20mm Crimp Caps for Headspace Vials

Aijiren’s Headspace Caps often use metal material aluminum, which is soft and convenient for Hand Crimper and Decrimper for sealing. Not only that, the Septa produced by Aijiren is also made of high-quality silicone and ptfe, and is pressed with an exclusive process. This kind of septa is not easy to deform, break, and fall off, and it can also ensure the tightness of the vial.

Aijiren Headspace Vials feature rounded shoulders and bottoms, allowing for even heating and safer operation at higher pressures. The newly designed top provides a tighter seal with your septa. Vials are manufactured from Type I borosilicate glass and accept 20 mm aluminum seals.

PTFE-fused septa are suitable to overcome the degradation, which happens due to prolonged high temperatures, commonly observed in silicone rubber septa. The degradation results in baseline drift and additional peaks. It is generally fixed with the PTFE face towards the column packing.

Headspace vials are a kind of laboratory vials for top space analysis, with the features of high-temperature resistance and corrosion resistance. The material of Headspace Vials is low extractable Borosilicate glass with low expansion rate, high-temperature resistance, high strength, high hardness, high light transmittance and high chemical stability.

Aijiren provides one of the widest selections of Caps, Closures, and Lids available. Select from a wide variety of metal and phenolic, and polypropylene plastic bottle caps, vial lids, and other closures with an array of lining systems to fit your application and container. We also feature dispensing caps, hole caps, septa, tube caps and vial caps.

Aijiren Tech headspace vials are manufactured to provide uniform glass thickness which insures even heat distribution for consistent sampling reliability. All Aijiren Tech headspace vials meet or exceed OEM instrument manufacturer’s specifications.Aijiren Tech vials are available in 20ml versions with Screw and Crimp type.

The Aijiren  Crimp vials are the standard vials for GC and HPLC. The crimp caps provide the tightest seal, reducing the chance of sample evaporation. The crimp vials and 20mm Aluminium crimp caps are economical, save your cost, and are easy to use with crimping tools.

Headspace vials can withstand the higher temperatures and internal pressures required for volatile gas analysis. With very low metal content, extractables and leachables, top headspace vials meet high standards to meet your regulatory requirements.

The butyl septa on the PTFE surface can be used in the headspace sample bottle to evaluate the injection activity and the penetration efficiency of methyl bromide on the activated carbon. The septum can be used to seal the vial during liquid sample collection for unmodified benzene analysis using HPLC method

Aluminum Caps for 20mm Crimp-top Vial
9.5mm Centre Hole
Septa: PTFE/ Silicone
Septa Size: 20*3mm

Torticollis headspace sample vial, 10mL or 20mL volume, flat-bottomed or round-bottomed 20mm crimp top vial cap to ensure consistent safety sealing.

Headspace vials are a type of sample container used in analytical chemistry, specifically for headspace analysis. Headspace analysis involves the analysis of volatile compounds present in the gas phase above a sample. These volatile compounds are typically of interest in applications such as gas chromatography (GC) or gas chromatography-mass spectrometry (GC-MS).
Headspace vials are designed to hold the sample and create a sealed environment for the vapor phase above the sample. The vials are typically made of glass, although plastic vials are also available. The vials have a specific volume capacity, which can range from a few milliliters to several tens of milliliters, depending on the application.

Headspace vials are laboratory vials for headspace analysis that are temperature and corrosion resistant. With very low metal content, extractables and leachables, they meet high standards to meet your regulatory requirements. These headspace vials have been specification certified for physical dimensions and autosampler compatibilit

Equipped with Silicone/PTFE Septa, and can also be used with slit septa. Usually the available cap color is silver, but other special colors can also be produced accordingly. There is a 9.5mm center hole in the center of the cap for automatic sample injection.

Headspace vials are available in clear or amber glass with a round or flat base, a crimp seal with a beveled or square edge finish, or with a screw-thread finish. Headspace vials, septum, and caps can be purchased in various quantities separately or together as convenience kits to fit your laboratory needs.

Suitable for 11mm 2ml Crimp Neck Vials & 20mm Headspace GC Vials
Caps Material: Aluminum
Use Together with PTFE/Silicone Septa or Rubber Stopper
Color: Metal Silver
Vial Septa & Rubber Stopper and Crimpers are also Provided

Headspace vials can withstand the higher temperatures and internal pressures required for volatile gas analysis. The Color of headspace vials is divided into two kinds of brown and transparent, the brown vials can be protected from light, and the manufacturing process adopts the molding method, which has the characteristics of thick wall, high mechanical strength, and not easy to be broken.

Crimp Caps squeeze the septum between the rim of the glass vial and the crimped aluminum cap. This forms an excellent seal preventing evaporation. The crimp cap vial requires crimping tools to carry out the sealing process.

Headspace vials are a type of laboratory vials used for gas chromatography. They are designed to contain samples that will be analyzed using headspace gas chromatography, a technique used to analyze volatile compounds in solid or liquid samples. The vials are sealed with a septum cap, allowing the headspace above the sample to be analyzed without exposing the sample to the atmosphere. This technique is commonly used in pharmaceutical, environmental, and food analysis, among other fields.
Headspace vials, also known as gas chromatography (GC) vials or sample vials, are specialized containers used for the analysis of volatile compounds in gas chromatography. They are designed to store samples and create a headspace above the sample, which contains the volatile components to be analyzed.

The 20mm septum is made of PTFE/silicone fusion, which has excellent inertness and can be used for multiple injections. The thickness is 3mm, and PTFE is about 0.08mm. The cap of the clamp-top empty bottle is made of metal aluminum