25mm PTFE Syringe Filter

In order to produce 9mm closures, Aijiren purchased brand new automatic production equipment, such as septa production machines and Cap production machines, and Aijiren can also automate the assembly of Cap and Septa, and realize the pre-cutting machines for Septa, all of which are available in the Aijiren factory of.

PVDF Syringe filter has many advantages. PVDF film has high mechanical strength, is not easy to break or curl; it has the advantages of low background, wide solvent compatibility, and excellent coloring ability; in addition, PVDF film can be tested repeatedly after proper treatment. The pore size of PVDF membrane is 0.22¦Ìm and 0.45¦Ìm. 0.22¦Ìm is suitable for proteins with molecular weight less than 20kDa, which can effectively reduce the leakage of small molecular weight proteins. Compared with 0.45¦Ìm PVDF membrane, it has higher protein adsorption rate and protein sequencing yield. For example, the adsorption capacity of insulin and BSA are 1.64 times and 1.58 times that of the commonly used 0.45¦Ìm PVDF membrane, respectively.

Aijiren’s PTFE syringe filter housing is made of high-quality polypropylene (PP) with high mechanical strength and good chemical compatibility. The filter membrane is made of hydrophobic polytetrafluoroethylene (PTFE). No binders or additives are used, and there is little interference with the analysis. Teflon syringe filters are widely used in laboratories. It does not require membrane replacement and filter cleaning, eliminating complicated and time-consuming preparations. PTFE Syringe Filter is mainly used for sample pre-filtration, clarification and removal of particulate matter, and sterilization and filtration of liquids and gases. HPLC and GC are the preferred methods for small samples.

Aijiren¡¯s syringe filter has many different types of membranes. Aijiren can also sell membranes separately. Different reagents need to choose membranes of different materials to avoid the reaction between the membrane and the reagents and affect the experimental results. Aijiren usually recommends customers to choose PTFE, because PTFE is extremely inert and suitable for most reagents.

The septa produced by Aijiren uses high-quality raw materials. The raw materials are softened and heated into a mold into a shape with the same size and size. Then, a unique process is used to combine Silicone and PTFE, and finally cut and cut into a size suitable for Vial. . Aijiren, as a rubber factory, has enough experience and strength for Septa’s quality assurance.

Aijiren 18mm magnetic screw cap (silver) and silicone/PTFE septa. Cap: The magnetic 18 mm screw cap can be effectively tested on the gas chromatograph autosampler, and the standard aperture of the center hole ensures the effective injection of the autosampler. Septa uses inert PTFE and Silicone bonding, or PTFE and Butyl bonding, these can be provided to customers to choose.

Aijiren recommends that each syringe filter be used only about 10 times. If there are too many impurities in the reagent, the pore size of the syringe filter will be blocked and the filtration task cannot be completed. The Syringe filter provided by Aijiren has a favorable price and good quality. It is very suitable to change to a new Syringe filter to continue filtering after using it several times.

Aijiren is a professional supplier of chromatography consumables. Aijiren not only provides 20mm Crimp Top Closures, but also provides matching Headspace Vial, Hand Crimper and Decrimper. The 20mm Crimp Top Closures has a strong sealing performance, and the combination of rubber and PTFE makes Closures have better sealing performance and is very convenient for automatic injection needle puncture. Aijiren has 20 years of experience in producing gas chromatography consumables. The high-quality products and strict review system have made Aijiren successful until now.

Aijiren is a professional manufacturer specializing in the production of Autosampler Vials, Headspace Vials, Reagent Bottle, Syringe Fiter, etc. The production method adopted by Aijiren is fully automated mechanical production, which ensures that every vias undergoes strict inspection and conforms to ISO standard. The picture shows the packaging workshop of Aijiren. The produced Vias will be packed in boxes and waiting for shipment in the packaging workshop.

Aijiren’s butyl and PTFE composite Septa is often used in 20mm Aluminum Crimp Cap. This combination of Closures is suitable for 20mm crimp headspace vials. The 3mm thickness of Septa is convenient for sealing and will not be damaged by puncture. The sampling head. As a factory direct sale, Aijiren saves you the accumulated sales cost of middle-level distributors. The price is more competitive and its own technical advantages provide reliable quality assurance for each batch of products shipped out of the factory, so that customers can use it more assured.

18mm Screw Neck Closures 18mm screw neck vials with magnetic screw seals for CTC is a new product in the headspace market where the jaws dominate. Especially for magnetic caps that are difficult to crimp, screw caps are a convenient alternative. 18mm Screw Neck Closures with Vial are preferentially used in instruments: CTC PAL, Varian, Gerstel, Atas, Shimadzu, Aijiren.

Aijiren’s syringe filter with nylon membrane is compatible with a variety of solvents and is very suitable for rapid filtration of most aqueous and organic solutions. Therefore, when the mixture of the sample aqueous solution and the organic solvent passes through the membrane, the fine droplets of the extraction solvent gather and separate from the sample aqueous solution. The nilong syringe filter produced by Aijiren is environmentally friendly and has no centrifugal effect. By filtering the receptor phase, it can provide a higher sample purification rate.

In addition, the material of Butyl determines that Septa is not easy to deform, even if it is used for a long time, it is stretched. Aijiren uses high-quality raw materials, which ensures that Butyl Septa will not break and contaminate the sample when it is penetrated by the automatic injection needle in time.

Aijiren has produced 24mm Screw Neck Closures for more than 20 years. From Cap processing to Septa production, all are produced by fully automated machinery. Aijiren promises to use dust-free workshops to produce Screw Closures to ensure the cleanliness and high quality of the products.

