25mm HPLC Syringe Filter for Wholesale

A syringe filter (sometimes called a wheel filter for its wheel-like shape) is a single-use membrane based filter cartridge, to be attached with a syringe to remove impurities in liquid solutions. This pre-filtration step is vital in preventing damage to instruments (e.g. liquid chromatography, ICP, etc.).

Aijiren¡¯s PP syringe filter uses a hydrophobic polypropylene membrane, which has stable physical and chemical properties, good compatibility, low protein adsorption, and is suitable for filtration of aqueous solutions and most solvents. Commonly used to filter biological samples, solvents, deionized water and reduce biological load, the hydrophobic PP filter membrane is particularly good for gas filtration. The product was sterilized by dry heat at 121¡ãC for 15 minutes.

PP housing membrane syringe filter refers to a syringe filter wif a housing made of polypropylene (PP).

Polypropylene is a commonly used material for syringe filter housings due to its chemical compatibility, low extractables, and resistance to a wide range of solvents. PP housings provide structural support to teh filter membrane and help maintain its integrity during filtration.
These syringe filters find applications in various fields such as pharmaceuticals, biotechnology, environmental analysis, food and beverage testing, and research laboratories where precise filtration is required to ensure sample purity and integrity.

In HPLC analysis, the particle size of the chromatographic column packing is small and easily blocked by contaminant particles. Therefore, samples and solvents must be pre-filtered to remove particulate contaminants and protect the instrument.

Filter sterilization, that is, removing microorganisms by physical means such as screening or filter material adsorption, is a commonly used method of sterilization. The filtration method is widely used, and some materials that need to be sterilized cannot be heated, such as many vitamin solutions. In addition to being used in the production of beverages and drugs, the air is often sterilized by filtration. When we usually do microbiology experiments, the sterilized container is usually plugged with cotton at the outlet, which is actually filtering to remove microorganisms in the air, so that there is no microbial contamination in the air entering the container.

syringe filter is a small, disposable filter device that is commonly used in laboratory settings for the filtration of liquids. It is designed to be attached to a syringe, allowing the liquid to be passed through the filter membrane under pressure.
syringe filter is a small, disposable filter device that is commonly used in laboratory settings for the filtration of liquids. It is designed to be attached to a syringe, allowing the liquid to be passed through the filter membrane under pressure.

A syringe filter (or wheel filter) is a single-use, membrane-based device used for the removal of particulate impurities from small (≤ 100 mL) liquid samples. Selected based upon the desired end application, disposable syringe filters are commonly used in labs for fast and efficient filtering, material purification, or even sterilization.

Uniform aperture,Thin texture,Low flow resistance,High filtration speed,Little absorption,All items are quality tests for filter efficacy and housing integrity. The housing is pressure tested for use with up 75 psig (5.0 bar) of pressure.

Aijiren’s PVDF syringe filters are hydrophilic in nature and have strong chemical compatibility. They can bring precision to your research and ensure the highest level of performance. Our filter range is designed with female leur-Lock imports and male Leur-slip exports. In addition, these filters have better mechanical resistance and it can withstand high temperatures.

Syringe filter is a quick, convenient and reliable filter tool used routinely in the laboratory.Because they don’t need to change the membrane and filter cleaning, it’s eliminating the complex and time-consuming preparation. It is widely used in the sample pre filtration, removal of particles, aseptic filtration of liquids and gases. It is the preferred method to filter small samples before loading into HPLC and GC ,and it is often used with disposable syringe.

Aijiren’s PVDF membrane (imported packaging, 6.6¡Á8.5cm, 0.2¦Ìm) is a pre-cut polyvinylidene fluoride (PVDF) imprinting membrane with a size of 6.6¡Á8.5cm and a pore size of 0.2¦Ìm. It is most commonly used for the transfer of protein from gel to membrane in immunoblot (Western blot), and can also be used for adsorption analysis, amino acid analysis, N-terminal protein sequencing, dot and slot blot detection, Glycoprotein color development and lipopolysaccharide analysis, etc.

In HPLC analysis, the particle size of the chromatographic column packing is small and easily blocked by contaminant particles. Therefore, samples and solvents must be pre-filtered to remove particulate contaminants and protect the instrument.

You can choose a PTFE needle-punched filter to improve the filtration efficiency in any area. They provide high-performance filtration through an application-centric design and can be used in various industries that process organic samples.

PES syringe filter membrane has the characteristics of high mechanical strength, it can handle high temperature liquid, and has a large flow rate (better than PTFE), and low protein binding force. With these functions, PES syringe filters can provide excellent performance for biological samples and culture media. The usable pH range is about 3-14.

Sterile Syringe Filters
While the primary function of a syringe filter is to remove particulates from a liquid sample, you will select either a sterile or non-sterile filter, depending on the end application.
Sterile syringe filters are used to sterilize non-sterile solutions or clarify sterile solutions. Learn more about sterile filters by application.

Aijiren’s products enable pharmaceutical companies to increase productivity. Syringe filters and vials reduce HPLC sample preparation time and consumables usage, and track-etched and membranes are also vital to extruding liposomes for encasing and targeting drugs.

Syringe filtration is a crucial technique in laboratory settings, playing a vital role in sample preparation for various analytical methods.

Ideal for use with aqueous and organic solvents, Nylon Syringe Filters are an excellent choice for filtering high-performance liquid chromatography samples. Nylon syringe filters are durable, tear resistant and wet evenly.
PES (Polyethersulfone ) syringe filter is natural hydrophilic which makes is an ideal choice (highly recommended) for aqueous solutions and alcohols. It’s not necessary to treat the filter membrane surface with wetting agents.

The advantages of Syringe Filter: The low extractable membrane and shell ensure that no filter contaminants are added to your samples. Aijiren performs performance tests under actual HPLC conditions. The integrated 1mm borosilicate glass prefilter (30mm device) ensures higher confidence in samples with high solids content.

In HPLC analysis, the particle size of the chromatographic column packing is small and it is easy to be blocked by impurity particles. Therefore, samples and solvents need to be filtered in advance to remove particulate contaminants and protect the instrument. Ion chromatography, which is commonly used in environmental analysis, also requires that no inorganic pollutants be introduced in sample pretreatment.

A syringe filter is a disposable filtration device that is attached to a syringe for the purpose of filtering or clarifying liquid samples.
It consists of a plastic housing with a membrane filter that allows for the removal of particles or contaminants from the sample as it passes through the filter.
Syringe filters are widely used in research laboratories, quality control laboratories, pharmaceutical industries, biotechnology companies, and other applications where the filtration of liquid samples is necessary.

The Non-sterile Disposable Syringe Filter is a versatile filtration device used in laboratories for sample preparation and clarification. It consists of a polypropylene housing with a membrane filter, providing efficient filtration of particulate matter and microorganisms. These syringe filters are available in various pore sizes and diameters to suit different filtration needs, and they come in non-sterile packaging.

13 mm Syringe Filters: For sample volumes <10 mL range; Ideal choice for most applications; Holdup (dead) volume is <15 ul; Female inlet luer lock; Maximum operation pressure <15 bar; Bubble point: Hydrophilic 2-3 bar; Hydrophobic 1-1.2 bar.