2ml Screw Neck HPLC Vials

Screw-top vials also come in different sizes, with vial caps made of either aluminum for crimp seals or plastic. Amber glass vials are available in 2ml volume with a screw top. Inserts work in conjunction with any autosampler and fit either standard or wide openings vials.

Aijiren’s 9mm hplc vials are very suitable for Autosampler, especially Aijiren’s machines, because Aijiren’s 9mm hplc vials have a long neck to facilitate the grasping of instruments, and the bottom is flat and easy to place in the sampling area, and the accuracy of the thread is guaranteed Improved the sealing performance of 9mm hplc vials. In addition, Aijiren’s Cap and Septa have types that are convenient for Autosampler to puncture. Cap has a center hole, and Septa is very convenient for puncture.

9mm Wide Opening Amber Glass Screw MS Certified Vial Convenience Kits are fully lot-tested by multiple methods for 15 critical parameters. Every pack comes with a Certificate of Conformance. Manufactured from superior quality 33 expansion borosilicate clear (Type 1, Class A) glass, vials are available in assembled and unassembled kits. An assortment of wide opening 9mm vials and a selection of closures are available to suit your application.

The dimensions for 12x32mm vials are standard between manufacturers but the length of the neck and width/shape of the vial shoulder may vary. 12x32mm microvials have the same outer dimensions but the inside of the vial may be tapered to reduce volume or contain a fused insert. 12x32mm high recovery vials will have an internal conical bottom.

The 9mm sample vial has a shortcoming. Because of the short thread and thin gasket, it is easy to pierce and also increases the risk. If it is a pure blunt needle injection, the gasket will penetrate the bottom of the vial, so it is recommended to use a pre-cut or Bonded gaskets and reduce the number of repeated needle insertions to reduce risks.

These vials are the preferred choice for modern autosamplers. With a focus on improved sample security and integrity, we now offer innovative Aijiren 9mm closures and Aijiren 9mm screw top vials for consistent productivity on every separation.

The 9mm screw HPLC autosampler sample vial is made of colorless borosilicate glass or amber 1 B grade borosilicate glass, which is a high-quality raw material. Excellent high temperature and corrosion resistance. Aijiren has strict control over the production environment. Aijiren 9mm screw HPLC autosampler sample vials have won the trust of customers.

9mm screw HPLC autosampler vial can be transparent or amber (mainly used to avoid light) color. The function of the 9mm screw HPLC autosampler vial is manufactured and packaged in an ultra-clean working environment. Certain packaging materials reduce contamination of delivery progress. 9mm screw HPLC autosampler vials can be applied to various types of HPLC and GC equipment especially for Aijiren.

The blue high-quality acrylic vial cap combines innovation with time-saving convenience. The chemically inert vial cap produced by this patented method truly combines the septum and the plastic cap at the molecular level, which can avoid excessive evaporation and keep the sample vial properly sealed. The cap can be used and the septum can be replaced when needed. Choose from a variety of colors of gaskets to meet different needs.

9mm standard 2ml short threaded sample vial(2ml autosampler vial), 2ml, 12×32mm, neck diameter 9mm; red PTFE/white silicone vial gasket, blue perforated polypropylene (PP) vial cap, sample vial has Transparent, amber, transparent with scale writing, and amber with scale writing are available for selection, suitable for various models of autosamplers such as Aijiren, Waters, Varian and Shimadzu.

Amber Borosilicate Glass
ND9mm Screw Neck Vial
11.6*32mm
With Writing Spot
9mm Blue Short Screw PP Cap
with 6mm Centre Hole
Pre-slit / non-slit PTFE Silicone Septa
Septa Size: 9*1mm

9mm Blue Plastic Screw Caps is suitable for: 9mm Short Thread HPLC Vials
Caps Material: polypropylene, size: 11.5*6mm, inner diameter: 9mm, with 6mm Centre Hole or Closed-Top
Color: usually blue, other colors are also provided, such as red, black, yellow, etc
The Septa are PTFE / silicone, size: 9*1mm, the sapta could be pre-slit

Aijiren’s 2ml Glass Vials can be applied in a wide range of fields. Many projects that require chromatographic analysis need to use 2ml Glass Vials, such as environmental analysis, soil analysis, pharmaceutical analysis, food analysis, etc. The aim of Aijiren is to provide high-quality chromatographic consumables for customers of chromatography.

2ml autosampler vials 9mm for HPLC system with bonded septa caps. Including: 100pcs Clear/amber bottles 32×11.6mm made of borosilicate glass, 2ml lab vials 9-425 screw thread, Flat base Sample Vials; Made out of USP TYPE I Glass. With writing patch for pencil mark.

