2ml 4ml Chromatography autosampler vials for Sale

The 4ml screw neck glass vial produced by Aijiren is often used in Autosampler. The 4ml 13mm opening is convenient for automatic injection needle injection. The Cap has a center hole. PTFE and Silicone are compounded on both sides to ensure that one side of PTFE faces the reagent inside Vias, ensuring that the stability of the reagent is not destroyed.

Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage. One piece polypropylene cap and membrane are also available. These pierceable screw thread caps are designed for one time use and reduce sample preparation time as there is no cap and seal to assemble.

Suitable for 11mm 2ml Crimp Neck Vials & 20mm Headspace GC Vials
Caps Material: Aluminum
Use Together with PTFE/Silicone Septa or Rubber Stopper
Color: Metal Silver
Vial Septa & Rubber Stopper and Crimpers are also Provided

2mL Amber Glass Screw Top Autosampler Vials are available in a variety of neck finishes and opening diameters. Large mouth or wide ID vials have approximately a 40% wider mouth opening than standard opening vials.

Aijiren began to produce Autosampler Vial 20 years ago, which is often used in chromatographic analysis experiments. Aijiren uses machinery for mass production, which ensures the mass production of products. 100 pcs/pack is convenient for customers to use. The design of separate packaging for Vial and Cap. It is convenient for customers to seal after holding Autosampler Vial.

1. The glass adopts high-quality borosilicate glass tube, with low free ion content, low expansion coefficient and very high chemical resistance.
2. The unique thread design can ensure the consistency of the seal.
3. Strict quality assurance provides dimensional consistency between batches.
4. It is suitable for autosampler of Aijiren, Shimadzu, Waters, CTC/Leap and other companies.

One piece polypropylene cap and membrane are also available. These pierceable screw thread caps are designed for one time use and reduce sample preparation time as there is no cap and seal to assemble.

The snap-on seal bottle produced by Aijiren is not easy to break during the opening process because more glass is used in the neck of the bottle. The snap-on seal neck is compatible with crimping and/or snap-on seals, and the cover can be removed without any special tools. It is recommended to use these vials for short-term sample storage and non-volatile samples, as their tightness is not as good as crimping or thread sealing.

Material: Brosilicate Glass/1st hydrolytic class glass
Volume: 1.5-2.0ml
Dimension: 11.6x32mm
Neck: 9mm Screw neck
Color: Amber and Clear
Septa: Pre-Slit, PTFE/Silicone
OEM & ODM Custom Service

Although most laboratories have switched to 9 mm screw thread vials for a wider opening while still being autosampler compatible, some labs use 8-425 vials for storing solvents. The standard opening 8-425 vials have more threads per inch, so there is less likelihood that volatile solvents will evaporate over time.

Suit for: 9mm Short Thread Vials
Caps Material: polypropylene
Cap Diameter: 9mm
Cap Features: 6mm Centre Hole or Closed Top
Septa Material: PTFE / Silicone
Septa Feature: Pre-slit I or X
Septa diameter: 9mm
Septa Thickness: 1mm

Aijiren’s HPLC Vial is divided into two types: clear glass and amber glass. The clarity of clear glass is more obvious. The reagent changes in the vial can be clearly seen. The amber glass can protect the sample in the vial from deterioration due to ultraviolet radiation.

The automatic vial is made of high quality raw materials. It has high temperature resistance and corrosion resistance. The septum of the autosample vials is made of high quality materials to ensure proper functioning and is widely used in multiple injection or longer injection cycle designs as well as gas and liquid chromatographs.

The crimp top provide the tightest seal, reducing the possibility of sample volatilization. The 12X32mm crimp vial and aluminum cap are the most economical choice, and it is also very convenient to use with the crimp tool.

The large opening reduces the risk of bent autosampler needles during sampling. When choosing a 2mL Glass Screw Top Autosampler Vials, the product material is of paramount importance.

Polypropylene Screw Micro Vials can be used in most standard gas and liquid chromatography autosamplers. These lightweight, economical vials are made of durable polypropylene with good chemical resistance. The conical interior ensures maximum recovery of contents without the hassle of removable inserts.

Aijiren 13-425 glass vials with screw cap are customized products based on your experimental requirements for vial types, writing areas, logos and other individual parameters. Aijiren 13-425 glass vials with screw cap is fully compatible with SHIMADZU autosamplers. Compared to crimp top vials, 13-425 glass vial with screw cap can easily tighten the lid without the help of a tool. Polypropylene threaded cap with PTFE septa, can form a good seal on the vial, improve work efficiency.

1. Septa and slit septa are available.
2. Normal Available cap color is Black, other special colors can be also produced.
3. Pre-assembled caps and septa are convenient and minimize contamination from handling.
4. Phenolic caps can be autoclaved.

The steep conical High recovery interior bottom provides exceptional downward drainage while allowing maximum retrieval of contents by syringe. High recovery Vials are perfect for specialty pharma, biotech, pharmaceutical and diagnostics packaging applications.

PTFE-lined screw cap for organic samples. Screw caps provide an inert, airtight seal and direct puncture-access to samples with a syringe needle.

Glass Screw Vials ND9mm for HPLC, Clear & Amber, with /without Patch
High Recovery Glass Screw Vials ND9mm, Clear & Amber, with /without Patch
0.3ml Glass Screw Vial integrated with Micro-insert, Base Bonded, Clear & Amber, with /without Patch
PP Screw Vials ND9mm, Clear & Amber
0.3ml PP short Screw Micro Vials, Clear & Amber

PTFE is the most inert, but it has poor resealability, so it is not suitable for multiple injections or storage. For layered septa (such as PTFE/silicone), the chemical resistance of the septum is PTFE until the septum is punctured.