2ml Snap Top HPLC Vial with Cap--Aijiren Vials for HPLC/GC

The snap cap type is convenient for direct use. Compared with polypropylene, the polyethylene material is softer and can reduce the breakage caused by excessive pressing pressure. However, it is no...

Snap Neck Amber Vial With Closures

11mm Natural Snap-top PE Caps, 6mm Centre Hole
White PTFE/Red Silicone Septa 11*1mm
for 11mm Glass Snap Top Vials

11mm Natural Snap-top PE Caps with ptfe/silicone Septa

Aijiren 2ml snap neck has 40% lager target area which makes it much safer for the autosampler needle. Snap vials can be closed with either snap caps or crimp caps. Snap cap vials cannot be pressuri...

2ml Glass Vial With Snap Closures

The sample storage vial is a storage glassware made of type 1, type A, 33 expanded borosilicate glass or 51A amber glass, with a capacity from 20mL to 60mL. The chemically inert lid is suitable for...

2ml Snap Top Autosampler Vial

Hplc Vials Septum
Red PTFE White Silicone Septum
Septum Size: 11*1mm

Red PTFE White Silicone Septum for 11mm hplc vials

2ml snap HPLC vials are less likely to be damaged when removing the cap because there is a lot of glass used in the vial neck. Snap-neck HPLC vials are compatible with either crimps or snap vial devices. You don’t need any special tools to remove the cap. Because seals are not as safe as crimps or threaded seals, 2ml snap HPLC vials are recommended for short-term sample storage and non-volatile samples.

2ml 11mm Snap Top HPLC Vials for Aijiren

Chromatography autosampler vials are widely used in chromatography, chemistry, medical and other fields. Autosampler vials are generally made of hydrolytic glass or borosilicate, with various specifications. Different vial mouth designs meet different actual needs.

Free Sample Clear And Amber Hplc 2ml Autosampler Vials Crimp or Snap Top

Snap Vials are manufactured from Type 1 borosilicate glass(Class A, 33 expansion borosilicate glass), available in clear or amber, or from Polypropylene. Snap Vials accept both an Aluminum Snap Seal as well as a Polyethylene Snap Cap. Excellent for short term storage. Deactivation, MS Certification is also available.

2ml Glass Snap Top Autosampler Vial for Aijiren

The 11mm septum of the 2ml snap glass vial uses high-quality materials to ensure good functionality and can be slit in advance to facilitate needle penetration. It is specially designed for single ...

Snap Vial With Closures On Sale

1.5ml snap vial, 12x32mm, 11mm crimping surface treatment. Aijiren bayonet vials can be safely sealed with Aijiren plastic seals and aluminum crimp seals that have obtained proprietary technology. ...

11mm Snap Neck Glass Vial

20ml headspace vialND11 Snap Top HPLC Vial for Aijiren

The 2ml snap HPLC vial is made of type 1 borosilicate glass. Compared to 9mm screw vials, this 2ml snap hplc vial opening is a wider opening. Therefore, the 2ml snap top HPLC vial is easy to fill and increases the target area of the autosampler needle. This means that 2ml snap-top HPLC vials can protect needles.

The 2ml snap-top HPLC vial size is 11.6x32mm and is compatible with most autosamplers such as Aijiren. 2ml HPLC vials are available in amber and transparent colors. The bottom of the vial is flat. It is convenient to put. Aijiren offers 2ml snap-top HPLC vials and pads at wholesale prices.

ND11 Snap Top HPLC Vial for Aijiren

Snap ring closures N11 should only be used in HPLC, as the punctual compacting pressure of the septum against the vial rim by the four pins in the cap does not achieve the same level of tightness a...

11mm Amber Glass Vial

Aijiren Vials have a standard 11.6x32mm profile and are compatible with convenient 11mm snap cap or aluminum seal closures
The “Step” design ensures proper centering of limited volume inserts, eliminating missed injections
Aijiren Vials have a 40% larger opening than standard aluminum seal vials for easier sample filling and to reduce the chance of bent or broken needles during sampling

11mm Snap Top HPLC Vials for Aijiren

2ml snap vial is widely used in HPLC applications and can be used almost as universal sample vials for autosamplers, including sample vials with automatic operation. The bayonet cap or crimp cap ca...