9 mm screw top vial, 32×11.6 mm, clear glass, high recovery, borosilicate glass
1.5ml vial with 30ul reservoir for sample concentration and injection, no transfer to micro insert

9-425 short thread vials with screw caps wholesale, the best supplier in China
Aijiren provides chromatography vials, caps, vial inserts, syringe filters for hplc, glass reagent bottles, etc
Suitable for most autosampler use in the market

Capacity: 1.5/2ml
Temperature: -60—200℃
Material: bottle (domestic borosilicate); gasket (Teflon/silicone); lid (polypropylene)
Color: bottle (transparent/amber), cap (blue)

These vials have an internal tapered bottom which allows the contents to be concentrated at the bottom. Allows more space and larger volumes than concentrating to very small quantities. Ideal for derivatisation or target compounds with very low target concentrations.
Vial Closure Size: 9mm
Vial Volume (Metric) 1.5mL
Volume (Metric) Working 1.3mL
Material: Glass
Color: Amber
Height (Metric) 32mm
Outside Diameter (Metric) 12mm
Residual Volume: <4μL

9mm thread screw neck vial, 32×11.6mm, transparent / amber PP, with graduation line, slightly concave shaped bottom
Preassembled cap and septafor 9mm thread screw PP cap, blue, centrel hole, PTFE/Silicone 9x1mm

Vial Closure Size: 9mm
Vial Volume (Metric) 1.5mL
Volume (Metric) Working 1.3mL
Material: Glass
Color: Amber
Height (Metric) 32mm
Outside Diameter (Metric) 12mm
Residual Volume: <4μL

Aijiren focus on improving the safety and integrity of our samples. Aijiren provide innovative 9mm thread caps and 9mm 2ml Hplc Screw Vials to ensure consistent productivity in all separation processes. These vials are the best choice for the latest autosampler. Standard open screw vials are made of borosilicate glass with a maximum filling volume of 2ml.

The aijiren chromatography sample vial is made of borosilicate glass and meets ASTM TYPE I ClassA and USP TYPE I standards.
There are four types: colorless and amber vial, handwriting area and no handwriting area.

Glass Screw Vials ND9mm for HPLC, Clear & Amber, with /without Patch
High Recovery Glass Screw Vials ND9mm, Clear & Amber, with /without Patch
0.3ml Glass Screw Vial integrated with Micro-insert, Base Bonded, Clear & Amber, with /without Patch
PP Screw Vials ND9mm, Clear & Amber
0.3ml PP short Screw Micro Vials, Clear & Amber

These vials are the preferred choice for modern autosamplers. With a focus on improved sample security and integrity, we now offer innovative 9mm closures and 9mm screw top vials for consistent productivity on every separation.
Standard opening screw-thread vials are manufactured from borosilicate glass and have a maximum fill volume of 2 ml.

Suit for: 9mm Short Thread Vials
Caps Material: polypropylene
Cap Diameter: 9mm
Cap Features: 6mm Centre Hole or Closed Top
Septa Material: PTFE / Silicone
Septa Feature: Pre-slit I or X
Septa diameter: 9mm
Septa Thickness: 1mm

Our 9 mm Wide Mouth Vials and Closures are our recommended screw thread vials. These vials are autosampler compatible and offer a 40% larger opening than 8-425 thread vials, simplifying pipetting and other routine functions. Aijiren Tech offers 9 mm screw thread vials in clear and amber glass, as well as polymeric options and mass spec quality glass.

Product name: 1.5/2ml sample vial plastic PP material

Packing: vial, boxed (100 pcs/box)/caps and septa  bag (100 pcs/pack)
Size: Vial (11.6*32mm) / Gasket (Φ9*1mm)
Material: Vial (PP) / Gasket (Teflon / Silicone) / Cap (Polypropylene)
Gasket performance: acid resistance, alkali resistance, temperature resistance, anti-sticking

Save time in sample preprocessing and reduce the risk of contamination with the Ajiren 9-425 screw sample vial convenience kit. Each kit includes 100 glass sample vials and 100 threaded thread caps with septum. Two reusable compartment trays keep matching supplies together while protecting vials and closures.

Polypropylene Screw Cap with Septa – Polypropylene screw cap with precision-fit septa provide an evaporation-proof seal. Bi-layer include silicone and PTFE. Silicone septa for multiple injections. PTFE-lined screw cap for organic samples. Screw caps provide an inert, airtight seal and direct puncture-access to samples with a syringe needle.

Material: Brosilicate Glass/1st hydrolytic class glass
Volume: 1.5-2.0ml
Dimension: 11.6x32mm
Neck: 9mm Screw neck
Color: Amber and Clear
Septa: Pre-Slit, PTFE/Silicone
OEM & ODM Custom Service