13mm PTFE Syringe Filter for HPLC

MCE features: relatively uniform pore size, high porosity, no media shedding, thin texture, low resistance, fast filtration rate, and minimal adsorption.
The main purpose of MCE: to filter out the particles and bacteria of liquid medicine, gas, oil, beverages, sprinkles, electronic instruments, etc., and can also be used for the detection of particles and bacteria.

In HPLC analysis, the particle size of the chromatographic column packing is small and easily blocked by contaminant particles. Therefore, samples and solvents must be pre-filtered to remove particulate contaminants and protect the instrument.

PTFE Syringe Filter is resistant to almost all corrosive chemicals, which makes PTFE syringe filters an ideal choice. However, the disadvantage of natural hydrophobic PTFE is that after many chemicals are diluted with water, the aqueous solution cannot pass through. Need to be wetted with water in advance.

Syringe filter is a small, disposable device used for filtration purposes in laboratories and other scientific settings. It consists of a plastic housing with a membrane filter at one end and a female luer lock or male luer slip connection at the other end, allowing it to be attached to a syringe.
The purpose of a syringe filter is to remove impurities, particulates, or unwanted substances from a liquid sample before it is injected or analyzed. The membrane filter within the syringe filter acts as a barrier, selectively allowing only certain particles or molecules to pass through while retaining larger particles.

The EPA VOA vials feature a secure closure mechanism to maintain sample integrity and prevent sample leakage or contamination. The vials typically come with a screw cap equipped with a septum, ensuring a tight and leak-proof seal. This closure mechanism ensures the preservation of volatile organic compounds during storage and transportation.

Feature and benefits: 0.2 ¦Ìm hydrophobic air filters are excellent industrial air filter media. Testable by water break through (WBT) test or bubble point testing.Passes USP Class VI biosafety tests for plastics. Manufactured in clean room facilities. Range of filtration areas from 4¨C2000 cm2 to support filtration volumes as small as one liter and as large as a large tank vessel

Syringe filter is a small, disposable device that is commonly used in laboratory settings to filter or clarify fluids. It is designed to be attached to the end of a syringe and acts as a barrier that removes particles and contaminants from the fluid as it is forced through the filter.
Syringe filters typically consist of a plastic housing with a membrane filter inside. The housing has a female luer lock or luer slip connection that allows it to be securely attached to the syringe. The membrane filter, which is the key component, is made of a porous material that allows the fluid to pass through while retaining particles and contaminants above a certain size.

The MCE membrane filter provides researchers with the lowest combined filter. Due to their extremely low binding characteristics, these filters provide higher throughput than competing products and reduce filter replacement when filtering protein solutions.

PTFE is a hydrophobic membrane that is chemically resistant to almost all solvents. It can be used with corrosive media, such as strong acids, alcohols, alkalis, and aromatics. The unit is readily available, allowing simple, fast and reliable HPLC or GC analysis of ultra-clean small-volume samples. PTFE filters can also be used to prevent moisture from passing through the vents.

Despite the attractive pricing, the emphasis is very much on quality. Membrane materials are supplied by the best names in the industry and the ISO9000 certified manufacturing is carried out to the highest standards, in certified clean room conditions, using the latest manufacturing technology to ensure a high quality, consistent product. All the syringe filters are HPLC certified.

Syringe Filters with hydrophobic PTFE membranes can be used for filtration of strong solvents, acids and alkalis. Not suitable for filtration of aqueous liquids. Filters with hydrophilic PTFE can be used for filtration of strong solvents, acids and alkalis. However, these syringe filters can also be used for the filtration of aqueous liquids, which makes this type very versatile.

Instructions for use and precautions:
1. It must be used with disposable syringes and glass syringes. The interface is standard. Put the needle filter on the syringe first, then pour the liquid into the syringe, press the push rod down, and collect the filtered liquid.
2. Do not use a syringe smaller than 10cc, because the small-volume column may cause the pressure to exceed the upper limit and cause damage to the filter membrane.
3. Only for laboratory use, one-time use, non-renewable.
4. The filtrate at the beginning of the part should be discarded. The volume is about the dead volume of the filter. Taking 25mm as an example, discard the first 1mL filtrate; or pre-clean the filter with 1 to 2mL of solution.

