11mm Snap Top Autosampler Vial

0.45 um 25 mm syringe filters are commonly used in laboratory settings, particularly in analytical chemistry, to prepare samples for analysis or to clarify solutions before further processing. They are designed to effectively trap and remove particles, contaminants, or unwanted substances from the liquid being filtered. The filters are available in various pore sizes, allowing for the selection of a filter dat is appropriate for the specific application and the desired level of filtration.

Autoclavable PP screw cap and pouring ring
PP pouring ring designed for drip-free operation
Clear scales and large marking area
These complete bottles are autoclavable and sterilizable
These bottles are highly mechanically durable and chemically resistant

The worker of Aijiren shown in the picture is inserting a 22mm Silicone/PTFE Septa into a 24mm Screw neck Cap. The worker wears finger cots and holds a tool to press harder to consolidate the tightness of the Cap and Septa. Since Aijiren’s automated merging of Cap and Septa machines is only suitable for the closure of 2ml autosampler vial, this large-volume closure requires manual combination by workers. Aijiren uses a dust-free workshop for production and packaging, so customers can be completely assured of hygiene issues.

MCE Syringe Filter is generally used to filter neutral or partial neutral aqueous solutions, and can be used as experimental sample clarification filtration, liquid chromatography injection filtration and so on. Not suitable for filtering organic solvents and strong acid and alkali solutions. This filter is for one-time use, filtering about 10 ml at a time (specifically, there is a big difference according to the impurities of the filtered liquid), and the filter membrane cannot be disassembled. 0.45¦Ìm can remove conventional impurities and some bacteria visible to the naked eye. Generally used in conjunction with the syringe.

9mm screw thread caps, septa, and vials are designed especially for use with Aijiren’s and other rotating or robotic are samplers
2ml 12*32mm clear borosilicate glass vial,with a write-in patch; high quality polypropylene caps, ptfe / silicone septa can be pre-slit to easy needle penetration

Ptfe silicone septum for vial caps
Size: can be customized
Can be pre-slit for needle easy to puncture

Reagent bottles in tinted amber or red protect light-sensitive contents from UV light, visible light and infrared radiation. Reagent bottles are available with narrow mouths for better control while pouring, or wide mouths for easy filling or content retrieval.

Too much or too little resistance to the needle can damage the septum, damage the re-sealing, the needle may be clogged by the core ring of the septum material, or the autosampler may be damaged. The Used Aijiren silicone rubber/PTFE septum is designed to give moderate resistance to the autosampler needle during the injection process, so it penetrates correctly into the vial without damaging the septum or injection needle.

Approximately 40% larger than a normal small neck
The increase of the target area makes sample preparation easier
Large diameter is specially designed for automatic samplers such as Waters
The large-mouth design reduces the probability of bending and damage of the sample needle during the needle sampling process

PVDF syringe filters are made of hydrophilic PVDF membrane and a polypropylene overmold housing. Available in 13 mm and 25 mm diameters and 0.22 μm and 0.45 μm pore sizes.

In the sample application of choosing the appropriate syringe filter and syringe, draw your sample into the syringe and place the filter on the syringe. If you are using a leur lock filter, make sure you have properly secured the filter into the syringe tip .Push a few drops through the filter with the syringe filter facing up and “top”. Place the filter in the overturned collection container and push the sample through the syringe filter by applying gentle positive pressure. The syringe filter to be cleared and the maximum To maximize sample throughput, remove the filter from the syringe and draw air into the syringe. Then reinstall the filter and push the plunger to force some air through the filter.

2ml autosampler vials 9mm for HPLC system with bonded septa caps. Including: 100pcs Clear/amber bottles 32×11.6mm made of borosilicate glass, 2ml lab vials 9-425 screw thread, Flat base Sample Vials; Made out of USP TYPE I Glass. With writing patch for pencil mark.

Open top 30ml vial and cap with welded septum ,Pack of 100.
The only low-level certified vials in the market for Total Organic Carbon testing and sampling. Major TOC instrument manufacturers use and recommend these vials.
Vials certified, and ready to use.
Each lot of vials is tested and certified.

Order as individual sample storage vials and closures or as unassembled convenience kits.
Unassembled convenience kits saves time during sample preparation.

Solid-top convenience kits include matched quantities of vials and screw caps with pre-assembled septa.
Open-top convenience kits contain shrink-wrapped vials and separately packaged caps and septa in polybags.

Aijiren Crimp Aopsample vials have excellent sealing performance, which can effectively avoid sample evaporation. The sample vial and the corresponding 11 mm aluminum cap can be easily combined with the crimp capping tool. The vial can withstand heat and pressure, and can also be used for chemical reactions.

Reagent Bottles, also known as Media Bottles, are manufactured from high quality borosilicate 3.3 glass with a GL45 threaded cap. With their superior chemical resistance, these bottles are ideal for storing reagents, culture media, biological fluids, and a variety of other aqueous and non-aqueous solutions.

Micro-vials are small containers or vials designed to hold very small volumes of liquid or samples. They are typically used in scientific research, medical diagnostics, and pharmaceutical industries, where precise and accurate measurements of small quantities of substances are required.Micro-vials are commonly made from materials such as glass or plastic, depending on the specific application. They are designed to be airtight and leak-proof to prevent contamination or loss of the sample. The vials often have a small opening or cap that allows for controlled dispensing or extraction of the liquid or sample.

1.5ml/2ml 8-425 autosampler vial (Shimadzu chromatography sample vial) is provided by Zhejiang Aijiren Rechnology Co., Ltd., instead of imported Shimadzu sample bottle, standard GC, HPLC sample bottle, 5MM caliber, 8-425 standard Threaded port can be used for autosampler and sample storage.

Headspace vials can withstand the higher temperatures and internal pressures required for volatile gas analysis. With very low metal content, extractables and leachables, they meet high standards to meet your regulatory requirements. These headspace vials have been specification certified for physical dimensions and autosampler compatibility.

Aijiren focus on improving the safety and integrity of our samples. Aijiren provide innovative 10mm thread caps and 10mm 2ml Hplc Screw Vials to ensure consistent productivity in all separation processes. These vials are the best choice for the latest autosampler. Standard open screw vials are made of borosilicate glass with a maximum filling volume of 2ml.