During Aijiren’s production process, more production is used as a backup. Autosampler Vial with part of the margin is packaged in a carton for packaging. Aijiren’s factory can provide Autosampler Vial, Headspace Vial, COD Test Tube, Syirnge Filter and other different products. Production, so Aijiren has great advantages in exporting products. These advantages have created Aijiren and made Aijiren a well-known supplier of chromatography consumables in China.

Aijiren’s Septa made of high-quality raw materials can protect the seal inside the Vial to a certain extent, and will not break or fall off the cap after the automatic injection needle is punctured. This is to a large extent. Gas chromatography experiments provide convenience, and bring safe and accurate results.

The Crimp Closures produced by Aijiren are made of aluminum. This metal Cap is very strong and will not leak air after the Hand Crimper is sealed. Aijiren uses plastic sealed bags to pack 100pcs/pack. If customers need, Aijiren also provides plastic cans. This kind of packaging can reduce squeezing and ensure that each closure is complete.

The 18mm magnetic screw cap is easy to use and does not require any additional tools, such as a capper and an opener. Samples can be transferred on site, no need to transfer samples in the laboratory. The precision thread ensures the air tightness between the Headspace Vial and the 18mm magnetic screw cap. Magnetic nut can be widely used in various SPME and headspace analysis.

Aijiren’s Closures are usually 100pcs as a pack, and the matching Headspace Vial is also 100pcs as a box. This kind of packaging is convenient for customers to use. Aijiren can provide a set of Via and Closures purchased together, and it also supports the purchase of Closures separately.

Crimp Neck Closures produced by Aijiren are often used in Crimp top Headspace Vial. The production of Crimp Neck Closures is fully automated. As a factory with 20 years of production experience, Aijiren can meet the quality of Crimp Neck Closures and become a well-known manufacturer of chromatographic consumables in China.

The blue high-quality PP bottle cap of 9mm Screw Neck Closures will be combined with Septa. Aijiren has a unique patented method to combine Silicone and PTFE. Septa produced by this patented method is combined with a chemically inert Cap to avoid excessive evaporation and keep the sample bottle well sealed. It is recommended for short-term storage or liquid chromatography. Aijiren produces a variety of colors of 9mm Screw Neck Closures to choose from to meet different needs.

Aijiren’s 20mm headspace vial is a popular product of Aijiren, and its corresponding Aluminum Cap with PTFE/Silicone Septa is also a popular product of Aijiren. It is precisely because of Aijiren’s excellent quality and favorable price that Aijiren has become the most well-known chromatography in China. One of the manufacturers of consumables.

Aijiren syringe filter features: The syringe filter housing is made of high-quality sanitary polypropylene material (PP). The precise structure ensures smooth filtration, reasonable internal space, and extremely low residual rate. Can withstand pressure up to 7bar. The needle filter has a thread on the edge and has a non-slip function, which is very popular among users. Our membrane comes from a well-known filtration membrane company in China, which guarantees the stable quality and high precision of the membrane pores, and provides maximum protection for your instrument and gas chromatography column. The quality of the filter membrane is stable, and there is no difference between each product, ensuring the consistency of your test results.

And the nylon membrane syringe filter produced by Aijiren can be used for alkaline blotting and fixation. If fixing methods such as baking and ultraviolet light are used, higher nucleic acid detection sensitivity can be obtained. Since the nylon membrane is a hydrophilic membrane, it does not need to be immersed in a solution such as ethanol or methanol for activation. The nylon syringe filter produced by Aijiren is only for professionals to use for scientific research, not for food.

PTFE disposable syringe filter is a fast, convenient and reliable filter tool, often used in laboratories. It has the characteristics of beautiful appearance, light weight and high cleanliness. Because there is no need to replace the filter membrane and clean the filter, it saves tedious and time-consuming preparation work. It is widely used in laboratories, widely used for sample pre-filtration, clarification and removal of particulate matter, and sterilization and filtration of liquids and gases.

Aijiren has been engaged in the production of chromatographic consumables for 20 years. The types of products produced by Aijiren include Autosampler Vial, Syringe Filter, COD Test Tube, Headspace Vial, Reagent Bottle, etc. These products need to be packaged and shipped after Aijiren is produced. This uses the packaging workshop in the picture.

Aijiren finds the right size filter in order to ensure that customers can filter the particles correctly. It is recommended that you choose the diameter of the filter carefully. Aijiren produces usually sizes of 13 mm and 25 mm. Each of them has a different ability to hold particles. According to the sample size, the appropriate filter diameter can be selected. For example, a diameter of 13 mm can be used for samples of 1-10 ml. Similarly, 25 mm PVDF syringe filters can be used for sample volumes of 10-100 ml. Their retention is less than 100 ml.

There are two types of packaging for 20mm Crimp Top Closures produced by Aijiren, one is packaged in plastic bags, the other is packaged in threaded plastic cans, and the quantity is 100 per bag/can. Aijiren is packaged in cans. Because 20mm Crimp Top Closures are easily squeezed and deformed during transportation, which affects the sealing effect in the experiment, they are packed in cans.

The standard sample vials for GC and HPLC have a 9mm opening to facilitate sample storage. It can be used with 9mm Closures. There are different colors of open cover, solid cover and a variety of septa suitable for different applications for customers to choose. Aijiren produces Closures in a clean room. It is Aijiren’s efforts to ensure the high quality of 9mm Closures and 9mm hplc vial.