0.45 PTFE Pink Syringe Filter

Syringe filter is a small, disposable device that is commonly used in laboratory settings to filter or clarify fluids. It is designed to be attached to the end of a syringe and acts as a barrier that removes particles and contaminants from the fluid as it is forced through the filter.
Syringe filters typically consist of a plastic housing with a membrane filter inside. The housing has a female luer lock or luer slip connection that allows it to be securely attached to the syringe. The membrane filter, which is the key component, is made of a porous material that allows the fluid to pass through while retaining particles and contaminants above a certain size.

Compared with Nitrocellulose membrane (NC membrane), PVDF membrane has many advantages. PVDF membrane has high mechanical strength, is not easy to break or curl; it has the advantages of low background, wide solvent compatibility, and excellent coloring ability; in addition, PVDF membrane can be repeatedly tested after proper treatment.

Syringe filtration is a crucial technique in laboratory settings, playing a vital role in sample preparation for various analytical methods.

By using Aijiren syringe filters unwanted particles are removed which can otherwise cause contamination and clogging of sensitive instrumentation. So, filtering your samples leads to an increase of lifetime and less downtime of chromatographic columns and equipment, gives more consistent and reproducible results and thereby saves time and money.

Your benefits when using Aijiren syringe filters£ºDifferent membrane types to meet multiple filtration needs. Low content of extractable compounds. Fast flow geometry for easy filtration. Low hold-up volume for maximum filtrate recovery. HPLC certified

Polypropylene is compatible with acetone, ethyl acetate, methanol, isobutanol, methanol and methyl ethyl ketone. Polypropylene is incompatible with cyclohexane, ether, dichlorobenzene, pentane, methylene chloride and trichlorobenzene. It is recommended to use gas, disinfectant or autoclave to sterilize products made of polypropylene. The maximum operating temperature is 135¡ãC.

This nylon membrane can be used for alkaline blotting and fixation, but if fixing methods such as baking and ultraviolet rays are used, higher nucleic acid detection sensitivity can be obtained. Since the nylon membrane is a hydrophilic membrane, it does not need to be immersed in ethanol, methanol and other solutions for activation. This product is only for scientific research by professionals, and must not be used for clinical diagnosis or treatment, or used for food or medicine, and must not be stored in ordinary residences. For your safety and health, please wear lab coats and disposable gloves for operation.

A syringe filter (or wheel filter) is a single-use, membrane-based device used for the removal of particulate impurities from small (≤ 100 mL) liquid samples. Selected based upon the desired end application, disposable syringe filters are commonly used in labs for fast and efficient filtering, material purification, or even sterilization.

Syringe filters are made of many different types of materials. Various materials, diameters, pore sizes, and sterile and non-sterile options are on our list. These syringe filters provide excellent microfiltration performance for HPLC, water treatment, environment, biotechnology, beverage, food, pharmaceutical and other related fields.

In order to filter the particles correctly, you need to find the right size filter. You should choose the diameter of the filter carefully. They usually have sizes of 13mm, 25mm and 30mm. Each of these has a different ability to hold particles. According to the sample size, you can choose the appropriate filter diameter. For example, a diameter of 13 mm can be used for 1-10 ml samples. Similarly, 25 mm PVDF syringe filters can be used for sample volumes of 10-100 ml. Their retention is less than 100 ml.

These syringe filters feature a user-friendly design that allows for easy and efficient filtration. They are compatible with standard luer-lock syringes, providing a secure and leak-free connection. The nylon membrane has a small pore size, typically ranging from 0.2μm to 0.45μm, enabling efficient removal of contaminants while retaining the desired analytes. The filters provide high flow rates and low protein binding, making them suitable for a variety of sample types.

Aijiren’s expert staff is available via live chat and email to help you decide on the best membrane filter for your needs. Email us, and our helpful customer representatives will respond promptly¡ªin just one business day or sooner. And if you still need help deciding on the right product, we¡¯ll ship you a sample to ensure you receive the best membrane filter for your needs.

Aijiren’s CA Syringe Filter 90% is exported to the world’s major economically developed countries. Filters can provide foundry services according to customer needs. The produced filters have good consistency between batches, and there are strict control procedures from raw materials to production processes to in and out of warehouse delivery management to ensure the quality and use value of the products.

In addition to HPLC, syringe filters have a multitude of other applications. A syringe filter adds a few minutes and a minimal expense to your testing process, but you will see a big return on your investment. Small volume venting£¬HPLC sample preparation£¬Removal of protein precipitates£¬Routine QC analysis£¬Dissolution testing.

