Aijiren offer innovative high recovery vials for comprehensive collection, automated handling and storage, with the subsequent maximum retrieval of high value samples. 1.5ml 9mm high Recovery Vials Reduce Residual Product Waste by 99%.

The PP cap will puncture with far less force than needed to puncture a PTFE/Silicone septa, thus minimizing instrument wear and tear as well as downtime. The septa are not resealable and are intended for single use.

Screw Cap Vials are universal. Screwing the cap applies a mechanical force that squeezes the septum between the glass rim and the cap. Screw caps form an excellent seal and mechanically hold the septum in place during piercing. No tools are required for assembly.

Teflon and silicone rubber or ultra-pure silicone are used as raw materials to ensure that the septa are non-toxic; to ensure excellent functions, it is particularly suitable for gas chromatography, and to ensure that the septum does not fall into the sample vial during the injection process

blue screw cap for 9mm screw vials
with pre-slit septa white silicone blue PTFE
size: 9mm*1mm
package: 100pcs/pack

9 mm screw top vial, 32×11.6 mm, clear glass, high recovery, borosilicate glass
1.5ml vial with 30ul reservoir for sample concentration and injection, no transfer to micro insert

Autosampler vials are available in a variety of sizes, with 2 mL vials being the most common size. During the injection process, the autosampler needle pierces the cap and extracts the desired amount of analyte from the vial. There are different types of vials for chromatography applications.

The Screw Caps that are inlcuded with this kit are knurled on the sides for excellent gripping and comfort when applyting to the vial. The silicone rubber / PTFE septa used were designed to provide the right amount of resistance to autosampler needles during the injection process so that they penetrate the vial properly without damaging the septa or the injection needle. Too much or too little resistance to the needles can damage the septa, compromise resealing, cause needle blockage from coring of the septa material and even damage your autosampler. These septa perform even when using a wide range of needles: fine, blunt or even dull. Low sample or solvent evaporation performance even after multiple injections have been observed when using aijiren caps.

Aijiren’s 2ml Glass Vials can be applied in a wide range of fields. Many projects that require chromatographic analysis need to use 2ml Glass Vials, such as environmental analysis, soil analysis, pharmaceutical analysis, food analysis, etc. The aim of Aijiren is to provide high-quality chromatographic consumables for customers of chromatography.

High recovery vials are optimal for manual and automated compound or biological sample applications. High Recovery Vials allow maximum sample extraction without need for separate inserts

2mL Clear Amber Glass Screw Top Autosampler Vials are available in a variety of neck finishes and opening diameters. Large mouth or wide ID vials have approximately a 40% wider mouth opening than standard opening vials. The large opening reduces the risk of bent autosampler needles during sampling. When choosing a 2mL Amber Glass Screw Top Autosampler Vial, the product material is of paramount importance.

The aijiren chromatography sample vial is made of borosilicate glass and meets ASTM TYPE I ClassA and USP TYPE I standards.
There are four types: colorless and amber vial, handwriting area and no handwriting area.

The 9mm 2ml Screw Autosampler Vial for HPLC is a vital component for precise and reliable liquid chromatography analysis. With a capacity of 2ml, these vials provide ample space for sample storage.

Chromatography sample vial is a glass vial used by automatic samplers and headspace samplers such as liquid chromatography, gas chromatography, mass spectrometry, etc. for chromatographic automatic sampling. Its basic requirements are accurate volume, ability to withstand a certain pressure, good sealing performance, and no adsorption to samples.

Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage. One piece polypropylene cap and membrane are also available. These pierceable screw thread caps are designed for one time use and reduce sample preparation time as there is no cap and seal to assemble.

Aijiren’s 9mm Screw Neck Autosampler Vial is one of Aijiren’s most popular products. The screw neck and 2ml capacity are very compatible with the specifications of the autosampler, especially Aijiren’s 100pcs/pack, which is very convenient for customers to use. It is well received, has strong stability and is not easily affected by other reagents.

High recovery Vials are manufactured from heavy wall, low extractable, borosilicate glass providing excellent chemical resistance and durability during packaging and transportation.

1.5ml 9mm Screw Neck Vial for automatic samplers is made of low metal type 33 and 51 COE borate glass to prevent sample instability or leaching. By selecting the cap and pad, we provide the best sealing solution for the sample.

HPLC autosampler vials  are generally categorized by vial diameter, vial height, and thread finish. Clear glass and amber glass have similar inert properties. Amber glass is used to protect sensitive samples from UV light. Markings on the vials provide sample identification information.

Glass Screw Vials ND9mm for HPLC, Clear & Amber, with /without Patch
High Recovery Glass Screw Vials ND9mm, Clear & Amber, with /without Patch
0.3ml Glass Screw Vial integrated with Micro-insert, Base Bonded, Clear & Amber, with /without Patch
PP Screw Vials ND9mm, Clear & Amber
0.3ml PP short Screw Micro Vials, Clear & Amber

Vial Closure Size: 9mm
Vial Volume (Metric) 1.5mL
Volume (Metric) Working 1.3mL
Material: Glass
Color: Amber
Height (Metric) 32mm
Outside Diameter (Metric) 12mm
Residual Volume: <4μL

These vials are the preferred choice for modern autosamplers. With a focus on improved sample security and integrity, we now offer innovative 9mm closures and 9mm screw top vials for consistent productivity on every separation. Standard opening screw-thread vials are manufactured from borosilicate glass and have a maximum fill volume of 2 ml.

Although most laboratories have switched to 9 mm screw thread vials for a wider opening while still being autosampler compatible, some labs use 8-425 vials for storing solvents. The standard opening 8-425 vials have more threads per inch, so there is less likelihood that volatile solvents will evaporate over time.

The China 0.3ml, 9mm, Clear or Amber, Polypropylene Micro Vial is available in disposable and sterile options, catering to different laboratory needs. The disposable vials offer convenience and eliminate the need for cleaning or sterilization, saving valuable time and resources. The sterile vials are pre-sterilized, ensuring contamination-free sample storage and reducing the risk of experimental errors or cross-contamination.

Short Thread Caps with Septa for 9mm 1.5ml HPLC Vial often come with multiple septa options to accommodate different analytical requirements. Depending on the specific application, researchers can choose from various septa materials, such as silicone, PTFE, or bonded septa, to optimize sample compatibility and performance.