2ml 8mm Autosampler Vials for HPLC

Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage. One piece polypropylene cap and membrane are also available. These pierceable screw thread caps are designed for one time use and reduce sample preparation time as there is no cap and seal to assemble.

We provide septa and caps to fit our autosampler crimping the top vial to provide PTFE protection and silicone resealability. The cap includes a double-sided PTFE septum with silicone in the middle.

Aijiren has been producing 2ml glass autosampler vial since 2009. The glass vials we produce are widely used all over the world. For more than ten years, our customers are in more than 70 countries and regions. Our 2mlvial is also well received by customers. Aijiren’s customer service and product quality are among the best in laboratory consumables.

2ml Autosampler Vials 8-425 neck finish represents a hplc vials &gc vials, the vials a diameter of 8 mm across the outside of the threads and a thread style of 425, Vials has clear and amber, Screw Cap in Lab most of the 2ml vials are 12*32mm. The design of Aijiren screw thread top vials is developed from Europe and the United States, and the design feature is easy to use, especially the use of an automated sample introduction system. 

8-425 thread caps and viars are often used in combination with Shimadzu, Specra-Physics, Varian, and other autosamplers
The vial is made of transparent type 1 class A or amber, type 1 class B borosicate glass and contains writing patches for sample identification.

The screw top vial design is characterized by general ease of use, especially with autosampling systems, hence the name autosampler vial. The 1.5 ml vials are commonly referred to as 2 ml capacity vials.

Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage. One piece polypropylene cap and membrane are also available. These pierceable screw thread caps are designed for one time use and reduce sample preparation time as there is no cap and seal to assemble.

Aijiren screw thread top sample vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called an autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial. The

Welcome to buy Aijiren 8-425 2ml hplc vial with cap. Aijiren has a large output and can quickly complete the mass production of 2ml hplc vial with cap after you place an order. Aijiren has long-term cooperation with freight forwarders to ensure that you get the goods as soon as possible. To purchase 2ml hplc vial with cap, please choose Aijiren.

Screw cap vials are available with either an open hole for autosampler use and standard addition or a solid top for sample storage. One-piece polypropylene caps and membranes are also available. These pierceable screw caps are designed for single use and reduce sample preparation time by eliminating the need to assemble the cap and liner.

8-425 2ml Autosampler Vials from Aijiren is 12*32mm,It is 40% wider than the ordinary vial opening, thus ensuring that the syringe of the autosampler can pierce the bottle smoothly without errors. 8-425 2ml autosampler vials neck Suitable for Shimadzu autosampler and other rotating or robotic arm samplers.

If the reagent to be tested by the customer is very precious and the capacity of 2ml vial is too large, Aijiren 8-425 2ml Autosampler Vials can be used with different types of micro-insert. There are 3 types of micro-insert, 29*5mm 150uL micro-insert with mandrel interior&polymer feet, 150uL conical bottom micro-insert and 250uL flat bottom micro-insert. All three types of micro-insert can be adapted to 8-425 2ml Autosampler Vials.

Material: Borosilicate glass
Finish Type: Screw Neck
Color: Clear / amber
Size: 11.6*32mm
Cap: Black Polypropylene Cap
Closed-top or with 5.5mm center hole
PTFE/silicone Septa
with pre-slit

2ml Autosampler Vials 8-425 Neck surface finish is representative of hplc vials &GC vials, vials have a screwed outer diameter of 8 mm, thread style 425, vials are available in clear and amber, threaded caps in Lab most 2ml vials are 11.6x32mm

Caps are made of high-quality polypropylene to meet accurate manufacturing tolerances and backed in a managed manufacturing environment. The color of the cap is only black. The septum uses only the highest quality materials to ensure proper function and can be easily penetrated by pre-slits.

The Screw Cap and Septa for 1.5ml HPLC Autosampler Vial are essential components for secure sealing and sample integrity in HPLC analysis. The screw cap ensures a tight and leak-proof closure, preventing any contamination or loss of samples. The septa, made of high-quality materials, provides excellent chemical resistance and ensures a reliable seal.

2mL amber glass screw top autosempla vials are available in a variety of neck finishes and opening diameters. Large mouth or wide ID viale has an opening about 40% wider than the standard opening vial. Large openings reduce the risk of the autosampler needle bending during sampling. When selecting a 2mL amber glass screw top autosan pravisal, the material of the product is the most important.

Let me introduce the material of 8-425 2ml autosampler vials, 33 Expansion borosilicate glass USP Type I Class A made of clear vial, or 51 Expansion borosilicate glass USP Type I, Class B made of Amber vial.Our glass uses neutral borosilicate and low borosilicate, but our neutral borosilicate can reach the standard of high borosilicate, and our low borosilicate can reach the standard of neutral borosilicate. We use excellent raw materials to make 8-425 2ml autosampler vials.

Autosampler vials are available in a variety of sizes, with 2 mL vials being the most common size. During the injection process, the autosampler needle pierces the cap and extracts the desired amount of analyte from the vial. There are different types of vials for chromatography applications.

These vials are made of high-quality materials, such as borosilicate glass, providing excellent chemical resistance and sample stability. The clear glass construction allows for easy visibility and inspection of the sample, while the 8-425 thread ensures convenient sealing and unsealing of the vial during sample preparation and analysis.

Standard GC, HPLC sample vial, small caliber, 8-425 standard threaded mouth, can be used for autosampler and sample storage. It can be used with 8-425 screw cap septum.
8-425 Autosampler Vial, often used in conjunction with Shimadzu, Spectrophysics, Varian, and other autosamplers. The vial is made of colorless Class 1 Type A or Amber Class 1 Type B borosilicate glass , And attached with a writable label for sample identification.
The vial cap is made of high-quality polypropylene, with precise manufacturing tolerances and a controllable manufacturing environment. The gasket is made of the highest quality PTFE/silicone to ensure the high efficiency of the function.

Aijiren’s HPLC Vial is divided into two types: clear glass and amber glass. The clarity of clear glass is more obvious. The reagent changes in the vial can be clearly seen. The amber glass can protect the sample in the vial from deterioration due to ultraviolet radiation.

Constructed from high-quality borosilicate glass, these autosampler vials offer exceptional chemical resistance and thermal stability. The 8-425 thread finish allows for easy and efficient sealing, ensuring hassle-free sample preparation.