11mm Snap Ring 1.5ml Autosampler Vial

Aijiren 2ml snap neck has 40% lager target area which makes it much safer for the autosampler needle. Snap vials can be closed with either snap caps or crimp caps. Snap cap vials cannot be pressurized, but can be easy as push-on, pull-off by hand. A audible click ensures a secure seal has been formed and that the cap is correctly aligned. Precision-formed neck improves autosampler handling.

11mm Snap Top Closures are made of PP. The translucent Cap design allows users to see the fixed card slot. The inside of the Snap Cap has 4 protrusions for fixing in the lateral groove of the Vial Neck.

The 2ml snap autosampler vial is often used in conjunction with the automatic sampler. The vial is made of colorless Class 1 Type A or Amber Class 1 Type B borosilicate glass with a writable label for sample identification.

The snap vials are less prone to breakage during decapping because more glass is used in the neck of the vial. The snap seal neck finish is compatible with either crimp or snap seals and no special tools are required to remove the cap. These vials are recommended for short-term sample storage and non-volatile samples because the seal is not as secure as a crimp or screw thread seal.

2ml Amber Snap Autosampler Vial is mainly used in lab chromatography analysis. This 2ml Amber Snap Autosampler Vial has some features: 1.Extremely high inertness: The inertness of the sample vial can reduce the peak variability of the analyte. 2. Consistent performance: Each batch of the sample vial has consistent performance, which saves you more time for troubleshooting and re-running samples.

Snap Vials are manufactured from Type 1 borosilicate glass(Class A, 33 expansion borosilicate glass), available in clear or amber, or from Polypropylene. Snap Vials accept both an Aluminum Snap Seal as well as a Polyethylene Snap Cap. Excellent for short term storage. Deactivation, MS Certification is also available.

Transparent, Type 1 Class A or Amber, Type 1 Class B, Aijiren viale made of borosicate glass
The Aijiren Viale has a standard calibrated write patch that is easy to fill and identify.
Snap caps used in Aijiren vial systems are a convenient replacement for aluminum seals.
Snap caps or aluminum seals ensure safe sealing of samples

The snap-on vials produced by Aijiren are made of Type 1 borosilicate glass (Grade A, 33 expanded borosilicate glass), with transparent or amber color, or made of polypropylene. The snap vial can accept either aluminum snap seal or polyethylene snap cap. Very suitable for short-term storage.

Choose from these chemically inert borosilicate glass vials, which are of high quality and suitable for most chromatographic applications. In certain applications, Aijiren? 11mm plastic crimp/bayonet vials provide an economical choice for glass. Borosilicate glass is chemically inert and suitable for most chromatographic applications. When the content of inorganic ions must be kept to an absolute minimum, borosilicate glass Snap Vial can be used.

The sample vial and caps have strict size standards and can be matched with various models of autosamplers such as Aijiren, Waters, Varian, and Shimadzu.

11mm Snap caps provide a secure seal, minimizing evaporation even with volatile samples, the audible click ensures that a secure seal has been formed and the cap is properly applied. Snap caps have septa pre-assembled, Snap caps are compatible with Aijiren Vials and other snap-ring style vials.

11mm Natural Snap-top PE Caps, 6mm Centre Hole
White PTFE/Red Silicone Septa 11*1mm
for 11mm Glass Snap Top Vials

Snap seal vials are less prone to breakage during decapping because more glass is used in the neck of the vial. The snap seal neck finish is compatible with either crimp and/or snap seals and no special tools are required to remove the cap. These vials are recommended for short term sample storage and non-volatile samples because the seal is not as secure as a crimp or screw thread seal.

Snap Cap vials Wide-mouth vials are easy to fill and provide a larger target area for the autosampler needle. Suitable for most autosamplers, it can hold 12x32mm sample bottle format, high-quality 33 expanded borosilicate transparent glass type 1 (type A) or 51A amber glass uniform, flat bottom ensures that Vial can stand stably on the desktop.

The Aijiren Vial is a standard 11.6x32mm profile and is compatible with convenient 11mm snap caps or aluminum seal closures.
“Step” design ensures proper centering of a limited amount of inserts and eliminates missed injections
The Aijiren vial has an opening 40% larger than the standard aluminum seal vial, which makes it easier to fill samples and reduces the possibility of needle bends or breaks during sampling.

The snap-on seal bottle produced by Aijiren is not easy to break during the opening process because more glass is used in the neck of the bottle. The snap-on seal neck is compatible with crimping and/or snap-on seals, and the cover can be removed without any special tools. It is recommended to use these vials for short-term sample storage and non-volatile samples, as their tightness is not as good as crimping or thread sealing.

Features: 32*11.6mm vial; 11*1mm Teflon/silicone septa; 11mm white open PP cover. It can be used on various autosamplers.

Snap Vials are manufactured from Type 1 borosilicate glass(Class A, 33 expansion borosilicate glass), available in clear or amber, or from Polypropylene. Snap Vials accept both an Aluminum Snap Seal as well as a Polyethylene Snap Cap. Excellent for short-term storage. Deactivation, MS Certification is also available.

  The 11mm snap vial is specially designed and produced to ensure that it is sealed and matched with Aijiren instruments without failure. Strictly monitor the standard operating procedures of the production process to meet the requirements of stable quality and full traceability.

2ml Snap Top HPLC Vial is made of Type 1 borosilicate glass. Comparing with 9mm screw vial, this 2ml Snap Top HPLC Vial mouth is wider opening. So 2ml Snap Top HPLC Vial is easier to fill and provides a larger target area for the autosampler needle. That means, the 2ml Snap Top HPLC Vial can protect the needle.

Due to the large amount of glass used in the vial neck, the snap seal vial is hard to break when the cap is removed. The neck finish of the snap seal is compatible with crimps and/or snap seals and does not require any special tools to remove the cap. These viars are recommended for short-term sample storage and non-volatile samples because seals are not as secure as crimp or thread seals.

2ml snap autosampler is made of colorless Class 1 Type A or Amber Class 1 Type B borosilicate glass, and attach a writable label for sample identification.

The vial cap is made of high-quality polypropylene, and the septum is made of the highest-quality materials. The precise manufacturing tolerances and the controllable manufacturing environment ensure the high efficiency of product functions.

Aijiren 2ml 11mm Snap Ring HPLC Vial is made of transparent type A type 1 or amber type B type 1 type B borosilicate glass. Amber glass can effectively block ultraviolet rays and protect sensitive samples from the volatilization caused by ultraviolet rays. Aijiren 2ml 11mm Snap Ring HPLC Vial has a standard scale and writing area for easy filling and identification.

Aijiren 2ml 11mm Snap Ring HPLC Vials has a standard scale and writing area for easy filling and identification. 2ml 11mm Sanp Ring HPLC vial can be matched with most autosamplers on the market, such as Aijiren, Thermo Fisher, Shimadzu and other well-known brands.

Snap Top 2ml HPLC Vials can accommodate 250uL Micro-inserts,The specifications of Micro-insert are 29*5.7mm, 31*5.7mm, and 31*6mm. You can choose Micro-insert according to your needs. This is more helpful for HPLC analysis of precious samples, which can save samples without causing waste.

11mm Gc Snap Top Caps With Ptfe Silicone Septa For 2ml Snap Vials , Find Complete Details about 11mm Gc Snap Top Caps With Ptfe Silicone Septa For 2ml Snap Vials,Auto Sampler Vial,Hplc Vial,Snap Vial from Supplier or Manufacturer-Jiangyin Allpro Polymer Technology Co., Ltd.