1.5ml Glass High Recovery Vial for Supplier

2ml snap autosampler vial is equipped with PP snap cap. Snap cap can be easy to take away. 2ml snap autosampler vial can be matched with various color of caps. 2ml snap autosampler vial caps bring more convenience to your inventory management. 2ml snap autosampler vial for lab chromatography analysis is also equipped with PTFE/Silicone Septa. This 2ml snap vial septa can total seal the vial. Aijiren has continued to improve septa to actively reduce leaching, chipping, blocking, pushing, stiffening, and adsorption issues.

2ml UPLC (Ultra-Performance Liquid Chromatography) is a high-pressure liquid chromatography technique used for separating and analyzing chemical compounds. When working with UPLC, it’s important to choose appropriate vials and caps to ensure sample integrity and compatibility with the system.

2ml screw cap borosilicate glass vial with closure is a type of laboratory container commonly used for the storage, transport, and handling of liquid or solid samples. It consists of a borosilicate glass vial and a screw cap closure that provides a secure seal. When using screw cap borosilicate glass vials with closures, it is important to handle them carefully to avoid breakage or damage. Proper labeling and documentation should be applied to ensure accurate sample identification and traceability.

The 2ml snap HPLC vial is made of type 1 borosilicate glass. Compared to 9mm screw vials, this 2ml snap hplc vial opening is a wider opening. Therefore, the 2ml snap top HPLC vial is easy to fill and increases the target area of the autosampler needle. This means that 2ml snap-top HPLC vials can protect needles.

The 2ml snap-top HPLC vial size is 11.6x32mm and is compatible with most autosamplers such as Aijiren. 2ml HPLC vials are available in amber and transparent colors. The bottom of the vial is flat. It is convenient to put. Aijiren offers 2ml snap-top HPLC vials and pads at wholesale prices.

Caps with solid PE liners offer good chemical resistance and low moisture vapor transmission rate and is great for nail polish remover and higher concentration acids & alkalis. Good for non-oil products filled at room temperature. Because this lining system is paperless, your samples will not be contaminated with fiber or paper particles from the closure. Available in Phenolic caps.

2ml Clear/Amber Hplc borosilicate glass vials are commonly used in high-performance liquid chromatography (HPLC) for sample storage and analysis.orosilicate glass is preferred in HPLC because it offers excellent chemical resistance and thermal stability, making it suitable for handling a wide range of solvents and temperature conditions.

crimp vial is compatible with all 2mL vial autosamplers, 2mL, 11.6x32mm.11X1mm Teflon/silicone septa, 11mm crimp top sample vials and micro-inner tubes, vapor/liquid vials

Amber Borosilicate Glass
ND9mm Screw Neck Vial
11.6*32mm
With Writing Spot
9mm Blue Short Screw PP Cap
with 6mm Centre Hole
Pre-slit / non-slit PTFE Silicone Septa
Septa Size: 9*1mm

The Aijiren 8-425 screw cap and vial are suitable for waters and other rotating or robotic arm samplers. The specifications for the 8-425 HPLC sample vial are 12 x 32 mm. The opening of the 8-425 HPLC sample vial is 40% larger than the standard narrow opening vial, preventing syringe problems. Accurately handle bottlenecks and enable the mechanical arm to operate efficiently. The special screw design ensures a consistent seal.

Welcome to buy Aijiren 8-425 2ml hplc vial with cap. Aijiren has a large output and can quickly complete the mass production of 2ml hplc vial with cap after you place an order. Aijiren has long-term cooperation with freight forwarders to ensure that you get the goods as soon as possible. To purchase 2ml hplc vial with cap, please choose Aijiren.

11mm Snap Top Closures are made of PP. The translucent Cap design allows users to see the fixed card slot. The inside of the Snap Cap has 4 protrusions for fixing in the lateral groove of the Vial Neck.

2ml Snap Top HPLC Vial size is 11.6x32mm, which can compatible to most autosamplers, such as THERMO FISHER instrument. 2ml HPLC vial is available amber and clear glass. The bottom of vial is flat. It is convenient to put in autosampler. Aijiren supply 2ml snap top HPLC vial and pad in wholesale price. If the sample is scarce, 2ml snap top hplc vial can be used with micro-insert.

2mL Amber Glass Screw Top Autosampler Vials are available in a variety of neck finishes and opening diameters. Large mouth or wide ID vials have approximately a 40% wider mouth opening than standard opening vials. The large opening reduces the risk of bent autosampler needles during sampling. When choosing a 2mL Amber Glass Screw Top Autosampler Vials, the product material is of paramount importance.

Screw-top vials also come in different sizes, with vial caps made of either aluminum for crimp seals or plastic. Glass vials are available in 2 ml volume with a screw top. Inserts work in conjunction with any autosampler and fit either standard or wide openings vials.

