20mm crimp-top headspace Borosilicate vials for Lab Research

Headspace vials have different capacity specifications, including 6ml, 10ml, 20ml, etc. Use a standard sample vial to ensure sufficient headspace. Usually, the reserved volume should be at least 50% of the sample volume.

20ml,22.5ⅹ75mm, DM18
Material: USP1, Borosilicate Glass
Box packaged tpo minimize sample bottle damage.
Manufactured under strict quality, which ensures dimensional consistency from lot-to-lot
Suitable for headspace analysis of volatile solids and gases.
Store volatile samples to prevent sample evaporation
High temperature resistance and corrosion resistance
Mainly used in gas chromatography analysis for headspace analysis.

Suitable for 11mm 2ml Crimp Neck Vials & 20mm Headspace GC Vials
Caps Material: Aluminum
Use Together with PTFE/Silicone Septa or Rubber Stopper
Color: Metal Silver
Vial Septa & Rubber Stopper and Crimpers are also Provided

PTFE-fused septa are suitable to overcome the degradation, which happens due to prolonged high temperatures, commonly observed in silicone rubber septa. The degradation results in baseline drift and additional peaks. It is generally fixed with the PTFE face towards the column packing.

Headspace vials can withstand the higher temperatures and internal pressures required for volatile gas analysis. With very low metal content, extractables and leachables, top headspace vials meet high standards to meet your regulatory requirements.

Equipped with Silicone/PTFE Septa, and can also be used with slit septa. Usually the available cap color is silver, but other special colors can also be produced accordingly. There is a 9.5mm center hole in the center of the cap for automatic sample injection.

Headspace vials can withstand the higher temperatures and internal pressures required for volatile gas analysis. With very low metal content, extractables and leachables, they meet high standards to meet your regulatory requirements. These headspace vials have been specification certified for physical dimensions and autosampler compatibility.

Headspace vials are available in clear or amber glass with a round or flat base, a crimp seal with a beveled or square edge finish, or with a screw-thread finish. Headspace vials, septum, and caps can be purchased in various quantities separately or together as convenience kits to fit your laboratory needs.

20mm Crimp neck with 6ml, 10ml, and 20ml hold-up volume. Available in flat or rounded bottom designs for accurate instrument compatibility. Pre-assembled 20 mm crimp caps with septa are ready to use with any headspace crimp top vials.

Aijiren focus on improving the safety and integrity of our Headspace vial. Aijiren provide innovative 20mL 20mm Crimp-Top Headspace Vial to ensure consistent productivity in all separation processes. These 20mL 20mm Crimp-Top Headspace Vial are the best choice for GC. 20mL 20mm Crimp-Top Headspace Vialmade of borosilicate glass.

Crimp Caps squeeze the septum between the rim of the glass vial and the crimped aluminum cap. This forms an excellent seal preventing evaporation. The crimp cap vial requires crimping tools to carry out the sealing process.

The 20mm Caps with Septa are specifically designed for secure sealing and precise analysis of headspace samples in laboratory settings. These caps have a 20mm diameter, ensuring a tight and reliable fit on crimp headspace vials. The septa, made of high-quality materials, provide excellent sample integrity by preventing contamination and evaporation during storage and analysis.

Aijiren Tech Headspace Vials are available as screw or crimp neck vials with flat or round bottoms, with clear or amber glass. Headspace closures are available in pre-assembled caps with septums or can be ordered individually. Pressure release, seal with lining, and seal with magnetic lining is also optional.

Metal caps offer the widest range of temperature tolerances and are very resistant to fracture from impact. Metal caps are great for gas chromatography applications. A metal closure is manufactured from either steel (coated with anti-corrosive coating of either chromeplate or tinplate) or aluminum.

Aijiren provides one of the widest selections of Caps, Closures, and Lids available. Select from a wide variety of metal and phenolic, and polypropylene plastic bottle caps, vial lids, and other closures with an array of lining systems to fit your application and container. We also feature dispensing caps, hole caps, septa, tube caps and vial caps.

A solid disk of PTFE offers superior chemical inertness against the most aggressive solvents. The thin membrane allows for easy penetration by most needles. PTFE septa are not resealable. They should be used with relatively short cycle times or single injection methods.

Headspace vials are a kind of laboratory vials for top space analysis, with the features of high-temperature resistance and corrosion resistance.

A  headspace vial is used in the process of top – gas chromatography. When detecting volatile or semi-volatile mixtures with high boiling points, we need to heat them to vaporize them at the top. In this process, since the liquid samples are at the bottom, the material in the top gas can be measured without touching the liquid in the sample vial.

20mm crimp-top headspace vials are a type of laboratory vials commonly used in gas chromatography (GC) and gas chromatography-mass spectrometry (GC-MS) applications.
These vials are specifically designed for the analysis of volatile compounds in samples.
Headspace analysis is used when analyzing volatile or semi-volatile compounds that can be released from a solid or liquid sample into the gas phase.
This technique is particularly useful for samples that would be difficult to directly inject into a GC system or when analyzing volatile compounds in complex matrices.

The 20mm Crimp Cap is often used with Headspace Vial. It is tightly sealed and suitable for long-term storage of samples. The cap with center hole can be cut by septa, which is convenient for automatic sampling needle sampling.

Aijiren, as a supplier of chromatography consumables, provides headspace vials and sealing plugs. Aijiren s headspace vials and caps are carefully designed to prevent sample contamination and ensure accurate analysis. They come in various sizes and glass types. Optional crimping or threaded vials.

Headspace vials are available in clear or amber glass, with round or flat bases, with beveled or square crimp seals, or with screw threads. Headspace vials, septum and caps can be purchased separately in various quantities or together as convenience kits to suit your laboratory needs.

Teflon and silicone rubber or ultra-pure silicone are used as raw materials to ensure that the septa are non-toxic; to ensure excellent functions, it is particularly suitable for gas chromatography, and to ensure that the septum does not fall into the sample vial during the injection process;