11mm 2ml Autosampler Vial for HPLC

Hplc Vials Septum
Red PTFE White Silicone Septum
Septum Size: 11*1mm

The opening of the vial produced by Aijiren is 40% larger than the standard opening aluminum sealed bottle
It is made of transparent Class 1 Class A or Amber, Class 1 Class B borosilicate glass
Sample vials provide standard progressive pasteable patches for easy filling and identification

PTFE is the most inert but its poor resealability making it unsuitable for multiple injections or storage. For layered septa such as PTFE/silicone the chemical resistance of the septa is that of PTFE until the septum is punctured. Once punctured, the silicone layer is exposed and able to react with sample/solvent so the chemical resistance of silicone should be considered when using these septa.

The crimp type vial, bottom diameter is 11.6mm, the height is 32mm, the neck diameter is 11mm. Actual capacity 2mL, standard capacity 1.5mL

The function of crimping top sample vials, Strict quality assurance provides dimensional consistency between batches, Optional ceramic write points with filling marks, Certified and fully compatible with autosampler.

0.3 ml clear glass micro insert fixed in 2ml glass vial. Conical base micro  insert vial can saving samples while during injection.  Wide opening top for better needle injection.

The Aijiren sample vial has excellent sealing performance, which can effectively avoid sample evaporation. The vial and the corresponding 11 mm aluminum cap can be easily and quickly combined with the jaw capping tool. The vial can withstand heat and pressure, and can also be used for chemical reactions. Especially for vials with white open caps and thick PTFE / silicone septa, they can be used as anhydrous and oxygen-free reaction vials.

Aijiren Crimp Top vials are excellently fitted for autosamplers and have good chemical compatibility and super cleanliness. The crimp top sample vial is the most commonly used gas sampling vial on the market at present. 2ml volume sample vial especially suitable for laboratory use. At the same time, it has a flat bottoming function and compatibility with automatic sampling equipment.

The standard 11.6x32mm profile is compatible with 11mm aluminum seal closures
For closure selections please see Aluminum Seals.
Silanized glass vials are an excellent solution when protein absorption must be avoided. The silanization process deactivates charged SiOH sites on the glass surface, limiting the hydrophobic effect.

HPLC autosampler vials  are generally categorized by vial diameter, vial height, and thread finish. Clear glass and amber glass have similar inert properties. Amber glass is used to protect sensitive samples from UV light. Markings on the vials provide sample identification information. Autosampler vials can be used to inject samples from an autosampler.

All Aijiren vials are ideal for autosamplers and have excellent chemical compatibility and ultra-cleanliness. Crimp top sample vials are currently the most commonly used gas sampling vials on the market. Sample vial with a 2ml capacity that is particularly suitable for use in laboratories. At the same time, some vial bottoms are designed to be round bottoms, so the bottom is flat and compatible with automatic sampling equipment.

2ml sample vial s equipped with a silver aluminum cap that has an ND11 (Narrow Diameter 11mm) size that cap is designed to fit the vial securely and provide a seal to prevent leakage or contamination.
The silver aluminum caps are designed to provide a secure closure for the vial, ensuring that the sample inside remains sealed and protected from contamination or leakage.
Overall, the combination of a 2ml sample vial with silver aluminum caps provides a reliable and convenient solution for storing and preserving small liquid samples in a laboratory or industrial environment.

The crimp vials produced by Aijiren are made of transparent or amber type 1 borosilicate glass or polypropylene. Requires crimper and lid opener. Very suitable for long-term storage. Deactivation and MS authentication can also be used.

The Aijiren sample vial has excellent sealing performance, which can effectively avoid sample evaporation. The vial and the corresponding 11 mm aluminum cap can be easily and quickly combined with the jaw-capping tool. The vial can withstand heat and pressure, and can also be used for chemical reactions. Especially for vials with white open caps and thick PTFE / silicone septa, they can be used as anhydrous and oxygen-free reaction vials.

Features of 11mm 2ml crimping top sample vials: Strict quality assurance provides dimensional consistency between batches, optional ceramic writing points with filling marks, certified, and fully compatible with autosample

The Crimp Vial produced by Aijiren has a standard 11.6x32mm shape and is compatible with 11mm aluminum sealing caps. Hand Crimper is required for crimp sealing and Decrimper for unsealing. Aijiren provides supporting 11mm Hand Crimper and Decrimper, which are easy to operate and well sealed.

All of Aijiren vials are excellently fitted for autosamplers and have good chemical compatibility and super cleanliness. The crimp top sample vial is the most commonly used gas sampling vial on the market at present. 2ml volume sample vial especially suitable for laboratory use. At the same time, some vial bottoms are designed with round bottoms, so that it has a flat bottoming function and compatibility with automatic sampling equipment.

All of Aijiren 2ml vials are excellently fitted for autosamplers and have good chemical compatibility and super cleanliness. The crimp top sample vial is the most commonly used gas sampling vial on the market at present. 2ml volume sample vial especially suitable for laboratory use. At the same time, some vial bottoms are designed with round bottoms, so that it has a flat bottoming function and compatibility with automatic sampling equipment.

Use Aijiren 11 mm Glass Crimp Top Vials with aluminum crimp seal closures. These high-quality 11 mm glass vials are 2 mL, 12 x 32 mm and fit most brands of autosamplers. Made of superior quality 33 expansion borosilicate clear (Type 1, Class A), they meet all requirements of US, EU, JPN Pharmacopia. Choose from Aijiren brands.

HPLC autosampler vials  are generally categorized by vial diameter, vial height, and thread finish. Clear glass and amber glass have similar inert properties. Amber glass is used to protect sensitive samples from UV light. 

All of Aijiren vials are excellently fitted for autosamplers and have good chemical compatibility and super cleanliness. The crimp top sample vial is the most commonly used gas sampling vial on the market at present. 2ml volume sample vial especially suitable for laboratory use. At the same time, some vial bottoms are designed with round bottoms, so that it has a flat bottoming function and compatibility with automatic sampling equipment.

Polypropylene Snap Micro Vials can be used in most standard gas and liquid chromatography autosamplers. The conical interior ensures maximum retrieval of contents without the hassle of using removable liners.

Crimp vial is manufactured from type 1 borosicate glass, or polypropylene, available in transparent or scarlet. I need a clamper and a decapper. Ideal for long-term storage. De-activation and MS certification are also available.

All Aijiren vials are very suitable for autosamplers and have good chemical compatibility and ultra-cleanliness. The crimp top sample bottle is currently the most commonly used gas sampling bottle on the market. The sample bottle with a volume of 2ml is especially suitable for laboratory use. At the same time, the bottom of some sample bottles is designed with a round bottom, so it has a flat bottom function and is compatible with automatic sampling equipment.