1.5ml Screw Borosilicate Glass Chromatography Autosample Vials for Supply

The function of crimping top sample vials, Strict quality assurance provides dimensional consistency between batches, Optional ceramic write points with filling marks, Certified and fully compatible with autosampler.

Polypropylene Screw Cap with Septa – Polypropylene screw cap with precision-fit septa provide an evaporation-proof seal. Bi-layer include silicone and PTFE. Silicone septa for multiple injections.

Screw cap vials are a practical packaging solution for sample-size health, beauty, and pharmaceutical products. Glass screw cap vials are impermeable and don’t undergo chemical leaching, so your products stay pure. Uses for Screw Cap Vials. Use glass screw cap vials to package sample products or as full-size product packaging options.

The vial is made of colorless Class 1 A or amber Class 1 B borosilicate glass. The automatic sample vial is produced from high-quality raw materials. It has high-temperature resistance and corrosion resistance. Controlled manufacturing environment quality and service have won the trust of customers.

While most liquid chromatography autosamplers use 12 x 32 mm vials, the most common HPLC vials are 9 mm screw vials. 9 mm screw vials have openings that are large enough for easy pipetting, but the necks (and closures) are still compatible with most autosamplers in use today.

Material: Borosilicate glass
Finish Type: Screw Neck
Color: Clear / amber
Size: 11.6*32mm
Cap: Black Polypropylene Cap
Closed-top or with 5.5mm center hole
PTFE/silicone Septa
with pre-slit

All Aijiren vials are very suitable for autosamplers and have good chemical compatibility and ultra-cleanliness. The crimp top sample bottle is currently the most commonly used gas sampling bottle on the market. The sample bottle with a volume of 2ml is especially suitable for laboratory use. At the same time, the bottom of some sample bottles is designed with a round bottom, so it has a flat bottom function and is compatible with automatic sampling equipment.

Transparent viale, 33-extended borosicate glass USP type I, Class A
Step-by-step write marking spot area, 0.5, 1.0, and 1.5ml
Strict quality control to ensure a consistent size of each lot of items.
Flat bottom to ensure consistent matching between the vial and the true neck 6mm of the standard glass insert.
Caps are made of high-quality polypropylene to meet accurate manufacturing tolerances
Septum is made of the highest quality materials to ensure proper functioning

The 2ml snap autosampler vial is often used in conjunction with the automatic sampler. The vial is made of colorless Class 1 Type A or Amber Class 1 Type B borosilicate glass with a writable label for sample identification.

11mm Crimp Neck Conical micro-vial for laboratory chromatography experiment, the micro-vial size is 11.6x32mm. 2ml clear glass vial with 0.3ml intergrated vial, designed for valuable samples to save for testing use volume. Bottom fixed micro insert to keep the vial central vertical.

9mm screw thread caps, septa, and vials are designed especially for use with Aijiren’s and other rotating or robotic are samplers
2ml 12*32mm clear borosilicate glass vial,with a write-in patch; high quality polypropylene caps, ptfe / silicone septa can be pre-slit to easy needle penetration

10-425 Wide-opening vials provide an increased target area for easier sample preparation and to reduce the chance of bent or broken needles during sampling,10-425 Vials are manufactured of Clear, Type 1 Class A or Amber, Type 1 Class B borosilicate glass.

Autosampler vials are available in a variety of sizes, with 2 mL vials being the most common size. During the injection process, the autosampler needle pierces the cap and extracts the desired amount of analyte from the vial. There are different types of vials for chromatography applications.

HPLC Chromatography vial is a glass vial used by automatic samplers and headspace samplers such as liquid chromatography, gas chromatography, mass spectrometry, etc. for chromatographic automatic sampling.  Screw Glass vial For autosampler instrument is made of borosilicate glass.

Aijiren 2ml 11mm Snap Ring HPLC Vial is made of transparent type A type 1 or amber type B type 1 type B borosilicate glass. Amber glass can effectively block ultraviolet rays and protect sensitive samples from the volatilization caused by ultraviolet rays. Aijiren 2ml 11mm Snap Ring HPLC Vial has a standard scale and writing area for easy filling and identification.

10mm sample bottles are widely used in the pretreatment of samples analyzed by gas chromatography and liquid chromatography. With the development of testing technology and the improvement of testing standards, the quality requirements for sample bottles have also increased. The 10mm large opening of Aiji can effectively prevent the risk of injection needle deviation.

It is wider than the ordinary Cap, and the Aluminum Cap has good sealing performance. The 5.5mm Center Hole is also convenient for the automatic injection needle in and out. It works very well with Hand Crimper.

Screw Cap Vials are universal. Screwing the cap applies a mechanical force that squeezes the septum between the glass rim and the cap. Screw caps form an excellent seal and mechanically hold the septum in place during piercing. No tools are required for assembly.

Vial micro insert is used to ensure the most accurate and reliable analysis of your lab samples. Micro Inserts allow for maximum sample recovery and easier sample removal when combined with hplc autosampler vials.

Screw cap vials are a practical packaging solution for sample-size health, beauty, and pharmaceutical products. Glass screw cap vials are impermeable and don’t undergo chemical leaching, so your products stay pure. Uses for Screw Cap Vials. Use glass screw cap vials to package sample products or as full-size product packaging options.

The automatic vial is made of high quality raw materials. It has high temperature resistance and corrosion resistance. The septum of the autosample vials is made of high quality materials to ensure proper functioning and is widely used in multiple injection or longer injection cycle designs as well as gas and liquid chromatographs.

Transparent, Type 1 Class A or Amber, Type 1 Class B, Aijiren viale made of borosicate glass
The Aijiren Viale has a standard calibrated write patch that is easy to fill and identify.
Snap caps used in Aijiren vial systems are a convenient replacement for aluminum seals.
Snap caps or aluminum seals ensure safe sealing of samples

These vials are the preferred choice for modern autosamplers. With a focus on improved sample security and integrity, we now offer innovative 9mm closures and 9mm screw top vials for consistent productivity on every separation. Standard opening screw-thread vials are manufactured from borosilicate glass and have a maximum fill volume of 2 ml.

Suit for: 9mm Short Thread Vials
Caps Material: polypropylene
Cap Diameter: 9mm
Cap Features: 6mm Centre Hole or Closed Top
Septa Material: PTFE / Silicone
Septa Feature: Pre-slit I or X
Septa diameter: 9mm
Septa Thickness: 1mm

All Aijiren 11mm Crimp HPLC Vials are ideal for autosamplers and offer excellent chemical compatibility and ultra-cleanlines.
The 11mm Crimp Vial provided by Aijiren is well sealed and suitable for storing samples. It needs to be used with Decrimper and Crimper.

1.5ml 9mm Screw Neck Vial for automatic samplers is made of low metal type 33 and 51 COE borate glass to prevent sample instability or leaching. By selecting the cap and pad, we provide the best sealing solution for the sample.

11mm Natural Snap-top PE Caps, 6mm Centre Hole
White PTFE/Red Silicone Septa 11*1mm
for 11mm Glass Snap Top Vials