2ml Snap Vial With Closures

Snap Cap Vials Wide opening vial is easier to fill and provides a larger target area for the autosampler needle Fit most autosamplers that accommodate the 12x32mm vial format Superior quality 33 expansion borosilicate clear glass Type 1, (Class A) or 51A amber glass Uniformly flat

2ml Clear Glass for HPLC Autosampler

Padded 2ml snap top Autosampler vials are widely used in experiments. The pads are made from PTFE and high quality silicone rubber or ultra-high purity silicone as raw materials. Make sure the gasket is non-toxic. Using an adhesive-free adhesive process, PTFE film and silicone rubber or silicone adhere and maintain a composite post-interval Teflon layer contact reagent with good properties, good chemical inertity of the two materials.

ND11 Autosampler Snap Vials for Aijiren

Snap seal vials are less prone to breakage during decapping because more glass is used in the neck of the vial. The snap seal neck finish is compatible with either crimp and/or snap seals and no special tools are required to remove the cap. These vials are recommended for short term sample storage and non-volatile samples because the seal is not as secure as a crimp or screw thread seal.

Amber Glass Snap Vials for HPLC for Aijiren

Using these bottles for sample storage can reduce the leaching of ions while ensuring that the sample maintains a consistent pH value over its lifetime. The sample storage screw-top bottle is made ...

11mm Glass Autosampler Vial

Features: 32*11.6mm vial; 11*1mm Teflon/silicone septa; 11mm white open PP cover. It can be used on various autosamplers.

2ml snap amber sample vial

Snap-top bottles and bottle caps are a simple and effective way to ensure sealing, without a capper. Easy to press and open. The crimp cap can also be used for wide-mouth bayonet bottles. But it ca...

1.5ml Snap Vial With Pp Cap

Use 13 x 425 bottle caps with septa for sample vials and diffusion caps for rinsing bottles. These vials have a closed top screw seal and can also be used as storage vials. Red PTFE/white silicone ...

2ml Snap Glass Vial with Closures

Aijiren Vials manufactured of Clear, Type 1 Class A or Amber, Type 1 Class B, borosilicate glass
Aijiren Vials have a standard graduated write-on patch for easy filling and identification
Snap caps used with the Aijiren Vial system are a convenient alternative to aluminum seals
Snap caps or aluminum seals ensure a secure seal for samples

11mm Snap Ring Glass Vial for Aijiren

Store samples in these vials to eliminate leaching of ions while maintaining a constant pH value for the life of the sample. The storage bottle ranges from 20mL to 60mL.

11mm Snap Neck Caps

The sample vial and caps have strict size standards and can be matched with various models of autosamplers such as Aijiren, Waters, Varian, and Shimadzu.

11mm snap vial, 2ml, clear, with snap cap

The 2ml SNAP sample bottles are available in two different materials, one is domestic borosilicate and the other is imported first grade hydrolyzed glass, which can meet different levels of custome...

Amber Glass Snap Vial For Sale

Aijiren Storage vial is an ideal device for general laboratory use and storage of diverse samples due to excellent sealability and chemical tolerance. Besides, chemically inert caps are a good choi...

2ml 11mm Snap Top Glass Vial

The 2ml snap autosampler vial is often used in conjunction with the automatic sampler. The vial is made of colorless Class 1 Type A or Amber Class 1 Type B borosilicate glass with a writable label for sample identification.

2ml snap autosampler vials

Aijiren 2ml 11mm Snap Ring HPLC Vials has a standard scale and writing area for easy filling and identification. 2ml 11mm Sanp Ring HPLC vial can be matched with most autosamplers on the market, such as Aijiren, Thermo Fisher, Shimadzu and other well-known brands.

1.5mL 11mm Snap Ring Autosampler Vial ND11

Snap Cap Vials Wide opening vial is easier to fill and provides a larger target area for the autosampler needle Fit most autosamplers that accommodate the 12x32mm vial format Superior quality 33 expansion borosilicate clear glass Type 1, (Class A) or 51A amber glass Uniformly flat

11mm Snap Cap Vials for Aijiren

11mm standard 2ml transparent threaded sample bottle (2ml automatic sample bottle), 2ml, 12*32mm, bottle mouth diameter 11mm; red PTFE/white silicone bottle gasket, blue perforated polypropylene (P...

11mm Snap Top Amber Vial