1.3ml Clear 9mm Screw autosampler Vials,High Recovery with 30 uL reservoir,for Laboratory Bottle

Our Headspace Vial features a user-friendly design with a labeling area for easy sample identification and traceability. This enables efficient record-keeping and organization in your laboratory, ensuring accurate tracking and retrieval of crucial analytical information.

Headspace Vials and Closures from Aijiren. Aijiren Technologies headspace vials and closures are engineered to prevent sample contamination and ensure accurate analysis. They are available in a range of sizes and glass types. Choice of crimp or screw top vials; Bevelled top for maximum level of seal security.

A headspace vial is used in the process of top – gas chromatography. When detecting volatile or semi-volatile mixtures with high boiling points, we need to heat them to vaporize them at the top. In this process, since the liquid samples are at the bottom, the material in the top gas can be measured without touching the liquid in the sample vial.

9mm vial micro insert is used to ensure the most accurate and reliable analysis of your lab samples. Micro Inserts allow for maximum sample recovery and easier sample removal when combined with hplc autosampler vials.

Aijiren is usually packaged in PP box, 100 pieces are sold in a box. Closures can be packaged separately. As a production company, Aijiren can provide a large amount of spot production, and it can also meet multiple orders at the same time. Aijiren¡¯s lowest price The order quantity is 10 boxes, because sending too few products overseas will cause the postage to be higher than the product cost.

Aijiren’s 9-425 Autosampler Vials are available in clear and amber colors, and Aijiren produces Cap with Septa that is matched with 9-425 Autosampler Vials. Only the Closures made of Screw Thread’s 9mm diameter PP are compatible. Septa uses PTFE and Silicone is compounded without adhesives to ensure the stiffness and quality of Septa.

Snap seal vials are less prone to breakage during decapping because more glass is used in the neck of the vial. The snap seal neck finish is compatible with either crimp and/or snap seals and no special tools are required to remove the cap. These vials are recommended for short term sample storage and non-volatile samples because the seal is not as secure as a crimp or screw thread seal.

IV250 vial insert
Conical Bottom
31*5.7mm
suit for 9mm, 10mm, 11mm vials

The material of the headspace bottle is borosilicate glass with low extraction rate, which has low expansion rate, high temperature resistance, high strength, high hardness, high light transmittance and high chemical stability. The headspace sample bottle is suitable for headspace analysis of volatile solids and gases.

The 18mm screw thread 10ml gc vial produced by Aijiren has a specification of 22.5*46mm, and the glass is borosilicate glass, all of which are 5.0 type. The round bottom design prevents reagents from remaining on the bottom of the 18mm screw thread 10ml gc vial. Amber glass can protect samples sensitive to light.

In addition to HPLC, syringe filters have a multitude of other applications. A syringe filter adds a few minutes and a minimal expense to your testing process, but you will see a big return on your investment. Small volume venting£¬HPLC sample preparation£¬Removal of protein precipitates£¬Routine QC analysis£¬Dissolution testing.

Aijiren has always insisted on using high-quality glass, because only the quality of the glass is high enough to be compatible with more samples and more convenient for customers to experiment. Therefore, Aijiren decided on borosilicate glass after various comparisons. This glass is not only resistant to high temperature and corrosion It is also inert and not easily broken, which is very suitable for large-capacity 60ml sample storage vial.

Headspace vials are made of Aijiren’s borosilicate glass. The 18 mm screw-neck headspace vials with magnetic screw seals for CTC are new in the headspace market where crimped necks dominate.

Aijiren’s 9mm Screw Cap with Septa is automatically produced by machines. The same batch specifications meet the needs of customers for experiments. And mass production can also meet the orders of customers around the world, and mass orders can also be satisfied. Because of this, Aijiren’s fast shipping speed and good product quality have enabled Aijiren to become a world-renowned supplier of chromatography consumables.

COD testing is a good better indicator of organic pollutants in industrial wastewater containing cyanides and heavy metals. COD testing affords rapid response to changing conditions before critical problems develop.

Metal caps offer the widest range of temperature tolerances and are very resistant to fracture from impact. Metal caps are great for gas chromatography applications. A metal closure is manufactured from either steel (coated with anti-corrosive coating of either chromeplate or tinplate) or aluminum.

Vial closures are the components used to seal and secure vials, which are small containers typically made of glass or plastic.
Vial closures play a crucial role in maintaining the integrity of the contents within the vial, preventing leakage, contamination, and evaporation.
An aluminum cap for vials refers to a closure made of aluminum that is used to seal and secure vials. Aluminum caps are commonly used in various industries, including pharmaceuticals, laboratories, and food and beverage.