11mm Snap Cap with 20mm Septa

Polypropylene plastic material provides sensible alternative when glass is not viable
Conical insert supports samples of the highest purity and sensitivity
Clear color provides for an unhindered view of the solution to observe any changes
Highest quality ISO9001:2015 certification in the industry ensures most accurate analysis of samples

Screw vials is the most used in 2ml Autosampler vials.It is suitable for THERMO FISHER and other rotary or robotic arm samplers. 40% larger than standard narrow opening vial, prevents syringe problems. The special thread design ensures a consistent seal. Graduated write-on marking spot area, measures 0.5, 1.0 and 1.5ml.The ever flat-bottomed guarantee consistent matching between vials and truly neck 8mm for Standard Glass insert.

Chromatography commonly used in environmental analysis requires that no inorganic contaminants be introduced during sample pretreatment. In HPLC analysis and IC analysis, syringe filters can be used to filter sample solutions, which is an important step in sample pretreatment.

Open top 20ml vial and cap with welded septum ,Pack of 100.
The only low-level certified vials in the market for Total Organic Carbon testing and sampling. Major TOC instrument manufacturers use and recommend these vials.
Vials certified, and ready to use.
Each lot of vials is tested and certified.

A syringe filter (sometimes called a wheel filter for its wheel-like shape) is a single-use membrane based filter cartridge, to be attached with a syringe to remove impurities in liquid solutions. This pre-filtration step is vital in preventing damage to instruments (e.g. liquid chromatography, ICP, etc.).

20mm crimp-top headspace vials are a type of laboratory vials commonly used in gas chromatography (GC) and gas chromatography-mass spectrometry (GC-MS) applications.
These vials are specifically designed for the analysis of volatile compounds in samples.
Headspace analysis is used when analyzing volatile or semi-volatile compounds that can be released from a solid or liquid sample into the gas phase.
This technique is particularly useful for samples that would be difficult to directly inject into a GC system or when analyzing volatile compounds in complex matrices.

8-425 2ml Autosampler Vials from Aijiren is 12*32mm,It is 40% wider than the ordinary vial opening, thus ensuring that the syringe of the autosampler can pierce the bottle smoothly without errors. 8-425 2ml autosampler vials neck Suitable for Shimadzu autosampler and other rotating or robotic arm samplers.

Our storage vials, also known as step vials or dram vials offer a great solution for storing solvents for extended periods of time. Our screw thread vials offer enough threads per inch to eliminate evaporaton with a solid top or lined cap.

Micro inserts can be used with screw tops, crimp tops, or snap top vials. Seal these vials with 9 mm/10mm screw caps or 11 mm crimp/snap caps and the corresponding septa depending upon which vial type you use.

8-425 screw caps and vials are usually used in combination with Shimadzu, Spectra-Physics, Varian and other autosamplers. The vials are made of transparent type A type 1 type A or amber type B type B clear glass, and contain Adhesive label for sample identification.

All of Aijiren vials are excellently fitted for autosamplers and have good chemical compatibility and super cleanliness. The crimp top sample vial is the most commonly used gas sampling vial on the market at present. 2ml volume sample vial especially suitable for laboratory use. At the same time, some vial bottoms are designed with round bottoms, so that it has a flat bottoming function and compatibility with automatic sampling equipment.

15-425 Screw storage vials are suitable for the packaging of various pharmaceutical intermediates, high value-added chemicals, chemical reagents, biological reagents, cosmetics, essences and oils, etc. It is suitable for long-term storage and transportation for products, and has excellent sealing performance.

Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage. One piece polypropylene cap and membrane are also available. These pierceable screw thread caps are designed for one time use and reduce sample preparation time as there is no cap and seal to assemble.

Glass Screw Vials ND9mm for HPLC, Clear & Amber, with /without Patch
High Recovery Glass Screw Vials ND9mm, Clear & Amber, with /without Patch
0.3ml Glass Screw Vial integrated with Micro-insert, Base Bonded, Clear & Amber, with /without Patch
PP Screw Vials ND9mm, Clear & Amber
0.3ml PP short Screw Micro Vials, Clear & Amber

Aijiren’s screw PP cover for sample storage vial is made of high-quality polypropylene. The color is usually black and white. You can choose whether to have a cap with a center hole. A cap with a center hole will make it easier for the syringe to be in the vial. Inject the sample or withdraw the sample.

  The 11mm snap vial is specially designed and produced to ensure that it is sealed and matched with Aijiren instruments without failure. Strictly monitor the standard operating procedures of the production process to meet the requirements of stable quality and full traceability.

The metal cover provides the widest temperature tolerance range and is very resistant to impact cracking. The metal cover is very suitable for gas chromatography applications. The metal cover is made of steel (chrome-plated or tinplate anti-corrosion coating) or aluminum.

2mL Standard Opening Vials. Our standard 2 mL vial is 12 mm in diameter, 32 mm in height, and has a 4.6 mm opening. The thread size on this vial is 8-425. Choice of clear or amber glass.

Hand Decrimper, also called hand decapper, is used to open crimp caps. Simple and economical manual decapper for two different cap sizes (ND11 and ND20). Suitable for aluminum and bimetal caps, not for magnetic caps.

The 16mm COD Test Tube produced by Aijiren is mostly used for laboratory chemical analysis. Aijiren believes that COD Test Tube requires high-quality raw materials and advanced technology to complete the production, so Aijiren is very attentive to the production of COD Test Tube. Aijiren has been a veteran in the field of chromatography consumables with 20 years of production experience. He still maintains his original intention and puts the improvement of product quality in the first place.

The material of Headspace Vials is low extractable Borosilicate glass with low expansion rate, high-temperature resistance, high strength, high hardness, high light transmittance and high chemical stability. Headspace Vials suitable for headspace analysis of volatile solids and gases.

Hydrophilic nylon membranes have extremely low levels of extractables and contain no wetting agents. They offer good chemical resistance and are ideal for aqueous and most organic samples. Filters are Triton-free and have a bidirectional membrane support and luer lock inlet/outlet for a secure fit to the syringe. Membrane type and pore size are printed on each filter for easy identification. All Cole-Parmer syringe filters are 100% integrity tested and manufactured in accordance with ISO 9002 standards. Sterile filters are sterilized by gamma radiation. They are certified nonpyrogenic, noncytotoxic, and are blister packed.

The Snap Cap vial has a wide mouth vial opening of 11mm for easy filling and provides a larger target area for the autosampler needle. It is suitable for most autosamplers. The 12x32mm sample bottle format is high-quality, 33 expanded borosilicate transparent glass type 1 (Type A) or 51A amber glass, with uniform and flat texture.