Product applications: water purification, HPLC sample preparation, mobile phase solution filtration, cell culture, microbial filtration or sampling, protein precipitate removal, particle removal and monitoring, QC analysis, content consistency, dissolution testing, environmental sampling, food analysis. Generally speaking, 0.45 ¦Ìm pore size is suitable for removing particles from samples or the mobile phase solution of chromatography equipment, and 0.22 ¦Ìm is suitable for filtering microorganisms.

Syringe filter is a small, disposable device used for filtering liquids or gases.It consists of a plastic housing with a membrane filter at one end and a female luer lock or luer slip connection at the other end, which allows it to be attached to a syringe or other fluid delivery system.
Syringe filters are commonly used in laboratory and research settings to remove particles, microorganisms, or other impurities from samples before analysis or further processing. The membrane filter in a syringe filter acts as a barrier, allowing only the desired components of the sample to pass through while retaining any larger particles or contaminants.
The choice of membrane material depends on the nature of the sample and the substances to be filtered.

Syringe filter is a disposable filter unit designed to remove impurities from liquids or gases using a syringe as the fluid delivery system.
It consists of a plastic housing with an inlet and an outlet, and a filter membrane positioned between them.
The filter membrane is often made of materials such as polypropylene, polytetrafluoroethylene (PTFE), or nylon.
To use a syringe filter, the liquid or gas to be filtered is drawn into a syringe, and then the syringe is attached to the inlet of the syringe filter.

Polypropylene (PP) is recommended for one time use only with low vapor transmission. Polypropylene is a rigid plastic that is translucent. At room temperature, polypropylene exhibits excellent chemical resistance to acids, alcohols, and bases. Polypropylene is compatible with acetone, ethyl acetate, methanol, isobutyl alcohol, methanol, and methyl ethyl ketone. Polypropylene is incompatible with cyclohexane, ethers, dichlorobenzene, pentanes, methylene chloride, and trichlorobenzene.

PTFE Syringe Filters consist of a polytetrafluoroethylene (PTFE) membrane and a polypropylene overmolded housing. Available in 13 mm and 25 mm diameters and 0.22 μm and 0.45 μm pore sizes. PTFE is the membrane of choice for use with aggressive solvents, liquids, and gases that can attack other membranes.

The hydrophobic PTFE syringe filter membrane is made of hydrophobic polytetrafluoroethylene. It filters organic solvents, aqueous solutions and gases that are chemically corrosive, and can withstand most strong acid and alkaline solutions. Product application: Used for the clarification and filtration of strong acids and alkalis, the filtration of high-temperature liquids and special chemical reagents, and the clarification and filtration of air or various gases.

The syringe filter produced by Aijiren is the preferred method for filtering small samples before being loaded into HPLC and GC, and is usually used with disposable syringes to filter out impurities in the sample to ensure that there is no quality in the test Problems and affect the experimental results.

You can choose a PTFE needle-punched filter to improve the filtration efficiency in any area. They provide high-performance filtration through an application-centric design and can be used in various industries that process organic samples.

Elevate your lab’s filtration capabilities with our High Quality PVDF Syringe Filters, designed for uncompromising performance and reliability.

The advantages of nylon: 1. Toughness 2. Wear resistance 3. Smoothness 4. Light weight 5. Insect resistance 6. Anti-mold and the material is not easy to generate static electricity, deformation, pilling and ageing.

Aijiren disposable syringe filter devices are designed to provide fast and efficient filtration of aqueous and organic solutionsfrom small volumes up to 100 mL.

Syringe filters are made of many different types of materials. Various materials, diameters, pore sizes, and sterile and non-sterile options are on our list. These syringe filters provide excellent microfiltration performance for HPLC, water treatment, environment, biotechnology, beverage, food, pharmaceutical and other related fields.