1.5ml HPLC Glass High Recovery Vial for Manufacturer Price

9mm screw HPLC autosampler vial can be transparent or amber (mainly used to avoid light) color. The function of the 9mm screw HPLC autosampler vial is manufactured and packaged in an ultra-clean working environment. Certain packaging materials reduce contamination of delivery progress. 9mm screw HPLC autosampler vials can be applied to various types of HPLC and GC equipment especially for Aijiren.

9mm screw thread caps, septa, and vials are designed especially for use with Aijiren’s and other rotating or robotic are samplers
2ml 12*32mm clear borosilicate glass vial,with a write-in patch; high quality polypropylene caps, ptfe / silicone septa can be pre-slit to easy needle penetration

All of Aijiren vials are excellently fitted for autosamplers and have good chemical compatibility and super cleanliness. The crimp top sample vial is the most commonly used gas sampling vial on the market at present. 2ml volume sample vial especially suitable for laboratory use. At the same time, some vial bottoms are designed with round bottoms, so that it has a flat bottoming function and compatibility with automatic sampling equipment.

Aijiren 2ml snap neck has 40% lager target area which makes it much safer for the autosampler needle. Snap vials can be closed with either snap caps or crimp caps. Snap cap vials cannot be pressurized, but can be easy as push-on, pull-off by hand. A audible click ensures a secure seal has been formed and that the cap is correctly aligned. Precision-formed neck improves autosampler handling.

Standard GC, HPLC sample vial, small caliber, 8-425 standard threaded mouth, can be used for autosampler and sample storage. It can be used with 8-425 screw cap septum.
8-425 Autosampler Vial, often used in conjunction with Shimadzu, Spectrophysics, Varian, and other autosamplers. The vial is made of colorless Class 1 Type A or Amber Class 1 Type B borosilicate glass , And attached with a writable label for sample identification.
The vial cap is made of high-quality polypropylene, with precise manufacturing tolerances and a controllable manufacturing environment. The gasket is made of the highest quality PTFE/silicone to ensure the high efficiency of the function.

2ml snap autosampler vial is mainly used in lab chromatography analysis. This 2ml snap top autosampler vial has some features: 1.Extremely high inertness: The inertness of the sample vial can reduce the peak variability of the analyte. 2. Consistent performance: Each batch of the sample vial has consistent performance, which saves you more time for troubleshooting and re-running samples. You can also cooperate with Micro-insert when the sample margin is small.

The Aijiren Crimp top sample vial has excellent sealing performance, which can effectively avoid sample evaporation. The vial and the corresponding 11 mm aluminum cap can be easily and quickly combined with the jaw capping tool. The vial can withstand heat and pressure, and can also be used for chemical reactions. Especially for vials with white open caps and thick PTFE / silicone septa, they can be used as anhydrous and oxygen-free reaction vials.

1.5ml/2ml 8-425 autosampler vial (Shimadzu chromatography sample vial) is provided by Zhejiang Aijiren Rechnology Co., Ltd., instead of imported Shimadzu sample bottle, standard GC, HPLC sample bottle, 5MM caliber, 8-425 standard Threaded port can be used for autosampler and sample storage. It can be used with 8-425 screw cap septum. The bottle cap is made of high-quality polypropylene, and the septum is manufactured with high-quality materials to ensure the efficiency of the function.
Applicable to: Beckman, Diane, Finnigen, Gilson, LKB, Thermoelectric Thermo, Varian Varian, Shimadzu and other autosamplers.

Approximately 40% larger than a normal small neck
The increase of the target area makes sample preparation easier
Large diameter is specially designed for automatic samplers such as Waters
The large-mouth design reduces the probability of bending and damage of the sample needle during the needle sampling process

9-425 Screw Cap 2ml HPLC vial is a type of vial commonly used in High Performance Liquid Chromatography (HPLC) applications. It is designed to hold samples for analysis in HPLC systems.The vial has a capacity of 2ml, which refers to the maximum volume of liquid it can hold. The 9-425 designation indicates the thread size and type of the screw cap, which is compatible with specific autosampler systems.These vials are widely used in chromatography laboratories for the storage and analysis of liquid samples in HPLC systems.

2ml Snap Top HPLC Vial is made of Type 1 borosilicate glass. Comparing with 9mm screw vial, this 2ml Snap Top HPLC Vial mouth is wider opening. So 2ml Snap Top HPLC Vial is easier to fill and provides a larger target area for the autosampler needle. That means, the 2ml Snap Top HPLC Vial can protect the needle.

