20mm Aluminum Cap

Transparent crimp top headspace vial with aluminum crimp cap and ptfe silicone septum
volume: 10ml or 20ml, diameter: 20mm neck diameter

Crimp Caps squeeze the septum between the rim of the glass vial and the crimped aluminum cap. This forms an excellent seal preventing evaporation. The crimp cap vial requires crimping tools to carry out the sealing process.

Headspace vials can withstand the higher temperatures and internal pressures required for volatile gas analysis. With very low metal content, extractables and leachables, top headspace vials meet high standards to meet your regulatory requirements.

Headspace vials are available in clear or amber glass with a round or flat base, a crimp seal with a beveled or square edge finish, or a screw-thread finish. Headspace vials, septum, and caps can be purchased in various quantities separately or together as convenience kits to fit your laboratory needs.

Teflon and silicone rubber or ultra-pure silicone are used as raw materials to ensure that the septa are non-toxic; to ensure excellent functions, it is particularly suitable for gas chromatography, and to ensure that the septum does not fall into the sample vial during the injection process;

The material of Headspace Vials is low extractable Borosilicate glass with low expansion rate, high-temperature resistance, high strength, high hardness, high light transmittance and high chemical stability. Headspace Vials suitable for headspace analysis of volatile solids and gases.

The Chromatography Direct range of 20mm Crimp Top Headspace Vials and Caps are available in 20ml Amber and Clear, 10ml and 6ml in a variety of flat and round bottom – suitable for CTC, Perkin Elmer and Aijiren autosamplers. Our 20mm Crimp Caps are Silicone/PTFE and compatibile with all autosamplers.

A solid disk of PTFE offers superior chemical inertness against the most aggressive solvents. The thin membrane allows for easy penetration by most needles. PTFE septa are not resealable. They should be used with relatively short cycle times or single injection methods.

Headspace vials are available in clear or amber glass with a round or flat base, a crimp seal with a beveled or square edge finish, or with a screw-thread finish. Headspace vials, septum, and caps can be purchased in various quantities separately or together as convenience kits to fit your laboratory needs.

A headspace vial is used in the process of top – gas chromatography. When detecting volatile or semi-volatile mixtures with high boiling points, we need to heat them to vaporize them at the top. In this process, since the liquid samples are at the bottom, the material in the top gas can be measured without touching the liquid in the sample vial.

Headspace vials are laboratory vials for headspace analysis that are temperature and corrosion resistant. With very low metal content, extractables and leachables, they meet high standards to meet your regulatory requirements. These headspace vials have been specification certified for physical dimensions and autosampler compatibilit

A headspace vial is used in the process of top – gas chromatography. When detecting volatile or semi-volatile mixtures with high boiling points, we need to heat them to vaporize them at the top. In this process, since the liquid samples are at the bottom, the material in the top gas can be measured without touching the liquid in the sample vial.

Equipped with Silicone/PTFE Septa, and can also be used with slit septa. Usually the available cap color is silver, but other special colors can also be produced accordingly. There is a 9.5mm center hole in the center of the cap for automatic sample injection.

Aijiren Tech Headspace Vials are available as screw or crimp neck vials with flat or round bottoms, with clear or amber glass. Headspace closures are available in pre-assembled caps with septums or can be ordered individually. Pressure release, seal with lining, and seal with magnetic lining is also optional.

The Aijiren  Crimp vials are the standard vials for GC and HPLC. The crimp caps provide the tightest seal, reducing the chance of sample evaporation. The crimp vials and 20mm Aluminium crimp caps are economical, save your cost, and are easy to use with crimping tools.

Aijiren focus on improving the safety and integrity of our Headspace vial. Aijiren provide innovative 20mL 20mm Crimp-Top Headspace Vial to ensure consistent productivity in all separation processes. These 20mL 20mm Crimp-Top Headspace Vial are the best choice for GC. 20mL 20mm Crimp-Top Headspace Vialmade of borosilicate glass.

Aijiren Headspace Vials feature rounded shoulders and bottoms, allowing for even heating and safer operation at higher pressures. The newly designed top provides a tighter seal with your septa. Vials are manufactured from Type I borosilicate glass and accept 20 mm aluminum seals.

The butyl septa on the PTFE surface can be used in the headspace sample bottle to evaluate the injection activity and the penetration efficiency of methyl bromide on the activated carbon. The septum can be used to seal the vial during liquid sample collection for unmodified benzene analysis using HPLC method

Headspace vials can withstand the higher temperatures and internal pressures required for volatile gas analysis. With very low metal content, extractables and leachables, they meet high standards to meet your regulatory requirements. These headspace vials have been specification certified for physical dimensions and autosampler compatibility.

Headspace vials are a type of sample container used in analytical chemistry, specifically for headspace analysis. Headspace analysis involves the analysis of volatile compounds present in the gas phase above a sample. These volatile compounds are typically of interest in applications such as gas chromatography (GC) or gas chromatography-mass spectrometry (GC-MS).
Headspace vials are designed to hold the sample and create a sealed environment for the vapor phase above the sample. The vials are typically made of glass, although plastic vials are also available. The vials have a specific volume capacity, which can range from a few milliliters to several tens of milliliters, depending on the application.

Head space vials analysis of gases present in head space sample vials,Laboratory bottles for head space analysis are called head space vials.
To get accurate results,We also have certain requirements for sample bottles and septa.
Head sample space are available with round bottom and flat bottom,as follows:
The round bottom is compatible with most automatic samplers,and the sample arm is convenient for carrying the sample vials from tray.
The flat bottom can achieve a high level of heating efficiency during manual head space injection and is suitable for certain types of instruments.

Aijiren is a manufacturer specializing in 6ml 20mm Crimp-Top Headspace Vial. Aijiren’s customers are located in more than 70 countries around the world. Aijiren has created the title of China’s well-known 6ml 20mm Crimp-Top Headspace Vial supplier with service and product quality.

According to different materials, it can be divided into two types, one is domestic borosilicate, and the other is imported first-grade hydrolyzed glass to meet different levels of customer needs.
The optional capacity is 10ml 20ml, the specifications are: 22.5*46mm, 22.5*75mm, and two colorless and brown headspace vials are provided.

10 ml 20 ml headspace vial is a specialized type of vial used in gas chromatography (GC) analysis for the analysis of volatile compounds.
It is designed to hold a sample in the headspace, which is the gas phase above the liquid or solid sample.
Head space vials analysis of gases present in head space sample vials,Laboratory bottles for head space analysis are called head space vials.
To get accurate results,We also have certain requirements for sample bottles and septa.

The Crimp Top headspace vials are made of borosilicate hydrochloric acid. It has a transparent and amber color and can withstand a temperature range of -60 to 200 degrees Celsius. Generally speaking, the volume of the headspace vial is 10-20ml, and the characteristic is 22.5*46/75mm. The performance is acid resistance, alkali resistance and high temperature resistance. Packaging usually adopts inner packaging shrink plastic box.

20mm Butyl Rubber Stopper
Material: butyl rubber
Usage: bottle mouth sealing