Although most laboratories have switched to 9 mm screw thread vials for a wider opening while still being autosampler compatible, some labs use 8-425 vials for storing solvents. The standard opening 8-425 vials have more threads per inch, so there is less likelihood that volatile solvents will evaporate over time.

Screw vials is the most used in 2ml Autosampler vials.It is suitable for THERMO FISHER and other rotary or robotic arm samplers. 40% larger than standard narrow opening vial, prevents syringe problems. The special thread design ensures a consistent seal. Graduated write-on marking spot area, measures 0.5, 1.0 and 1.5ml.The ever flat-bottomed guarantee consistent matching between vials and truly neck 8mm for Standard Glass insert.

1.5ml autosampler GC vial is a type of vial specifically designed for automatic sample injection in gas chromatography (GC) systems. These vials are typically made of glass or plastic and are used to contain liquid or solid samples that will be analyzed using a gas chromatograph.
Autosampler vials are designed to be compatible with automatic sample handling systems, allowing for efficient and precise sample introduction into the GC instrument.

The Crimp Vial produced by Aijiren has a standard 11.6x32mm shape and is compatible with 11mm aluminum sealing caps. Hand Crimper is required for crimp sealing and Decrimper for unsealing. Aijiren provides supporting 11mm Hand Crimper and Decrimper, which are easy to operate and well sealed.

Aijiren 2ml snap neck has 40% lager target area which makes it much safer for the autosampler needle. Snap vials can be closed with either snap caps or crimp caps. Snap cap vials cannot be pressurized, but can be easy as push-on, pull-off by hand. A audible click ensures a secure seal has been formed and that the cap is correctly aligned. Precision-formed neck improves autosampler handling.

Aijiren’s Snap Top Vial is suitable for most Autosamplers on the market, especially Waters’ Autosampler. If you are using Waters’ autosampler, you can consider purchasing Aijiren’s Snap Top Vial for use. The Cap of Snap Top Vial has a center hole to facilitate the automatic injection needle to take samples.

2ml crimp hplc vials vary depending on the filling volume. Distinguish between a standard 2ml crimp hplc vial and a micro vial with a shape that reduces the volume or outer volume. Alternatively, of course, you can use inserts to reduce the capacity in the vial and create ideal conditions for removing samples.

The 2ml crimp hplc vial with insert is larger than the 9mm screw sample vial and has a wider mouth. The 2ml crimp hplc vial features an opening about 40% wider than the standard opening vial. Large openings reduce the risk of autosampler needle bending during sampling.

Standard GC, HPLC sample vial, small caliber, 8-425 standard threaded mouth, can be used for autosampler and sample storage. It can be used with 8-425 screw cap septum.
8-425 Autosampler Vial, often used in conjunction with Shimadzu, Spectrophysics, Varian, and other autosamplers. The vial is made of colorless Class 1 Type A or Amber Class 1 Type B borosilicate glass , And attached with a writable label for sample identification.

Borosilicate glass is a type of glass that is known for its high resistance to heat and thermal shock. It is composed primarily of silica and boron oxide, which give it its unique properties.
Borosilicate glass has a low coefficient of thermal expansion, meaning it does not expand or contract significantly when exposed to changes in temperature. This makes it highly resistant to thermal stress and allows it to withstand rapid temperature changes without breaking.
Overall, borosilicate glass is valued for its exceptional thermal properties, chemical resistance, and optical clarity. Its versatility and durability have made it a preferred material in various industries, particularly in laboratory settings and for specialized glassware applications.

2ml clear crimp top hplc autosampler vial is made of borosilicate glass. Comparing with 2ml amber crimp headspace vial, the 2ml clear crimp top hplc autosampler vial should be made by special process. The appearance of a clear and transparent 2ml crimp top sample hplc vial has attracted widespread attention. 2ml clear crimp top hplc autosampler vial is made by adding UV-absorbed metal oxides to the glass, while using the complementary effect of color, and then adding certain metals or their oxides to fade the colored glass. So in theory, the 2ml clear crimp top HPLC autosampler vial is a little expensive than Amber autosampler vial.

There are three types of 2ml HPLC Vials produced by Aijiren, Screw, Snap and Crimp Top. These three types of Vials can be used for autosamplers, but different bottlenecks are used with different types of machines, but these three types of vials The maximum capacity is 2ml, and you can choose vias with label area on the bottle.

Aijiren screw thread top sample vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called a autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial. The design of Aijiren screw thread top vials are developed from Europe and the United States, and the design feature is easy to use, especially the use of automated sample introduction system. Aijiren screw thread top vials also known as autosampler bottles.