25mm MCE Syringe Filter

In HPLC analysis, the particle size of the chromatographic column packing is small and easily blocked by contaminant particles. t. In HPLC analysis and IC analysis, syringe filters can be used to filter sample solutions, which is an important step in sample pretreatment.

PTFE (polytetrafluoroethylene) performance: suitable for water system and various organic solvents, resistant to all solvents, low solubility. It has the characteristics of air permeability and water impermeability, large air flux, high particle retention rate, good temperature resistance, resistance to strong acids, alkalis, organic solvents and oxidants, resistance to aging, non-stickiness, non-flammability, non-toxicity, and biocompatibility. Its related products are widely used in chemical, pharmaceutical, environmental protection, electronics, food, energy and other fields

This nylon membrane can be used for alkaline blotting and fixation, but if fixing methods such as baking and ultraviolet rays are used, higher nucleic acid detection sensitivity can be obtained. Since the nylon membrane is a hydrophilic membrane, it does not need to be immersed in ethanol, methanol and other solutions for activation. This product is only for scientific research by professionals, and must not be used for clinical diagnosis or treatment, or used for food or medicine, and must not be stored in ordinary residences. For your safety and health, please wear lab coats and disposable gloves for operation.

Syringe Filters with hydrophobic PTFE membranes can be used for filtration of strong solvents, acids and alkalis. Not suitable for filtration of aqueous liquids. Filters with hydrophilic PTFE can be used for filtration of strong solvents, acids and alkalis. However, these syringe filters can also be used for the filtration of aqueous liquids, which makes this type very versatile.

Adding a syringe filtration step before the sample injection not only helps to ensure more consistent and reliable results. It also helps protect delicate instruments and extend column life.

Polyethersulfone (PES):?Hydrophilic, stable in low pH, have low levels of extractables, and exhibit low protein binding, making them suitable for many aqueous and organic solvents. PES membranes allow higher liquid flow than PTFE. Temperature resistant. pH range ~3-14 (sometimes quoted as 1-14).

Aijiren PP syringe filter
Product Model: 25mm,0.22um Sterilization Independent Packaging
Application: sterilize and filter the aqueous solution
Operating temperature: 45¡ãC
Inlet pressure: bar (psi): 5.2 (75)
Wettability: hydrophilic
Filter membrane diameter: 25mm
Membrane aperture: 0.22um

Aijiren Tech’s syringe filters are a complete range of non-sterile disposable syringe filters for reliable sample preparation. Repeatable membrane quality and automated production processes ensure that particles are removed from each sample, extend the service life of the analytical column, and minimize damage to the inlet or valve.

PVDF syringe filters are made of hydrophilic PVDF membrane and a polypropylene overmold housing. Available in 13 mm and 25 mm diameters and 0.22 μm and 0.45 μm pore sizes.

The Syringe Filters are suitable for a wide range of applications in pharmaceutical, biotechnology, environmental, and research laboratories. From sterilizing and clarifying liquids to removing particulates prior to analysis, these filters are versatile tools that can enhance the quality

In chromatographic experiments, the sample is placed on the chromatographic column for analysis after the sampler is injected. However, the inner core of the sampler and the chromatographic column is relatively thin. If there are large particles in the sample, it may cause the device to block , Need to use Syringe Filter for preliminary sample filtration treatment.

Our syringe filters are made from high-purity polytetrafluoroethylene (PTFE) membrane for superior performance and durability. PTFE is an ideal material for HPLC applications with excellent chemical compatibility, low protein binding, and minimal analyte adsorption. This ensures sample integrity for accurate, reproducible results.

PVDF syringe filters have excellent chemical compatibility, mechanical strength and low extractability. In these filters, the maximum allowable housing pressure is 150 psi. It improves the filtering speed. These filters have high temperature resistance due to their materials. They have excellent flow rate and temperature stability.

