11mm Crimp top HPLC Borosilicate glass vials with PTFE silicone septa

All of Aijiren vials are excellently fitted for autosamplers and have good chemical compatibility and super cleanliness. The crimp top sample vial is the most commonly used gas sampling vial on the market at present. 2ml volume sample vial especially suitable for laboratory use. At the same time, some vial bottoms are designed with round bottoms, so that it has a flat bottoming function and compatibility with automatic sampling equipment.

The 9mm screw neck vial is the 9mm screw neck vial, which has the highest sales volume among Aijiren’s HPLC vials, because it can be used with most autosamplers on the market. In addition, the 9mm screw neck vial has a wide mouth and is convenient for automatic injection. Needle for pulling samples.

The sample vial and caps have strict size standards and can be matched with various models of autosamplers such as Aijiren, Waters, Varian, and Shimadzu.

These vials are the preferred choice for modern autosamplers. With a focus on improved sample security and integrity, we now offer innovative 9mm closures and 9mm screw top vials for consistent productivity on every separation.
Standard opening screw-thread vials are manufactured from borosilicate glass and have a maximum fill volume of 2 ml.

The Aijiren 8-425 screw cap and vial are suitable for waters and other rotating or robotic arm samplers. The specifications for the 8-425 HPLC sample vial are 12 x 32 mm. The opening of the 8-425 HPLC sample vial is 40% larger than the standard narrow opening vial, preventing syringe problems. Accurately handle bottlenecks and enable the mechanical arm to operate efficiently. The special screw design ensures a consistent seal.

Padded 2ml snap top Autosampler vials are widely used in experiments. The pads are made from PTFE and high quality silicone rubber or ultra-high purity silicone as raw materials. Make sure the gasket is non-toxic. Using an adhesive-free adhesive process, PTFE film and silicone rubber or silicone adhere and maintain a composite post-interval Teflon layer contact reagent with good properties, good chemical inertity of the two materials.

Snap caps provide a secure seal that minimizes evaporation, even with volatile samples. Snap caps are often more convenient than crimp caps as they can easily be applied and removed by hand. An audible click ensures a secure seal has been formed and that the cap is correctly aligned. Snap/crimp vials can be closed with either snap caps or crimp caps.

• Widely used in HPLC applications, universally usable vials for almost autosamplers, include the one with robotic handing.
• Snap vials can be closed with either snap caps or crimp caps.
• Snap caps can be easy as push-on, pull-off by hand.
• Clear glass vials–made from USP Type I, Class A, 33Borosilicate Expansion glass
• Amber glass vials—made from USP Type 1 Class B, 51Borosilicate Glass.

Standard GC, HPLC sample vial, small caliber, 8-425 standard threaded mouth, can be used for autosampler and sample storage. It can be used with 8-425 screw cap septum.
8-425 Autosampler Vial, often used in conjunction with Shimadzu, Spectrophysics, Varian, and other autosamplers. The vial is made of colorless Class 1 Type A or Amber Class 1 Type B borosilicate glass , And attached with a writable label for sample identification.
The vial cap is made of high-quality polypropylene, with precise manufacturing tolerances and a controllable manufacturing environment. The gasket is made of the highest quality PTFE/silicone to ensure the high efficiency of the function.

2mL Amber Glass Screw Top Autosampler Vials are available in a variety of neck finishes and opening diameters. Large mouth or wide ID vials have approximately a 40% wider mouth opening than standard opening vials. The large opening reduces the risk of bent autosampler needles during sampling. When choosing a 2mL Amber Glass Screw Top Autosampler Vials, the product material is of paramount importance.

2ml 9mm Screw Top Autosampler Vials are cleaned and packaged in a certified Class 10,000 clean room according to a designed process, developed to eliminate chromatographic errors associated with vials. For Chromatography vials, 2ml 9mm Screw Top Autosampler Vials is the most commonly vial in laboratories. 2ml 9mm Screw Top Autosampler Vials are more leak-tight and easy for the experimenter to operate.

The function of crimping top sample vials, Strict quality assurance provides dimensional consistency between batches, Optional ceramic write points with filling marks, Certified and fully compatible with autosampler.

The Screw Caps that are inlcuded with this kit are knurled on the sides for excellent gripping and comfort when applyting to the vial. The silicone rubber / PTFE septa used were designed to provide the right amount of resistance to autosampler needles during the injection process so that they penetrate the vial properly without damaging the septa or the injection needle. Too much or too little resistance to the needles can damage the septa, compromise resealing, cause needle blockage from coring of the septa material and even damage your autosampler. These septa perform even when using a wide range of needles: fine, blunt or even dull. Low sample or solvent evaporation performance even after multiple injections have been observed when using aijiren caps.

Aijiren screw thread top sample vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called a autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial. The design of Aijiren screw thread top vials are developed from Europe and the United States, and the design feature is easy to use, especially the use of automated sample introduction system. Aijiren screw thread top vials also known as autosampler bottles.

