2ml Crimp Glass Vial

Aijiren vials are very suitable for autosamplers and have good chemical compatibility and ultra-cleanliness. The crimping top sample bottle is currently the most commonly used gas sampling bottle on the market because of its very good sealing. The sample bottle with a volume of 2ml is especially suitable for laboratory use. It also has a flat bottom function and is compatible with automatic sampling equipment.

The crimp top provide the tightest seal, reducing the possibility of sample volatilization. The 12X32mm crimp vial and aluminum cap are the most economical choice, and it is also very convenient to use with the crimp tool.

crimp vial is compatible with all 2mL vial autosamplers, 2mL, 11.6x32mm.11X1mm Teflon/silicone septa, 11mm crimp top sample vials and micro-inner tubes, vapor/liquid vials

Suitable for 11mm 2ml Crimp Neck Vials & 20mm Headspace GC Vials
Caps Material: Aluminum
Use Together with PTFE/Silicone Septa or Rubber Stopper
Color: Metal Silver
Vial Septa & Rubber Stopper and Crimpers are also Provided

The 11mm chromatographic vial and the wide-mouth crimp cap provide a larger target area, which can improve the accuracy of the autosampler needle. The crimp vial is made of amber glass to protect light-sensitive samples. Septa types: PTFE/silicone, natural rubber/TEF septa, single slit septa are available.

The crimp type vial, bottom diameter is 11.6mm, the height is 32mm, the neck diameter is 11mm. Actual capacity 2mL, standard capacity 1.5mL

The crimp vial produced by Aijiren has a standard 11.6x32mm shape and is compatible with 11mm aluminum sealing caps. The Aluminum Cap is 11mm in diameter and has a 5.5mm center hole, which is convenient for sampling with automatic injection needles. In addition, the Septa matched with crimp vial can also be pre-slit to facilitate the automatic injection needle to pierce the septa.

2ml / 1.5ml glass crimp vials with crimp seals for hplc autosampler
Crimp the caps to the vials with the hand crimper
100pcs per pack, aluminum caps with ptfe silicone septa, 100pcs per pack

Hplc Vials Septum
Red PTFE White Silicone Septum
Septum Size: 11*1mm

2ml clear crimp top hplc autosampler vial is made of borosilicate glass. Comparing with 2ml amber crimp headspace vial, the 2ml clear crimp top hplc autosampler vial should be made by special process. The appearance of a clear and transparent 2ml crimp top sample hplc vial has attracted widespread attention. 2ml clear crimp top hplc autosampler vial is made by adding UV-absorbed metal oxides to the glass, while using the complementary effect of color, and then adding certain metals or their oxides to fade the colored glass. So in theory, the 2ml clear crimp top HPLC autosampler vial is a little expensive than Amber autosampler vial.

Aijiren sample vials have excellent sealing performance, which can effectively avoid sample evaporation. The sample bottle and corresponding 11 mm aluminum cap can be easily combined with the crimp cap tool. The vial can withstand heat and pressure, and can also be used for chemical reactions. Especially for sample vials with white open caps and thick PTFE/silicone septa, they can be used as anhydrous and oxygen-free reaction vials.

The strict quality assurance of Crimp Top HPLC Vial produced by Aijiren provides dimensional consistency between batches, and the optional ceramic writing point with filling marks on the vial is certified and fully compatible with the autosampler. At the same time, Aijiren Good quality control has been achieved, including height, diameter, bottom, thickness and neck/thread, cleanliness.

2ml crimp autosampler vial is depending on the filling volume. We differentiate between standard 2ml crimp autosampler vials and micro-vials which either have an interior or exterior volume reducing shape. Alternatively you can of course also use inserts to reduce the volume inside a vial, in order to create ideal conditions for sample removal. 2ml crimp autosampler vial with insert is larger and wider mouth than 9mm screw sample vial. 2ml crimp autosampler vials have approximately a 40% wider mouth opening than standard opening vials. The large opening reduces the risk of bent autosampler needles during sampling.

The 11mm Crimp Neck Vials is made of amber borosilicate hydrochloric acid glass, and the area with a writing scale is convenient for customers to identify the sample. The scale expresses the current level of the sample. Although the maximum capacity of 11mm Crimp Neck Vials is 2ml, Aijiren recommends that customers hold 1.5ml of liquid to maintain the level of the liquid and balance the internal pressure of Vials.

As HPLC autosampler vial manufacturer, Aijiren supply 2ml clear crimp top hplc autosampelr vial in wholesale price. The price of 2ml clear crimp top hplc autosampler vial is the same to Amber autosampler vial. Before you buy it, Aijiren can supply free sample to test. Aijirne is a global supplier of analytical field and lab supplies with high quality, good service and favorable price. About 2ml clear crimp top hplc autosampler vail and septa , cap, you can ask Aijiren business manager. Welcome to inquiry.