10-425 HPLC Vials from Aijiren on Sale

Caps are made of high quality polypropylene, Caps have the profile of a crimp or snap closure for compatibility with robotic autosamplers, Pre-assembled septa reduces the chance of contamination during sample preparation, while saving sample preparation time in the lab.

Screw cap vials are a practical packaging solution for sample-size health, beauty, and pharmaceutical products. Glass screw cap vials are impermeable and don’t undergo chemical leaching, so your products stay pure. Uses for Screw Cap Vials. Use glass screw cap vials to package sample products or as full-size product packaging options.

Vials are manufactured in clear type 1 class A or amber type 1 class B borosicate glass. 10-425 screw fasteners and 10mm septum must be used. See Assembly Caps and Septum Limited volume micro-insert for wide opening 10-425 vial.

1. Septa and slit septa are available.
2. Normal Available cap color is Black, other special colors can be also produced.
3. Pre-assembled caps and septa are convenient and minimize contamination from handling.
4. Phenolic caps can be autoclaved.

Chromatography vial is a glass vial used by automatic samplers and headspace samplers such as liquid chromatography, gas chromatography, mass spectrometry, etc. for chromatographic automatic sampling.  10-425 Screw Glass vial for autosampler instrument is made of borosilicate glass.

Screw cap vials are a practical packaging solution for sample-size health, beauty, and pharmaceutical products. Glass screw cap vials are impermeable and don’t undergo chemical leaching, so your products stay pure. Uses for Screw Cap Vials. Use glass screw cap vials to package sample products or as full-size product packaging options.

Chromatography sample vial is a glass vial used by automatic samplers and headspace samplers such as liquid chromatography, gas chromatography, mass spectrometry, etc. for chromatographic automatic sampling.  10-425 Screw Glass vial For autosampler instrument is made of borosilicate glass.

Clear Glass Screw Thread Vials are 2mL, 12x32mm and built with Advanced Vial Closure System (AVCS). This innovation not only prevents septa push through, but provides a stop point for the cap to prevent over- or under-tightening and provide an optimal, consistent seal every time.

10mm sample bottles are widely used in the pretreatment of samples analyzed by gas chromatography and liquid chromatography. With the development of testing technology and the improvement of testing standards, the quality requirements for sample bottles have also increased. The 10mm large opening of Aiji can effectively prevent the risk of injection needle deviation.

Aijiren 10mm hplc vial
The bottom diameter is 11.6mm, the height is 32mm, and the diameter is 10mm;
The actual capacity is 2mL, the standard capacity is 1.5mL;
The characteristics of the related parameters of the cover pad: the diameter of the septum is 10mm, and the thickness is 1.5mm;
The opening diameter of the lid is 7mm; the applicable diameter of the lid is 10mm,
GPI standard 425 thread.

Aijiren’s 10-425 screw vial is made of borosilicate hydrochloric acid glass, which has the characteristics of high temperature resistance and corrosion resistance, 10-425 screw vial is very compatible with the automatic sampler with a mechanical arm.

4ml 13-425 screw neck vial, also called wash vial or waste vial, is for cleaning the needles during automatic sampling
13-425 screw thread caps, septa, and vials are designed for specific use with the Shimadzu and Waters WISP 48-Position Autosampler

PTFE is the most inert, but it has poor resealability, so it is not suitable for multiple injections or storage. For layered septa (such as PTFE/silicone), the chemical resistance of the septum is PTFE until the septum is punctured.

Aijiren screw thread top sample vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called a autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial. The design of Aijiren screw thread top vials are developed from Europe and the United States, and the design feature is easy to use, especially the use of automated sample introduction system. Aijiren screw thread top vials also known as autosampler bottles.

Approximately 40% larger than a normal small neck
The increase of the target area makes sample preparation easier
Large diameter is specially designed for automatic samplers such as Waters
The large-mouth design reduces the probability of bending and damage of the sample needle during the needle sampling process

Aijiren specializes in the production of Autosampler Vials, has its own production plant, and has purchased a large number of production equipment for assembly line production. At present, Aijiren has become the largest manufacturer of chromatographic consumables in southern China. Among them, Autosampler Vials is Aijiren’s most important product and the most customers. Products needed.

Aijiren screw thread top sample vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called a autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial. The design of Aijiren screw thread top vials are developed from Europe and the United States, and the design feature is easy to use, especially the use of automated sample introduction system. Aijiren screw thread top vials also known as autosampler bottles.

Aijiren 10mm wide opening screw vial 2mL, 12x32mm 10mm wide opening screw vial and insert. 10-425 thread finish. The vial has a calibrated write patch that is useful for identifying samples. The neck opening is wide and easy to fill.

Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage.

The 10-425 vial was the original wide mouth to replace the 8-425 screw vial. Today, it is recommended to use a 9mm wide-mouth screw thread vial. This is because it is more versatile and compatible with autosamplers without sacrificing a wide mouth for pipette operation.

10-425 Screw Glass vial For autosampler instrument is made of borosilicate glass. This 2ml glassware laboratory Agilen Hplc Vials can be seen in more than 32 countries laboratory. HPLC autosampler vials are generally categorized based on vial diameter, vial height, and thread finish.

HPLC Vial 10-425 1.5ml Screw Vial. The wide open vial has a larger target area to make it easier to prepare the sample and to reduce the possibility of the needle bending or bending during sampling. Vials are manufactured in clear type 1 class A or amber type 1 class B borosicate glass. 10-425 screw fasteners and 10mm septum must be used.

Screw-top vials also come in different sizes, with vial caps made of either aluminum for crimp seals or plastic. Amber glass vials are available in 2ml volume with a screw top. Inserts work in conjunction with any autosampler and fit either standard or wide openings vials.