2mL Amber Glass Screw Top Autosampler Vials are available in a variety of neck finishes and opening diameters. Large mouth or wide ID vials have approximately a 40% wider mouth opening than standard opening vials. The large opening reduces the risk of bent autosampler needles during sampling. When choosing a 2mL Amber Glass Screw Top Autosampler Vials, the product material is of paramount importance.

If the weight, damage, surface inertness, and/or disposal costs of the glass vial are concerned, the vial manufactured from polypropylene is an alternative to consideration. The benefits of polypropylene materials include low extraction rates, compatibility with many solvents, ideal for working with proteins, ideal for ion chromatography applications, ideal for pH-sensitive sample storage, and eliminate the need for inserts during microsampling.

Suit for: 9mm Short Thread Vials
Caps Material: polypropylene
Cap Diameter: 9mm
Cap Features: 6mm Centre Hole or Closed Top
Septa Material: PTFE / Silicone
Septa Feature: Pre-slit I or X
Septa diameter: 9mm
Septa Thickness: 1mm

Aijiren offer innovative high recovery vials for comprehensive collection, automated handling and storage, with the subsequent maximum retrieval of high value samples. 1.5ml 9mm high Recovery Vials Reduce Residual Product Waste by 99%.

 9mm Screw conical micro-vial for lab chromatography experiment, the micro-vial size is 11.6x32mm.  High quality glass vial for HPLC/GC analysis. 0.3 ml clear or amber  glass micro insert fixed in 2ml glass vial.

The Screw Caps that are inlcuded with this kit are knurled on the sides for excellent gripping and comfort when applyting to the vial. The silicone rubber / PTFE septa used were designed to provide the right amount of resistance to autosampler needles during the injection process so that they penetrate the vial properly without damaging the septa or the injection needle. Too much or too little resistance to the needles can damage the septa, compromise resealing, cause needle blockage from coring of the septa material and even damage your autosampler. These septa perform even when using a wide range of needles: fine, blunt or even dull. Low sample or solvent evaporation performance even after multiple injections have been observed when using aijiren caps.

Teflon and silicone rubber or ultra-pure silicone are used as raw materials to ensure that the septa are non-toxic; to ensure excellent functions, it is particularly suitable for gas chromatography, and to ensure that the septum does not fall into the sample vial during the injection process

Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage. One piece polypropylene cap and membrane are also available. These pierceable screw thread caps are designed for one time use and reduce sample preparation time as there is no cap and seal to assemble.

The 9mm hplc vials produced by Aijiren can be used in many places and scenarios. The GC System is just one of them. More often, the 9mm hplc vials produced by Aijiren are used in different Autosamplers. Its compatibility is a major part of its popularity. the reason. Aijiren’s 9mm hplc vials is one of the most popular products.

Aijiren screw thread top sample vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called a autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial. The design of Aijiren screw thread top vials are developed from Europe and the United States, and the design feature is easy to use, especially the use of automated sample introduction system. Aijiren screw thread top vials also known as autosampler bottles.

Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage. One piece polypropylene cap and membrane are also available. These pierceable screw thread caps are designed for one time use and reduce sample preparation time as there is no cap and seal to assemble.

These vials are the preferred choice for modern autosamplers. With a focus on improved sample security and integrity, we now offer innovative 9mm closures and 9mm screw top vials for consistent productivity on every separation.
Standard opening screw-thread vials are manufactured from borosilicate glass and have a maximum fill volume of 2 ml.

screw vials are also available in different sizes, and the cap is made of PP for sealing. The glass vial has a maximum capacity of 2ml and has a screw cap. The insert can be used with any autosampler and fits standard or wide-mouth vials.

The transparent glass threaded sample bottle is 2mL, 12x32mm, and has an advanced sample bottle sealing system. The screw vial can prevent the septum from being pressed in, and can provide a stop point for the bottle cap to prevent over-tightening or over-tightening, and it can provide the best and consistent seal every time.

The non-pre-slit septas help to reduce carryover from vial to vial because the resealing characteristics of the septum act as a squeegee to wipe solution from the outside of the needle. Typically, a non-slit septum exhibits resealing capabilities for a limited number of needle punctures but for long-term storage in the vial, using a new non-punctured septum is best practice.

Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage. One piece polypropylene cap and membrane are also available. These pierceable screw thread caps are designed for one time use and reduce sample preparation time as there is no cap and seal to assemble.

The 9mm screw cap is made from high-quality material, providing excellent durability and chemical resistance. Its precise threading allows for easy and efficient sealing, ensuring a reliable closure for HPLC vials. The septa, made of a specialized material, offers optimal inertness and compatibility with a wide range of samples, ensuring accurate and reproducible results in HPLC analysis.

Aijiren focus on improving the safety and integrity of our samples. Aijiren provide innovative 9mm thread caps and 9mm 2ml Hplc Screw Vials to ensure consistent productivity in all separation processes. These vials are the best choice for the latest autosampler. Standard open screw vials are made of borosilicate glass with a maximum filling volume of 2ml.

The 2ml 9mm HPLC Autosampler Vials also offers a variety of closures, including crimp/snap or threaded closures. Screw-type closures can also be of different sizes identified by the outer diameter of the vials. If you use an autosampler, choose the 2ml 9mm HPLC Autosampler Vials for your specific equipment brand. 2ml 9mm HPLC Autosampler Vials work with Aijiren autosamplers.

1.5ml 9mm Screw Neck Vial for automatic samplers is made of low metal type 33 and 51 COE borate glass to prevent sample instability or leaching. By selecting the cap and pad, we provide the best sealing solution for the sample.

Chromatography sample vial is a glass vial used by automatic samplers and headspace samplers such as liquid chromatography, gas chromatography, mass spectrometry, etc. for chromatographic automatic sampling. Its basic requirements are accurate volume, ability to withstand a certain pressure, good sealing performance, and no adsorption to samples.

Product name: 1.5/2ml sample vial plastic PP material

Packing: vial, boxed (100 pcs/box)/caps and septa  bag (100 pcs/pack)
Size: Vial (11.6*32mm) / Gasket (Φ9*1mm)
Material: Vial (PP) / Gasket (Teflon / Silicone) / Cap (Polypropylene)
Gasket performance: acid resistance, alkali resistance, temperature resistance, anti-sticking