Aijiren 2ml snap neck has 40% lager target area which makes it much safer for the autosampler needle. Snap vials can be closed with either snap caps or crimp caps. Snap cap vials cannot be pressurized, but can be easy as push-on, pull-off by hand. A audible click ensures a secure seal has been formed and that the cap is correctly aligned. Precision-formed neck improves autosampler handling.

All Aijiren vials are very suitable for autosamplers and have good chemical compatibility and ultra-cleanliness. The crimp top sample bottle is currently the most commonly used gas sampling bottle on the market. The sample bottle with a volume of 2ml is especially suitable for laboratory use. At the same time, the bottom of some sample bottles is designed with a round bottom, so it has a flat bottom function and is compatible with automatic sampling equipment.

Although most laboratories have switched to 9 mm screw thread vials for a wider opening while still being autosampler compatible, some labs use 8-425 vials for storing solvents. The standard opening 8-425 vials have more threads per inch, so there is less likelihood that volatile solvents will evaporate over time.

9mm thread caps, septums, 9mm 2ml HPlc screw vials are specifically designed for use with THERMO FISHER and other rotating or robotic arm samplers. 9mm2ml Hplc screw vials are manufactured in transparent glass, Type 1 Class A or Amber, Type 1 Class B borosilicate glass and contains a write patch for sample identification. Amber glass prevents exposure to UV light and protects sensitive samples.

The Aijiren sample vials are highly sealed to effectively avoid sample evaporation. Vials and corresponding 11 mm aluminum caps can be easily and quickly combined with jaw capping tools. Vials can withstand heat and pressure and can also be used for chemical reactions. It can be used as an anhydrous and anaerobic reactive vial, especially for white open caps and thick PTFE/silicon septum vials.

Aijiren’s Snap Vial is commonly used in HPLC analysis and is popular because of its convenient sealing. The glass of Aijiren snap vial is borosilicate hydrochloric acid glass that can hold samples and is not easy to change. The Cap of Snap Vial is Pe Cap, which is soft and easy to handle.

4ml 13-425 hplc vial with screw cap is belong to HPLC autosampler vials. The classification of HPLC autosampler vials is generally done based on the diameter of the vial body, vial height, and thread finish. Clear glass and amber glass present similar inertness. 4ml 13-425 hplc vial with screw cap is compatible to SHIMADZU instrument. Autosampler needle pierces through the cap during injection and withdraws the required amounts of analyte from the sample vial.

2ml snap HPLC vials are less likely to be damaged when removing the cap because there is a lot of glass used in the vial neck. Snap-neck HPLC vials are compatible with either crimps or snap vial devices. You don’t need any special tools to remove the cap. Because seals are not as safe as crimps or threaded seals, 2ml snap HPLC vials are recommended for short-term sample storage and non-volatile samples.

4ml borosilicate glass vials are commonly used in high-performance liquid chromatography (HPLC) for sample storage and analysis. Borosilicate glass is preferred in HPLC because it offers excellent chemical resistance and thermal stability, making it suitable for handling a wide range of solvents and temperature conditions.When working with water samples in HPLC, borosilicate glass vials are a suitable choice due to their resistance to water and other polar solvents.

1.5/2ml autosampler vial refers to a type of sample container commonly used in analytical chemistry and laboratory settings.
The vial has a total volume capacity of 1.5 to 2 milliliters (ml).
Autosampler vials are designed to be compatible with automated liquid handling systems, such as autosamplers, which are used to inject samples into analytical instruments for analysis.
The vial typically consists of a cylindrical glass or plastic body with a narrow opening at the top.
It is sealed with a cap or septum to prevent sample contamination and evaporation.

Neck Type: Screw, Snap / Crimp
Neck Diameter: 8-425, 9mm, 10-425, 11mm
Color: Clear / Amber
Graduated: with or without
Material: Borosilicate Glass

The 2ml Snap Vial provided by Aijiren is suitable for use on Waters Autosampler. The bayonet design of Snap makes the operation of capping Vial very convenient. Aijiren’s Snap Top Vial Cap is made of high-quality PP plastic, and can be customized in a variety of colors to meet customer needs.

Aijiren Clear 8-425 HPLC Sample Vial, Clear Type 1 Class A, Amber 8-425 HPLC Sample Vial is manufactured in Type 1 Class B Borosilicate Glass, sample identification, measurement values 0.5, 1.0 and 1.5 ml. Consistency between the vial and the true neck 6mm of the standard glass insert is always guaranteed.

2ml UPLC (Ultra-Performance Liquid Chromatography) glass vial refers to a specific type of vial used in analytical chemistry for storing and handling liquid samples in UPLC systems. UPLC is a high-pressure liquid chromatography technique that allows for fast and efficient separation of compounds in a liquid sample.
These vials are specifically designed to withstand the high pressures and temperatures often encountered in UPLC systems. They are typically equipped with a screw cap or a snap-on cap to provide a secure seal and prevent leakage or contamination of the sample.

Approximately 40% larger than a normal small neck
The increase of the target area makes sample preparation easier
Large diameter is specially designed for automatic samplers such as Waters
The large-mouth design reduces the probability of bending and damage of the sample needle during the needle sampling process