Aijiren PP syringe filter
Product Model: 25mm,0.22um Sterilization Independent Packaging
Application: sterilize and filter the aqueous solution
Operating temperature: 45¡ãC
Inlet pressure: bar (psi): 5.2 (75)
Wettability: hydrophilic
Filter membrane diameter: 25mm
Membrane aperture: 0.22um

PVDF syringe filters have excellent chemical compatibility, mechanical strength and low extractability. In these filters, the maximum allowable housing pressure is 150 psi. It improves the filtering speed. These filters have high temperature resistance due to their materials. They have excellent flow rate and temperature stability.

Aijiren Syringe Filters is a comprehensive range of non-sterile disposable syringe filters for reliable sample preparation. Reproducible membrane quality and automated manufacturing processes ensure particulates are removed from each and every sample, extending analytical column lifetime and minimising injection port or valve damage.

1. The pore size of the needle-punched membrane is accurate, providing comprehensive protection for your instrument and chromatographic column
2. There is a clear label on the Nylon syringe filter to avoid confusion
3. The luer interface of the needle filter with lock can prevent the filter from flying out due to excessive pressure

A syringe filter (sometimes called a wheel filter for its wheel-like shape) is a single-use membrane based filter cartridge, to be attached with a syringe to remove impurities in liquid solutions. This pre-filtration step is vital in preventing damage to instruments (e.g. liquid chromatography, ICP, etc.).

The shell of PTFE Syringe Filter is made of polypropylene (PP) with excellent chemical stability. It is made of different colors, which is convenient for users to distinguish products of different materials and avoid confusion. The filter membrane adopts imported high-performance filter membrane with stable product quality and good reproducibility. It is an ideal choice for laboratory filtration of samples. The standard interface is convenient to connect to various syringes, and it can also be directly connected to the needle of the 7725 valve, and the sample can be injected directly after filtration.

Aijiren manufactures a Syringe Filter that comes in a number of different membranes, PTFE membranes are hydrophilic and inert and fit many different types of agents, the details below contain the chemicals compatible with the PTFE Syringe Filter. In addition, the article number and specific specifications of Aijiren PTFE have been clearly described. If you have any needs, please leave a comment below for inquiry.

0.45 syringe filters are commonly used in research and laboratory settings for a variety of filtration applications. They are known for their ability to remove particles and microorganisms from solutions, making them a valuable tool in many scientific fields. However, with so many options and considerations to take into account when selecting a syringe filter, it is common to have questions and concerns.
In this article, we will address 20 frequently asked questions about 0.45 syringe filters and provide comprehensive answers to help you make informed decisions about your filtration needs.Filter your sample before chromatography instrument, it can help your chromatography instrument. Aijiren lab membrane syringe filter is the best choice.

The Syring Filter with nylon membrane produced by Aijiren has good hydrophilicity, acid and alkali resistance, and oxidation resistance. It is not only suitable for aqueous solutions containing acids and alkalis, but also for organic solvents such as alcohols, hydrocarbons, lipids, phenols, ketones and other organic solvents. It can be used for organic solvents such as strong acid, 70% ethanol, dichloromethane and so on. High temperature resistance, good strength, stable chemical properties.

Use Aijiren CA syringe filter to remove interfering substances and fine particles to the rated pore size, thereby obtaining a cleaner sample extract. Cellulose acetate (CA) syringe filters are ideal for filtering tissue culture media and filtering sensitive biological samples. Adding a syringe filtration step before chromatographic injection not only helps to ensure more consistent and reliable results, it also helps protect the instrument and extend the life of the column. Economical choice Syringe filters are available in a variety of sizes and membrane types to meet the needs of any application.

Selected PES syringe filters provide a cleaner sample extract by removing interfering materials and fine particles down to the rated pore size. Performing a syringe filtration step before chromatographic injection helps ensure more consistent and reliable results, and helps protect delicate instruments and extend column life.

The syringe filter has the following characteristics:
1. Convenient, readily available, easy to operate, economical and practical.
2. Reliable bacteria retention efficiency ensures the filtering and sterilization effect.
3. Larger effective membrane filtration area: 1.09cm2.
4. High flow rate, high throughput, dead volume no more than 10¦Ìl.
5. Very low protein adsorption.
6. Pass HPLC dissolution test.

Use a disposable filter and a disposable sterile syringe to filter and sterilize, first suck the solution to be filtered into the syringe, and then pressure the solution into the sterile container under the filter (which contains a filter membrane with a pore size of 0.22 microns) ,This is done. If the amount of solution to be filtered is large, you can purchase a filter device with a pump.