MCE Syringe Filter is generally used to filter neutral or partial neutral aqueous solutions, and can be used as experimental sample clarification filtration, liquid chromatography injection filtration and so on. Not suitable for filtering organic solvents and strong acid and alkali solutions. This filter is for one-time use, filtering about 10 ml at a time (specifically, there is a big difference according to the impurities of the filtered liquid), and the filter membrane cannot be disassembled. 0.45¦Ìm can remove conventional impurities and some bacteria visible to the naked eye. Generally used in conjunction with the syringe.

A syringe filter is a quick, convenient and reliable filter tool used routinely in the laboratory. Because they don’t need to change the membrane and filter cleaning, it’s eliminating the complex and time-consuming preparation.  

The shell of PTFE Syringe Filter is made of polypropylene (PP) with excellent chemical stability. It is made of different colors, which is convenient for users to distinguish products of different materials and avoid confusion. The filter membrane adopts imported high-performance filter membrane with stable product quality and good reproducibility. It is an ideal choice for laboratory filtration of samples. The standard interface is convenient to connect to various syringes, and it can also be directly connected to the needle of the 7725 valve, and the sample can be injected directly after filtration.

13mm, 25mm 0.22um, 0.45um hydrophobic PVDF (polyvinylidene fluoride) membrane syringe filter is a filtration device commonly used in laboratory settings to remove particulates and microorganisms from fluids.
It’s important to note that specific details of hydrophobic PVDF membrane syringe filters, such as pore size, diameter, and filtration capacity, can vary between manufacturers and product lines.
Therefore, it’s recommended to consult the product specifications or contact the supplier for precise information about the syringe filters you are considering for your specific application.

Our expert staff is available via live chat and email to help you decide on the best membrane filter for your needs. Email us, and our helpful customer representatives will respond promptly—in just one business day or sooner. And if you still need help deciding on the right product, we’ll ship you a sample to ensure you receive the best membrane filter for your needs.

Aijiren’s PVDF membrane (imported packaging, 6.6¡Á8.5cm, 0.2¦Ìm) is a pre-cut polyvinylidene fluoride (PVDF) imprinting membrane with a size of 6.6¡Á8.5cm and a pore size of 0.2¦Ìm. It is most commonly used for the transfer of protein from gel to membrane in immunoblot (Western blot), and can also be used for adsorption analysis, amino acid analysis, N-terminal protein sequencing, dot and slot blot detection, Glycoprotein color development and lipopolysaccharide analysis, etc.

PTFE Syringe Filters are universal filters that are inert to a wide variety of aggressive solvents and strong acids and bases. These syringe filters can also be exposed to high temperatures and are an excellent choice for HPLC sample preparation. We offer PTFE syringe filters in both their hydrophobic and hydrophilic states.

Membrane materials are supplied under the industry’s best names, and ISO9000 certified manufacturing uses the latest manufacturing technology to ensure high quality and consistent products, performed to the highest standards in certified cleanroom conditions. All syringe filters are HPLC certified.

Syringe filters are a fast, convenient and reliable filter tool that is routinely used in laboratories. No need to replace membranes or clean filters, which eliminates the need for complex and time-consuming preparations. Widely used in pre-sample filtration, particle removal, and aseptic filtration of liquids and gases. This method is suitable for rinsing small samples before loading into HPLC and GC, and is often used in disposable syringes.

Aijiren syringe filter is a fast, convenient and reliable filter tool, usually used in the laboratory. Since they do not require membrane replacement and filter cleaning, complicated and time-consuming preparations are eliminated. It is widely used for sample prefiltration, particle removal, aseptic filtration of liquids and gases.

Product applications: water purification, HPLC sample preparation, mobile phase solution filtration, cell culture, microbial filtration or sampling, protein precipitate removal, particle removal and monitoring, QC analysis, content consistency, dissolution testing, environmental sampling, food analysis. Generally speaking, 0.45 ¦Ìm pore size is suitable for removing particles from samples or the mobile phase solution of chromatography equipment, and 0.22 ¦Ìm is suitable for filtering microorganisms.

 In HPLC analysis and IC analysis, syringe filters can be used to filter sample solutions, which is an important step in sample pretreatment.