normal syringe filter method.

In order to filter the particles correctly, you need to find the right size filter. You should choose the diameter of the filter carefully. They usually have sizes of 13mm, 25mm and 30mm. Each of these has a different ability to hold particles. According to the sample size, you can choose the appropriate filter diameter. For example, a diameter of 13 mm can be used for 1-10 ml samples. Similarly, 25 mm PVDF syringe filters can be used for sample volumes of 10-100 ml. Their retention is less than 100 ml.