1000Ml Amber Glass Reagent Bottle

With a large enough change in temperature, the neck of the bottle can actually crack if it shrinks too tight around the stopper. Additionally, if hot liquid is poured in the bottle, the liquid will form an air-tight seal between the stopper and bottle and as the liquid and steam in the bottle cool and shrink, the stopper will be pulled down into the bottle neck.? This is the same principle that makes the center of a canning jar lid pop down until the seal is released.

Features of reagent bottle: permanent white enamel marking point, GL 45 thread, no lining, autoclaving (140¡ãC), borosilicate glass, polypropylene cover, technical parameters. The reagent bottle produced by Aijiren is chemically resistant, conforms to ISO and SGS standards, has a heat resistance of +500 ¡æ, and has good thermal shock performance. It is an ideal container for high-temperature substances and can be used for high-temperature sterilization.

Aijiren reagent bottles provide unrivalled uniform wall thickness distribution.
Improved mechanical stability and resistance to temperature changes
Prevents the stress that occurs in the glass and the possibility of rupture during heating and cooling
Advantages: Improve employee safety, extend the service life of experimental glassware, and protect valuable substances.

All Aijiren bottles have permanent white enamel scales for volume measurement; white identification boxes for marking or coding.
All Aijiren media bottles include non-drip sealing rings and standard blue polypropylene (GL45) sealing caps.

Reagent bottle is a type of laboratory glassware used for storing and dispensing chemical reagents. Reagents are substances that are used in chemical reactions or laboratory analysis to produce a chemical change or to detect, measure, or test other substances. Reagent bottles are specifically designed to safely contain and preserve these reagents.
Reagent bottles are typically made of glass, although plastic versions are also available for certain applications. Glass reagent bottles are preferred because they are chemically inert, meaning they do not react with most chemicals and do not contaminate the reagents being stored.

Reagent bottle is a type of laboratory glassware used for storing and dispensing chemical reagents. It is designed to hold relatively small amounts of liquid reagents and is typically made of glass, although plastic reagent bottles are also available.
Reagent bottles have several distinctive features. They usually have a narrow neck and a wide base, which provides stability and prevents tipping. The neck of the bottle is often equipped with a screw cap or a ground glass stopper to provide a secure seal and prevent the evaporation or contamination of the reagent. The cap or stopper may also have a liner or seal to enhance the closure.

Screw caps are the most common type of cap for GL45 reagent bottles. They feature a threaded design that allows for a secure closure by twisting the cap onto the bottle neck. Screw caps provide a tight seal, preventing leaks, evaporation, and contamination of the reagent. They are often made of materials such as polypropylene or high-density polyethylene (HDPE), which offer good chemical resistance. Screw caps can be easily removed and replaced, making them convenient for frequent access to the reagent.

Reagent Bottles, also known as Media Bottles, are manufactured from high quality borosilicate 3.3 glass with a GL45 threaded cap. With their superior chemical resistance, these bottles are ideal for storing reagents, culture media, biological fluids, and a variety of other aqueous and non-aqueous solutions.

Aijiren reusable media bottles are manufactured from high quality, borosilicate 3.3 glass. With their superior chemical resistance, these bottles are ideal for storage of reagents, culture media, biological fluids and a variety of other aqueous and non-aqueous solutions.

Reagent bottles, also known as media bottles or graduated bottles, are containers made of glass, plastic, borosilicate or related substances, and topped by special caps or stoppers. They are intended to contain chemicals in liquid or powder form for laboratories and stored in cabinets or on shelves.

The screw caps on these bottles are made of heat-resistant thermoplastic polyester and can be sterilized with hot air at temperatures up to 180°C, compared to 140°C for bottles with polypropylene screw caps.Bottles with thermoplastic polyester caps, Teflon sealing discs and pouring rings
Withstands hot air sterilization up to 180°C
PTFE sealing discs resist chemical attack
Made of high-temperature and chemical-resistant borosilicate glass