PTFE (polytetrafluoroethylene) silicon vials, also known as PTFE-lined silicon vials, are specialized containers commonly used in pharmaceutical and laboratory settings. These vials are designed to provide a high level of chemical resistance and inertness, making them suitable for storing and transporting sensitive or reactive substances.TFE silicon vials are commonly used for storing and transporting pharmaceutical drugs, particularly those that are sensitive to interactions with container materials.

2ml Autosampler HPLC Screw glass vials are small containers used in high-performance liquid chromatography (HPLC) analysis. They are designed specifically for use in autosamplers, which are instruments used to inject samples into the HPLC system automatically.
These vials are made of high-quality glass that is resistant to the solvents and chemicals commonly used in HPLC analysis. The vials have a capacity of 5 milliliters, which is the maximum volume of sample they can hold. The vials are typically clear or amber in color, with clear vials allowing for visual inspection of the sample, while amber vials provide protection against light-sensitive samples.

Aijiren is a supplier of Autosampler Vial. Aijiren has been in this industry for more than 10 years. Aijiren’s Vials are of good quality and affordable. And it is suitable for Autosampler of Waters. It can bring a lot of help to the daily experiment of the laboratory.

9mm thread screw neck vial, 32×11.6mm, transparent / amber PP, with graduation line, slightly concave shaped bottom
Preassembled cap and septafor 9mm thread screw PP cap, blue, centrel hole, PTFE/Silicone 9x1mm

4ml borosilicate glass vials are commonly used in high-performance liquid chromatography (HPLC) for sample storage and analysis. Borosilicate glass is preferred in HPLC because it offers excellent chemical resistance and thermal stability, making it suitable for handling a wide range of solvents and temperature conditions.When working with water samples in HPLC, borosilicate glass vials are a suitable choice due to their resistance to water and other polar solvents.

Although most laboratories have switched to 9 mm screw thread vials for a wider opening while still being autosampler compatible, some labs use 8-425 vials for storing solvents. The standard opening 8-425 vials have more threads per inch, so there is less likelihood that volatile solvents will evaporate over time.

Aijiren’s 10-425 screw vial is made of borosilicate hydrochloric acid glass, which has the characteristics of high temperature resistance and corrosion resistance, 10-425 screw vial is very compatible with the automatic sampler with a mechanical arm.

2 ml clear crimp neck vial is a type of vial commonly used in laboratory settings for storing and handling liquid samples or reagents.Clean the vials thoroughly before use to avoid contamination, and use a crimping tool to apply the cap or closure securely.

The Aijiren 8-425 screw cap and vial are suitable for waters and other rotating or robotic arm samplers. The specifications for the 8-425 HPLC sample vial are 12 x 32 mm. The opening of the 8-425 HPLC sample vial is 40% larger than the standard narrow opening vial, preventing syringe problems. Accurately handle bottlenecks and enable the mechanical arm to operate efficiently. The special screw design ensures a consistent seal.

10mm sample bottles are widely used in the pretreatment of samples analyzed by gas chromatography and liquid chromatography. With the development of testing technology and the improvement of testing standards, the quality requirements for sample bottles have also increased. The 10mm large opening of Aiji can effectively prevent the risk of injection needle deviation.

2ml UPLC (Ultra-Performance Liquid Chromatography) is a high-pressure liquid chromatography technique used for separating and analyzing chemical compounds. When working with UPLC, it’s important to choose appropriate vials and caps to ensure sample integrity and compatibility with the system.

The crimp vials produced by Aijiren are made of transparent or amber type 1 borosilicate glass or polypropylene. Requires crimper and lid opener. Very suitable for long-term storage. Deactivation and MS authentication can also be used.

2ml UPLC (Ultra-Performance Liquid Chromatography) glass vial refers to a specific type of vial used in analytical chemistry for storing and handling liquid samples in UPLC systems. UPLC is a high-pressure liquid chromatography technique that allows for fast and efficient separation of compounds in a liquid sample.
These vials are specifically designed to withstand the high pressures and temperatures often encountered in UPLC systems. They are typically equipped with a screw cap or a snap-on cap to provide a secure seal and prevent leakage or contamination of the sample.

2ml Clear/Amber Hplc borosilicate glass vials are commonly used in high-performance liquid chromatography (HPLC) for sample storage and analysis.orosilicate glass is preferred in HPLC because it offers excellent chemical resistance and thermal stability, making it suitable for handling a wide range of solvents and temperature conditions.

Standard GC, HPLC sample vial, small caliber, 8-425 standard threaded mouth, can be used for autosampler and sample storage. It can be used with 8-425 screw cap septum.
8-425 Autosampler Vial, often used in conjunction with Shimadzu, Spectrophysics, Varian, and other autosamplers. The vial is made of colorless Class 1 Type A or Amber Class 1 Type B borosilicate glass , And attached with a writable label for sample identification.